X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=src%2Fjtag%2Fft2232.c;h=773a92e6942196963f48bca5535154aad9675990;hb=508ed7a7c69f74ed889e1b471929d9e68e5c1194;hp=7d2fac08900a0f4123d107fb7535d89dce7fe6f5;hpb=5fcd1d704cea078f6651e8e928ce7ff67b283882;p=openocd.git diff --git a/src/jtag/ft2232.c b/src/jtag/ft2232.c index 7d2fac0890..773a92e694 100644 --- a/src/jtag/ft2232.c +++ b/src/jtag/ft2232.c @@ -2,6 +2,9 @@ * Copyright (C) 2004, 2006 by Dominic Rath * * Dominic.Rath@gmx.de * * * + * Copyright (C) 2008 by Spencer Oliver * + * spen@spen-soft.co.uk * + * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * * the Free Software Foundation; either version 2 of the License, or * @@ -23,7 +26,6 @@ #if IS_CYGWIN == 1 #include "windows.h" -#undef ERROR #endif #include "replacements.h" @@ -47,9 +49,6 @@ #include #endif -#include -#include - /* enable this to debug io latency */ #if 0 @@ -65,18 +64,27 @@ int ft2232_execute_queue(void); int ft2232_speed(int speed); +int ft2232_speed_div(int speed, int *khz); +int ft2232_khz(int khz, int *jtag_speed); int ft2232_register_commands(struct command_context_s *cmd_ctx); int ft2232_init(void); int ft2232_quit(void); int ft2232_handle_device_desc_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); +int ft2232_handle_serial_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); int ft2232_handle_layout_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); int ft2232_handle_vid_pid_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); +int ft2232_handle_latency_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc); char *ft2232_device_desc = NULL; +char *ft2232_serial = NULL; char *ft2232_layout = NULL; -u16 ft2232_vid = 0x0403; -u16 ft2232_pid = 0x6010; +unsigned char ft2232_latency = 2; + +#define MAX_USB_IDS 8 +/* vid = pid = 0 marks the end of the list */ +static u16 ft2232_vid[MAX_USB_IDS+1] = { 0x0403, 0 }; +static u16 ft2232_pid[MAX_USB_IDS+1] = { 0x6010, 0 }; typedef struct ft2232_layout_s { @@ -90,22 +98,40 @@ typedef struct ft2232_layout_s int usbjtag_init(void); int jtagkey_init(void); int olimex_jtag_init(void); +int flyswatter_init(void); +int turtle_init(void); +int comstick_init(void); +int stm32stick_init(void); +int axm0432_jtag_init(void); /* reset procedures for supported layouts */ void usbjtag_reset(int trst, int srst); void jtagkey_reset(int trst, int srst); void olimex_jtag_reset(int trst, int srst); +void flyswatter_reset(int trst, int srst); +void turtle_reset(int trst, int srst); +void comstick_reset(int trst, int srst); +void stm32stick_reset(int trst, int srst); +void axm0432_jtag_reset(int trst, int srst); /* blink procedures for layouts that support a blinking led */ void olimex_jtag_blink(void); +void turtle_jtag_blink(void); ft2232_layout_t ft2232_layouts[] = { {"usbjtag", usbjtag_init, usbjtag_reset, NULL}, {"jtagkey", jtagkey_init, jtagkey_reset, NULL}, {"jtagkey_prototype_v1", jtagkey_init, jtagkey_reset, NULL}, + {"oocdlink", jtagkey_init, jtagkey_reset, NULL}, {"signalyzer", usbjtag_init, usbjtag_reset, NULL}, + {"evb_lm3s811", usbjtag_init, usbjtag_reset, NULL}, {"olimex-jtag", olimex_jtag_init, olimex_jtag_reset, olimex_jtag_blink}, + {"flyswatter", flyswatter_init, flyswatter_reset, NULL}, + {"turtelizer2", turtle_init, turtle_reset, turtle_jtag_blink}, + {"comstick", comstick_init, comstick_reset, NULL}, + {"stm32stick", stm32stick_init, stm32stick_reset, NULL}, + {"axm0432_jtag", axm0432_jtag_init, axm0432_jtag_reset, NULL}, {NULL, NULL, NULL}, }; @@ -131,16 +157,13 @@ static int ft2232_expect_read = 0; #define BUFFER_ADD ft2232_buffer[ft2232_buffer_size++] #define BUFFER_READ ft2232_buffer[ft2232_read_pointer++] -jtag_interface_t ft2232_interface = +jtag_interface_t ft2232_interface = { - .name = "ft2232", - .execute_queue = ft2232_execute_queue, - - .support_pathmove = 1, - .speed = ft2232_speed, + .speed_div = ft2232_speed_div, + .khz = ft2232_khz, .register_commands = ft2232_register_commands, .init = ft2232_init, .quit = ft2232_quit, @@ -154,26 +177,26 @@ int ft2232_write(u8 *buf, int size, u32* bytes_written) if ((status = FT_Write(ftdih, buf, size, &dw_bytes_written)) != FT_OK) { *bytes_written = dw_bytes_written; - ERROR("FT_Write returned: %i", status); + LOG_ERROR("FT_Write returned: %lu", status); return ERROR_JTAG_DEVICE_ERROR; } else { *bytes_written = dw_bytes_written; - return ERROR_OK; + return ERROR_OK; } #elif BUILD_FT2232_LIBFTDI == 1 int retval; if ((retval = ftdi_write_data(&ftdic, buf, size)) < 0) { *bytes_written = 0; - ERROR("ftdi_write_data: %s", ftdi_get_error_string(&ftdic)); + LOG_ERROR("ftdi_write_data: %s", ftdi_get_error_string(&ftdic)); return ERROR_JTAG_DEVICE_ERROR; } else { *bytes_written = retval; - return ERROR_OK; + return ERROR_OK; } #endif } @@ -183,32 +206,44 @@ int ft2232_read(u8* buf, int size, u32* bytes_read) #if BUILD_FT2232_FTD2XX == 1 DWORD dw_bytes_read; FT_STATUS status; - if ((status = FT_Read(ftdih, buf, size, &dw_bytes_read)) != FT_OK) + int timeout = 5; + *bytes_read = 0; + + while ((*bytes_read < size) && timeout--) { - *bytes_read = dw_bytes_read; - ERROR("FT_Read returned: %i", status); - return ERROR_JTAG_DEVICE_ERROR; + if ((status = FT_Read(ftdih, buf + *bytes_read, size - + *bytes_read, &dw_bytes_read)) != FT_OK) + { + *bytes_read = 0; + LOG_ERROR("FT_Read returned: %lu", status); + return ERROR_JTAG_DEVICE_ERROR; + } + *bytes_read += dw_bytes_read; } - *bytes_read = dw_bytes_read; - return ERROR_OK; - #elif BUILD_FT2232_LIBFTDI == 1 int retval; int timeout = 100; *bytes_read = 0; - + while ((*bytes_read < size) && timeout--) { if ((retval = ftdi_read_data(&ftdic, buf + *bytes_read, size - *bytes_read)) < 0) { *bytes_read = 0; - ERROR("ftdi_read_data: %s", ftdi_get_error_string(&ftdic)); + LOG_ERROR("ftdi_read_data: %s", ftdi_get_error_string(&ftdic)); return ERROR_JTAG_DEVICE_ERROR; } *bytes_read += retval; } - return ERROR_OK; #endif + + if (*bytes_read < size) + { + LOG_ERROR("couldn't read the requested number of bytes from FT2232 device (%i < %i)", *bytes_read, size); + return ERROR_JTAG_DEVICE_ERROR; + } + + return ERROR_OK; } int ft2232_speed(int speed) @@ -218,37 +253,91 @@ int ft2232_speed(int speed) u32 bytes_written; buf[0] = 0x86; /* command "set divisor" */ - buf[1] = speed & 0xff; /* valueL (0=6MHz, 1=3MHz, 2=1.5MHz, ...*/ + buf[1] = speed & 0xff; /* valueL (0=6MHz, 1=3MHz, 2=2.0MHz, ...*/ buf[2] = (speed >> 8) & 0xff; /* valueH */ - - DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); if (((retval = ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { - ERROR("couldn't set FT2232 TCK speed"); + LOG_ERROR("couldn't set FT2232 TCK speed"); return retval; } - + + return ERROR_OK; +} + +int ft2232_speed_div(int speed, int *khz) +{ + /* Take a look in the FT2232 manual, + * AN2232C-01 Command Processor for + * MPSSE and MCU Host Bus. Chapter 3.8 */ + + *khz = 6000 / (1+speed); + + return ERROR_OK; +} + +int ft2232_khz(int khz, int *jtag_speed) +{ + if (khz==0) + { + LOG_ERROR("RCLK not supported"); + return ERROR_FAIL; + } + /* Take a look in the FT2232 manual, + * AN2232C-01 Command Processor for + * MPSSE and MCU Host Bus. Chapter 3.8 + * + * We will calc here with a multiplier + * of 10 for better rounding later. */ + + /* Calc speed, (6000 / khz) - 1 */ + /* Use 65000 for better rounding */ + *jtag_speed = (60000 / khz) - 10; + + /* Add 0.9 for rounding */ + *jtag_speed += 9; + + /* Calc real speed */ + *jtag_speed = *jtag_speed / 10; + + /* Check if speed is greater than 0 */ + if (*jtag_speed < 0) + { + *jtag_speed = 0; + } + + /* Check max value */ + if (*jtag_speed > 0xFFFF) + { + *jtag_speed = 0xFFFF; + } + return ERROR_OK; } int ft2232_register_commands(struct command_context_s *cmd_ctx) { register_command(cmd_ctx, NULL, "ft2232_device_desc", ft2232_handle_device_desc_command, - COMMAND_CONFIG, NULL); + COMMAND_CONFIG, "the USB device description of the FTDI FT2232 device"); + register_command(cmd_ctx, NULL, "ft2232_serial", ft2232_handle_serial_command, + COMMAND_CONFIG, "the serial number of the FTDI FT2232 device"); register_command(cmd_ctx, NULL, "ft2232_layout", ft2232_handle_layout_command, - COMMAND_CONFIG, NULL); + COMMAND_CONFIG, "the layout of the FT2232 GPIO signals used to control output-enables and reset signals"); register_command(cmd_ctx, NULL, "ft2232_vid_pid", ft2232_handle_vid_pid_command, - COMMAND_CONFIG, NULL); + COMMAND_CONFIG, "the vendor ID and product ID of the FTDI FT2232 device"); + register_command(cmd_ctx, NULL, "ft2232_latency", ft2232_handle_latency_command, + COMMAND_CONFIG, "set the FT2232 latency timer to a new value"); return ERROR_OK; } -void ft2232_end_state(state) +void ft2232_end_state(enum tap_state state) { if (tap_move_map[state] != -1) end_state = state; else { - ERROR("BUG: %i is not a valid end state", state); + LOG_ERROR("BUG: %i is not a valid end state", state); exit(-1); } } @@ -282,19 +371,19 @@ void ft2232_debug_dump_buffer(void) int i; char line[256]; char *line_p = line; - + for (i = 0; i < ft2232_buffer_size; i++) { line_p += snprintf(line_p, 256 - (line_p - line), "%2.2x ", ft2232_buffer[i]); if (i % 16 == 15) { - DEBUG("%s", line); + LOG_DEBUG("%s", line); line_p = line; } } - + if (line_p != line) - DEBUG("%s", line); + LOG_DEBUG("%s", line); } int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) @@ -306,69 +395,69 @@ int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) int retval; u32 bytes_written; u32 bytes_read; - + #ifdef _DEBUG_USB_IO_ struct timeval start, inter, inter2, end; struct timeval d_inter, d_inter2, d_end; #endif #ifdef _DEBUG_USB_COMMS_ - DEBUG("write buffer (size %i):", ft2232_buffer_size); + LOG_DEBUG("write buffer (size %i):", ft2232_buffer_size); ft2232_debug_dump_buffer(); #endif #ifdef _DEBUG_USB_IO_ - gettimeofday(&start, NULL); + gettimeofday(&start, NULL); #endif if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) { - ERROR("couldn't write MPSSE commands to FT2232"); - exit(-1); + LOG_ERROR("couldn't write MPSSE commands to FT2232"); + return retval; } - + #ifdef _DEBUG_USB_IO_ - gettimeofday(&inter, NULL); + gettimeofday(&inter, NULL); #endif - + if (ft2232_expect_read) { int timeout = 100; ft2232_buffer_size = 0; - + #ifdef _DEBUG_USB_IO_ - gettimeofday(&inter2, NULL); + gettimeofday(&inter2, NULL); #endif - + if ((retval = ft2232_read(ft2232_buffer, ft2232_expect_read, &bytes_read)) != ERROR_OK) { - ERROR("couldn't read from FT2232"); - exit(-1); + LOG_ERROR("couldn't read from FT2232"); + return retval; } - + #ifdef _DEBUG_USB_IO_ - gettimeofday(&end, NULL); + gettimeofday(&end, NULL); timeval_subtract(&d_inter, &inter, &start); timeval_subtract(&d_inter2, &inter2, &start); timeval_subtract(&d_end, &end, &start); - INFO("inter: %i.%i, inter2: %i.%i end: %i.%i", d_inter.tv_sec, d_inter.tv_usec, d_inter2.tv_sec, d_inter2.tv_usec, d_end.tv_sec, d_end.tv_usec); + LOG_INFO("inter: %i.%i, inter2: %i.%i end: %i.