X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=NEWS;h=5bb6e5e7bba483d76bcca6c72b45eb8b8199ea64;hb=4e077fddadd7d8fedacc61f59ce18a700f6759cf;hp=ae08858afb3fda17b4bd888f865e6d9defe396fa;hpb=086a523ca816160e44b20f8b43204e2dc333d25e;p=openocd.git diff --git a/NEWS b/NEWS index ae08858afb..5bb6e5e7bb 100644 --- a/NEWS +++ b/NEWS @@ -2,105 +2,126 @@ This file includes highlights of the changes made in the OpenOCD source archive release. JTAG Layer: - * New CMSIS-DAP driver - * Andes AICE debug adapter support - * New OpenJTAG driver - * New BCM2835 (RaspberryPi) driver - * JTAG VPI client driver (for OpenRISC Reference Platform SoC) - * Xilinx BSCAN_* for OpenRISC support - * ST-LINKv2-1 support - * ST-LINKv2 SWO tracing support (UART emulation) - * JLink-OB (onboard) support - * Altera USB Blaster driver rewrite, initial Blaster II - support - * ULINK driver ported to libusb-1.0, OpenULINK build fixes - * Support up to 64 bit IR lengths - * SVF playback (FPGA programming) fixes - * "ftdi" interface driver got extensive testing and is now - recommended over the old ft2232 implementation + * add default to adapter speed when unspecified (100 kHz) + * AM335X gpio (BeagleBones) adapter driver + * BCM2835 support for SWD + * Cadence Virtual Debug (vdebug) adapter driver + * CMSIS-DAP support for SWO and SWD multidrop + * Espressif USB JTAG Programmer adapter driver + * Remote bitbang support for Windows host + * ST-LINK add TCP server support to adapter driver + * SWD multidrop support Boundary Scan: Target Layer: - * New target: Andes nds32 - * New target: OpenRISC OR1K - * New target: Intel Quark X10xx - * MIPS EJTAG 1.5/2.0 support - * MIPS speed improvements - * Cortex-M, Cortex-A (MEM-AP, APB-AP) targets working with BE - hosts now - * XScale vector_catch support, reset fixes - * dsp563xx ad-hoc breakpoint/watchpoint support - * RTOS support for embKernel - * Target profiling improvements - * Memory access functions testbench + * aarch64: support watchpoints + * arm: support independent TPIU and SWO for trace + * arm adi v5: support Large Physical Address Extension + * arm adi v6: support added, for jtag and swd transport + * cortex_a: support watchpoints + * elf 64bit load support + * Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores + * semihosting: support user defined operations + * Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP Flash Layer: - * STM32 family sync with reference manuals, other bugfixes - * STM32F401, STM32F07x support - * Atmel SAM4L, SAMG5x support - * at91sam3sd8{a,b}, at91sam3s8{a,b,c}, at91sam4s, - at91sam3n0{a,b,0a,0b} support, bugfixes - * Atmel SAMD support - * Milandr 1986ВЕ* support - * Kinetis KL, K21 support - * Nuvoton NuMicro MINI5{1,2,4} support - * Nuvoton NUC910 series support - * NXP LPC43xx, LPC2000 fixes - * NXP LPC800, LPC810 support - * More ATmega parts supported - * Fujitsu MB9Ax family support - * EFM32 Wonder Gecko family support - * Nordic nRF51 support + * Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support + * GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support + * Nuvoton NPCX series support + * onsemi RSL10 support + * Raspberry Pi Pico RP2040 support + * ST BlueNRG-LPS support + * ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support + * ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support Board, Target, and Interface Configuration Scripts: - * STM32W108xx generic target config - * STM32F429 discovery board config - * STM32 Nucleo boards configs - * DENX M53EVK board config - * Altera Cyclone V SoC, SoCkit config - * New TI Launchpads board configs - * TI am43xx devices, AM437x GP EVM, AM438x ePOS EVM board - configs - * Marvell Armada 370 family initial support - * TI TMDX570LS31USB (TMS570, Cortex-R4) support scripts - * Freescale FRDM-KL25Z, KL46Z board configs - * Digilent Zedboard config - * Asus RT-N16, Linksys WRT54GL board configs - * Atmel Xplained initial support - * Broadcom bcm28155_ap board config - * TUMPA, TUMPA Lite interface configs - * Digilent JTAG-SMT2 interface config - * New RAM testing functions - * Easy-to-use firmware recovery helpers targetting ordinary - users with common equipment + * Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max ("Mystique") board config + * Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board config + * Digilent Nexys Video board config + * Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config + * Espressif ESP32 via ESP USB Bridge generic board config + * Espressif ESP32-S2 Kaluga 1 board config + * Espressif ESP32-S2 with ESP USB Bridge board config + * Espressif ESP32-S3 example board config + * Kontron SMARC-sAL28 board config + * LambdaConcept ECPIX-5 board config + * Microchip ATSAMA5D27-SOM1-EK1 board config + * Microchip EVB-LAN9255 board config + * Microchip SAME51 Curiosity Nano board config + * NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config + * NXP RT6XX board config + * Olimex H405 board config + * Radiona ULX3S board config + * Raspberry Pi 3 and Raspberry Pi 4 model B board config + * Raspberry Pi Pico-Debug board config + * Renesas R-Car V3U Falcon board config + * ST BlueNRG-LPS steval-idb012v1 board config + * ST NUCLEO-8S208RB board config + * ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config + * ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config + * ST STM32MP13x-DK board config + * TI AM625 EVM, AM642 EVM and AM654 EVM board config + * TI J721E EVM, J721S2 EVM and J7200 EVM board config + * Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max ("Mystique") target config + * Cadence Xtensa generic and Xtensa VDebug target config + * Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config + * Espressif ESP32, ESP32-S2 and ESP32-S3 target config + * Microchip ATSAMA5D2 series target config + * NanoXplore NG-Ultra SoC target config + * NXP IMX8QM target config + * NXP LS1028A, LS1046A and LS1088A target config + * NXP RT600 (Xtensa HiFi DSP) target config + * onsemi RSL10 target config + * Raspberry Pi Pico RP2040 target config + * Renesas R8A779A0 V3U target config + * Renesas RZ/Five target config + * Renesas RZ/G2 MPU family target config + * Rockchip RK3399 target config + * ST BlueNRG-LPS target config + * ST STM32MP13x target config + * TI AM625, AM654, J721E and J721S2 target config + * Ashling Opella-LD interface config + * Aspeed AST2600 linuxgpiod based interface config + * Blinkinlabs JTAG_Hat interface config + * Cadence Virtual Debug (vdebug) interface config + * Espressif ESP32-S2 Kaluga 1 board's interface config + * Espressif USB Bridge jtag interface config + * Infineon DAP miniWiggler V3 interface config + * PLS SPC5 interface config + * Tigard interface config + * Lattice MachXO3 family FPGA config Server Layer: - * Auto-generation of GDB target description for ARMv7-M, - ARM4, nds23, OR1K, Quark - * GDB File-I/O Remote Protocol extension support - * Default GDB flashing events handlers to initialise and reset - the target automatically when "load" is used + * GDB: add per-target remote protocol extensions + * GDB: more 'Z' packets support + * IPDBG JtagHost server functionality + * semihosting: I/O redirection to TCP server + * telnet: support for command's autocomplete + +RTOS: + * 'none' rtos support + * Zephyr rtos support Documentation: - * Extensive README* changes - * The official User's Guide was proofread - * Example cross-build script - * RTOS documentation improvements - * Tcl RPC documentation added Build and Release: - * *BSD, OS X, clang, ARM, windows build fixes - * New pkg-config support changes the way libusb (and other - dependencies) are handled. Many adapter drivers are now - selected automatically during the configure stage. + * Add json extension to jimtcl build + * Drop dependency from libusb0 + * Drop repository repo.or.cz for submodules + * Move gerrit to https://review.openocd.org/ + * Require autoconf 2.69 or newer + * Update jep106 to revision JEP106BE + * Update jimtcl to version 0.81 + * Update libjaylink to version 0.3.1 + * New configure flag '--enable-jimtcl-maintainer' for jimtcl build This release also contains a number of other important functional and cosmetic bugfixes. For more details about what has changed since the last release, see the git repository history: -http://sourceforge.net/p/openocd/code/ci/v0.8.0/log/?path= +http://sourceforge.net/p/openocd/code/ci/v0.12.0-rc2/log/?path= For older NEWS, see the NEWS files associated with each release