%i", d_inter.tv_sec, d_inter.tv_usec, d_inter2.tv_sec, d_inter2.tv_usec, d_end.tv_sec, d_end.tv_usec); #endif - - + + ft2232_buffer_size = bytes_read; - + if (ft2232_expect_read != ft2232_buffer_size) { - ERROR("ft2232_expect_read (%i) != ft2232_buffer_size (%i) (%i retries)", ft2232_expect_read, ft2232_buffer_size, 100 - timeout); - ft2232_debug_dump_buffer(); + LOG_ERROR("ft2232_expect_read (%i) != ft2232_buffer_size (%i) (%i retries)", ft2232_expect_read, ft2232_buffer_size, 100 - timeout); + ft2232_debug_dump_buffer(); exit(-1); } #ifdef _DEBUG_USB_COMMS_ - DEBUG("read buffer (%i retries): %i bytes", 100 - timeout, ft2232_buffer_size); + LOG_DEBUG("read buffer (%i retries): %i bytes", 100 - timeout, ft2232_buffer_size); ft2232_debug_dump_buffer(); #endif } @@ -376,6 +465,11 @@ int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) ft2232_expect_read = 0; ft2232_read_pointer = 0; + /* return ERROR_OK, unless a jtag_read_buffer returns a failed check + * that wasn't handled by a caller-provided error handler + */ + retval = ERROR_OK; + cmd = first; while (cmd != last) { @@ -388,7 +482,8 @@ int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) scan_size = jtag_scan_size(cmd->cmd.scan); buffer = calloc(CEIL(scan_size, 8), 1); ft2232_read_scan(type, buffer, scan_size); - jtag_read_buffer(buffer, cmd->cmd.scan); + if (jtag_read_buffer(buffer, cmd->cmd.scan) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; free(buffer); } break; @@ -397,10 +492,10 @@ int ft2232_send_and_recv(jtag_command_t *first, jtag_command_t *last) } cmd = cmd->next; } - + ft2232_buffer_size = 0; - return ERROR_OK; + return retval; } void ft2232_add_pathmove(pathmove_command_t *cmd) @@ -412,15 +507,17 @@ void ft2232_add_pathmove(pathmove_command_t *cmd) state_count = 0; while (num_states) { - tms_byte = 0x0; int bit_count = 0; - + + int num_states_batch = num_states > 7 ? 7 : num_states; + + tms_byte = 0x0; /* command "Clock Data to TMS/CS Pin (no Read)" */ BUFFER_ADD = 0x4b; /* number of states remaining */ - BUFFER_ADD = (num_states % 7) - 1; - - while (num_states % 7) + BUFFER_ADD = num_states_batch - 1; + + while (num_states_batch--) { if (tap_transitions[cur_state].low == cmd->path[state_count]) buf_set_u32(&tms_byte, bit_count++, 1, 0x0); @@ -428,7 +525,7 @@ void ft2232_add_pathmove(pathmove_command_t *cmd) buf_set_u32(&tms_byte, bit_count++, 1, 0x1); else { - ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_strings[cur_state], tap_state_strings[cmd->path[state_count]]); + LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", jtag_state_name(cur_state), jtag_state_name(cmd->path[state_count])); exit(-1); } @@ -436,10 +533,10 @@ void ft2232_add_pathmove(pathmove_command_t *cmd) state_count++; num_states--; } - + BUFFER_ADD = tms_byte; } - + end_state = cur_state; } @@ -450,7 +547,7 @@ void ft2232_add_scan(int ir_scan, enum scan_type type, u8 *buffer, int scan_size int cur_byte = 0; int last_bit; - if ((!ir_scan && (cur_state != TAP_SD)) || (ir_scan && (cur_state != TAP_SI))) + if (!((!ir_scan && (cur_state == TAP_DRSHIFT)) || (ir_scan && (cur_state == TAP_IRSHIFT)))) { /* command "Clock Data to TMS/CS Pin (no Read)" */ BUFFER_ADD = 0x4b; @@ -459,56 +556,239 @@ void ft2232_add_scan(int ir_scan, enum scan_type type, u8 *buffer, int scan_size /* TMS data bits */ if (ir_scan) { - BUFFER_ADD = TAP_MOVE(cur_state, TAP_SI); - cur_state = TAP_SI; + BUFFER_ADD = TAP_MOVE(cur_state, TAP_IRSHIFT); + cur_state = TAP_IRSHIFT; } else { - BUFFER_ADD = TAP_MOVE(cur_state, TAP_SD); - cur_state = TAP_SD; + BUFFER_ADD = TAP_MOVE(cur_state, TAP_DRSHIFT); + cur_state = TAP_DRSHIFT; } - //DEBUG("added TMS scan (no read)"); + /* LOG_DEBUG("added TMS scan (no read)"); */ } - + /* add command for complete bytes */ - if (num_bytes > 1) + while (num_bytes > 1) { + int thisrun_bytes; if (type == SCAN_IO) { /* Clock Data Bytes In and Out LSB First */ BUFFER_ADD = 0x39; - //DEBUG("added TDI bytes (io %i)", num_bytes); + /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */ } else if (type == SCAN_OUT) { /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */ BUFFER_ADD = 0x19; - //DEBUG("added TDI bytes (o)"); + /* LOG_DEBUG("added TDI bytes (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */ BUFFER_ADD = 0x28; - //DEBUG("added TDI bytes (i %i)", num_bytes); + /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */ + } + thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1); + num_bytes -= thisrun_bytes; + BUFFER_ADD = (thisrun_bytes - 1) & 0xff; + BUFFER_ADD = ((thisrun_bytes - 1) >> 8) & 0xff; + if (type != SCAN_IN) + { + /* add complete bytes */ + while(thisrun_bytes-- > 0) + { + BUFFER_ADD = buffer[cur_byte]; + cur_byte++; + bits_left -= 8; + } + } + else /* (type == SCAN_IN) */ + { + bits_left -= 8 * (thisrun_bytes); } - BUFFER_ADD = (num_bytes-2) & 0xff; - BUFFER_ADD = ((num_bytes-2) >> 8) & 0xff; } + + /* the most signifcant bit is scanned during TAP movement */ if (type != SCAN_IN) + last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1; + else + last_bit = 0; + + /* process remaining bits but the last one */ + if (bits_left > 1) { - /* add complete bytes */ - while(num_bytes-- > 1) + if (type == SCAN_IO) + { + /* Clock Data Bits In and Out LSB First */ + BUFFER_ADD = 0x3b; + /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ + } + else if (type == SCAN_OUT) + { + /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ + BUFFER_ADD = 0x1b; + /* LOG_DEBUG("added TDI bits (o)"); */ + } + else if (type == SCAN_IN) { + /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ + BUFFER_ADD = 0x2a; + /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ + } + BUFFER_ADD = bits_left - 2; + if (type != SCAN_IN) BUFFER_ADD = buffer[cur_byte]; - cur_byte++; - bits_left -= 8; + } + + if ((ir_scan && (end_state == TAP_IRSHIFT)) || + (!ir_scan && (end_state == TAP_DRSHIFT))) + { + if (type == SCAN_IO) + { + /* Clock Data Bits In and Out LSB First */ + BUFFER_ADD = 0x3b; + /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ + } + else if (type == SCAN_OUT) + { + /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ + BUFFER_ADD = 0x1b; + /* LOG_DEBUG("added TDI bits (o)"); */ + } + else if (type == SCAN_IN) + { + /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ + BUFFER_ADD = 0x2a; + /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ + } + BUFFER_ADD = 0x0; + BUFFER_ADD = last_bit; + } + else + { + /* move from Shift-IR/DR to end state */ + if (type != SCAN_OUT) + { + /* Clock Data to TMS/CS Pin with Read */ + BUFFER_ADD = 0x6b; + /* LOG_DEBUG("added TMS scan (read)"); */ } + else + { + /* Clock Data to TMS/CS Pin (no Read) */ + BUFFER_ADD = 0x4b; + /* LOG_DEBUG("added TMS scan (no read)"); */ + } + BUFFER_ADD = 0x6; + BUFFER_ADD = TAP_MOVE(cur_state, end_state) | (last_bit << 7); + cur_state = end_state; } - if (type == SCAN_IN) +} + +int ft2232_large_scan(scan_command_t *cmd, enum scan_type type, u8 *buffer, int scan_size) +{ + int num_bytes = (scan_size + 7) / 8; + int bits_left = scan_size; + int cur_byte = 0; + int last_bit; + u8 *receive_buffer = malloc(CEIL(scan_size, 8)); + u8 *receive_pointer = receive_buffer; + u32 bytes_written; + u32 bytes_read; + int retval; + int thisrun_read = 0; + + if (cmd->ir_scan) + { + LOG_ERROR("BUG: large IR scans are not supported"); + exit(-1); + } + + if (cur_state != TAP_DRSHIFT) + { + /* command "Clock Data to TMS/CS Pin (no Read)" */ + BUFFER_ADD = 0x4b; + /* scan 7 bit */ + BUFFER_ADD = 0x6; + /* TMS data bits */ + BUFFER_ADD = TAP_MOVE(cur_state, TAP_DRSHIFT); + cur_state = TAP_DRSHIFT; + } + + if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) { - bits_left -= 8 * (num_bytes - 1); + LOG_ERROR("couldn't write MPSSE commands to FT2232"); + exit(-1); + } + LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i", ft2232_buffer_size, bytes_written); + ft2232_buffer_size = 0; + + /* add command for complete bytes */ + while (num_bytes > 1) + { + int thisrun_bytes; + + if (type == SCAN_IO) + { + /* Clock Data Bytes In and Out LSB First */ + BUFFER_ADD = 0x39; + /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */ + } + else if (type == SCAN_OUT) + { + /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */ + BUFFER_ADD = 0x19; + /* LOG_DEBUG("added TDI bytes (o)"); */ + } + else if (type == SCAN_IN) + { + /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */ + BUFFER_ADD = 0x28; + /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */ + } + thisrun_bytes = (num_bytes > 65537) ? 65536 : (num_bytes - 1); + thisrun_read = thisrun_bytes; + num_bytes -= thisrun_bytes; + BUFFER_ADD = (thisrun_bytes - 1) & 0xff; + BUFFER_ADD = ((thisrun_bytes - 1) >> 8) & 0xff; + if (type != SCAN_IN) + { + /* add complete bytes */ + while(thisrun_bytes-- > 0) + { + BUFFER_ADD = buffer[cur_byte]; + cur_byte++; + bits_left -= 8; + } + } + else /* (type == SCAN_IN) */ + { + bits_left -= 8 * (thisrun_bytes); + } + + if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) + { + LOG_ERROR("couldn't write MPSSE commands to FT2232"); + exit(-1); + } + LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i", ft2232_buffer_size, bytes_written); + ft2232_buffer_size = 0; + + if (type != SCAN_OUT) + { + if ((retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read)) != ERROR_OK) + { + LOG_ERROR("couldn't read from FT2232"); + exit(-1); + } + LOG_DEBUG("thisrun_read: %i, bytes_read: %i", thisrun_read, bytes_read); + receive_pointer += bytes_read; + } } + thisrun_read = 0; + /* the most signifcant bit is scanned during TAP movement */ if (type != SCAN_IN) last_bit = (buffer[cur_byte] >> (bits_left - 1)) & 0x1; @@ -522,62 +802,115 @@ void ft2232_add_scan(int ir_scan, enum scan_type type, u8 *buffer, int scan_size { /* Clock Data Bits In and Out LSB First */ BUFFER_ADD = 0x3b; - //DEBUG("added TDI bits (io) %i", bits_left - 1); + /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ } else if (type == SCAN_OUT) { /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ BUFFER_ADD = 0x1b; - //DEBUG("added TDI bits (o)"); + /* LOG_DEBUG("added TDI bits (o)"); */ } else if (type == SCAN_IN) { /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ BUFFER_ADD = 0x2a; - //DEBUG("added TDI bits (i %i)", bits_left - 1); + /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ } BUFFER_ADD = bits_left - 2; if (type != SCAN_IN) BUFFER_ADD = buffer[cur_byte]; + + if (type != SCAN_OUT) + thisrun_read += 2; } - /* move from Shift-IR/DR to end state */ - if (type != SCAN_OUT) + if (end_state == TAP_DRSHIFT) { - /* Clock Data to TMS/CS Pin with Read */ - BUFFER_ADD = 0x6b; - //DEBUG("added TMS scan (read)"); + if (type == SCAN_IO) + { + /* Clock Data Bits In and Out LSB First */ + BUFFER_ADD = 0x3b; + /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */ + } + else if (type == SCAN_OUT) + { + /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */ + BUFFER_ADD = 0x1b; + /* LOG_DEBUG("added TDI bits (o)"); */ + } + else if (type == SCAN_IN) + { + /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */ + BUFFER_ADD = 0x2a; + /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */ + } + BUFFER_ADD = 0x0; + BUFFER_ADD = last_bit; } else { - /* Clock Data to TMS/CS Pin (no Read) */ - BUFFER_ADD = 0x4b; - //DEBUG("added TMS scan (no read)"); + /* move from Shift-IR/DR to end state */ + if (type != SCAN_OUT) + { + /* Clock Data to TMS/CS Pin with Read */ + BUFFER_ADD = 0x6b; + /* LOG_DEBUG("added TMS scan (read)"); */ + } + else + { + /* Clock Data to TMS/CS Pin (no Read) */ + BUFFER_ADD = 0x4b; + /* LOG_DEBUG("added TMS scan (no read)"); */ + } + BUFFER_ADD = 0x6; + BUFFER_ADD = TAP_MOVE(cur_state, end_state) | (last_bit << 7); + cur_state = end_state; + } + + if (type != SCAN_OUT) + thisrun_read += 1; + + if ((retval = ft2232_write(ft2232_buffer, ft2232_buffer_size, &bytes_written)) != ERROR_OK) + { + LOG_ERROR("couldn't write MPSSE commands to FT2232"); + exit(-1); + } + LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i", ft2232_buffer_size, bytes_written); + ft2232_buffer_size = 0; + + if (type != SCAN_OUT) + { + if ((retval = ft2232_read(receive_pointer, thisrun_read, &bytes_read)) != ERROR_OK) + { + LOG_ERROR("couldn't read from FT2232"); + exit(-1); + } + LOG_DEBUG("thisrun_read: %i, bytes_read: %i", thisrun_read, bytes_read); + receive_pointer += bytes_read; } - BUFFER_ADD = 0x6; - BUFFER_ADD = TAP_MOVE(cur_state, end_state) | (last_bit << 7); - cur_state = end_state; + return ERROR_OK; } int ft2232_predict_scan_out(int scan_size, enum scan_type type) { int predicted_size = 3; - - if (cur_state != TAP_SD) + int num_bytes = (scan_size - 1) / 8; + + if (cur_state != TAP_DRSHIFT) predicted_size += 3; - + if (type == SCAN_IN) /* only from device to host */ { /* complete bytes */ - predicted_size += (CEIL(scan_size, 8) > 1) ? 3 : 0; + predicted_size += (CEIL(num_bytes, 65536)) * 3; /* remaining bits - 1 (up to 7) */ predicted_size += ((scan_size - 1) % 8) ? 2 : 0; } else /* host to device, or bidirectional */ { /* complete bytes */ - predicted_size += (CEIL(scan_size, 8) > 1) ? (CEIL(scan_size, 8) + 3 - 1) : 0; + predicted_size += num_bytes + (CEIL(num_bytes, 65536)) * 3; /* remaining bits -1 (up to 7) */ predicted_size += ((scan_size - 1) % 8) ? 3 : 0; } @@ -588,7 +921,7 @@ int ft2232_predict_scan_out(int scan_size, enum scan_type type) int ft2232_predict_scan_in(int scan_size, enum scan_type type) { int predicted_size = 0; - + if (type != SCAN_OUT) { /* complete bytes */ @@ -598,8 +931,8 @@ int ft2232_predict_scan_in(int scan_size, enum scan_type type) /* last bit (from TMS scan) */ predicted_size += 1; } - - //DEBUG("scan_size: %i, predicted_size: %i", scan_size, predicted_size); + + /* LOG_DEBUG("scan_size: %i, predicted_size: %i", scan_size, predicted_size); */ return predicted_size; } @@ -608,7 +941,6 @@ void usbjtag_reset(int trst, int srst) { if (trst == 1) { - cur_state = TAP_TLR; if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) low_direction |= nTRSTnOE; /* switch to output pin (output is low) */ else @@ -636,7 +968,7 @@ void usbjtag_reset(int trst, int srst) else low_direction &= ~nSRSTnOE; /* switch to input pin (high-Z) */ } - + /* command "set data bits low byte" */ BUFFER_ADD = 0x80; BUFFER_ADD = low_output; @@ -648,7 +980,6 @@ void jtagkey_reset(int trst, int srst) { if (trst == 1) { - cur_state = TAP_TLR; if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) high_output &= ~nTRSTnOE; else @@ -676,19 +1007,18 @@ void jtagkey_reset(int trst, int srst) else high_output |= nSRSTnOE; } - + /* command "set data bits high byte" */ BUFFER_ADD = 0x82; BUFFER_ADD = high_output; BUFFER_ADD = high_direction; - DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); + LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); } void olimex_jtag_reset(int trst, int srst) { if (trst == 1) { - cur_state = TAP_TLR; if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) high_output &= ~nTRSTnOE; else @@ -702,36 +1032,176 @@ void olimex_jtag_reset(int trst, int srst) high_output |= nTRST; } - if (srst == 1) - { - high_output |= nSRST; - } - else if (srst == 0) - { - high_output &= ~nSRST; - } - - /* command "set data bits high byte" */ - BUFFER_ADD = 0x82; - BUFFER_ADD = high_output; - BUFFER_ADD = high_direction; - DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); + if (srst == 1) + { + high_output |= nSRST; + } + else if (srst == 0) + { + high_output &= ~nSRST; + } + + /* command "set data bits high byte" */ + BUFFER_ADD = 0x82; + BUFFER_ADD = high_output; + BUFFER_ADD = high_direction; + LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); } -int ft2232_execute_queue() +void axm0432_jtag_reset(int trst, int srst) { - jtag_command_t *cmd = jtag_command_queue; /* currently processed command */ - jtag_command_t *first_unsent = cmd; /* next command that has to be sent */ - u8 *buffer; + if (trst == 1) + { + cur_state = TAP_RESET; + high_output &= ~nTRST; + } + else if (trst == 0) + { + high_output |= nTRST; + } + + if (srst == 1) + { + high_output &= ~nSRST; + } + else if (srst == 0) + { + high_output |= nSRST; + } + + /* command "set data bits low byte" */ + BUFFER_ADD = 0x82; + BUFFER_ADD = high_output; + BUFFER_ADD = high_direction; + LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); +} + +void flyswatter_reset(int trst, int srst) +{ + if (trst == 1) + { + low_output &= ~nTRST; + } + else if (trst == 0) + { + low_output |= nTRST; + } + + if (srst == 1) + { + low_output |= nSRST; + } + else if (srst == 0) + { + low_output &= ~nSRST; + } + + /* command "set data bits low byte" */ + BUFFER_ADD = 0x80; + BUFFER_ADD = low_output; + BUFFER_ADD = low_direction; + LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst, srst, low_output, low_direction); +} + +void turtle_reset(int trst, int srst) +{ + trst = trst; + + if (srst == 1) + { + low_output |= nSRST; + } + else if (srst == 0) + { + low_output &= ~nSRST; + } + + /* command "set data bits low byte" */ + BUFFER_ADD = 0x80; + BUFFER_ADD = low_output; + BUFFER_ADD = low_direction; + LOG_DEBUG("srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", srst, low_output, low_direction); +} + +void comstick_reset(int trst, int srst) +{ + if (trst == 1) + { + high_output &= ~nTRST; + } + else if (trst == 0) + { + high_output |= nTRST; + } + + if (srst == 1) + { + high_output &= ~nSRST; + } + else if (srst == 0) + { + high_output |= nSRST; + } + + /* command "set data bits high byte" */ + BUFFER_ADD = 0x82; + BUFFER_ADD = high_output; + BUFFER_ADD = high_direction; + LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); +} + +void stm32stick_reset(int trst, int srst) +{ + if (trst == 1) + { + high_output &= ~nTRST; + } + else if (trst == 0) + { + high_output |= nTRST; + } + + if (srst == 1) + { + low_output &= ~nSRST; + } + else if (srst == 0) + { + low_output |= nSRST; + } + + /* command "set data bits low byte" */ + BUFFER_ADD = 0x80; + BUFFER_ADD = low_output; + BUFFER_ADD = low_direction; + + /* command "set data bits high byte" */ + BUFFER_ADD = 0x82; + BUFFER_ADD = high_output; + BUFFER_ADD = high_direction; + LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst, srst, high_output, high_direction); +} + +int ft2232_execute_queue() +{ + jtag_command_t *cmd = jtag_command_queue; /* currently processed command */ + jtag_command_t *first_unsent = cmd; /* next command that has to be sent */ + u8 *buffer; int scan_size; /* size of IR or DR scan */ enum scan_type type; int i; int predicted_size = 0; int require_send = 0; + int retval; + + /* return ERROR_OK, unless ft2232_send_and_recv reports a failed check + * that wasn't handled by a caller-provided error handler + */ + retval = ERROR_OK; ft2232_buffer_size = 0; ft2232_expect_read = 0; - + /* blink, if the current layout has that feature */ if (layout->blink) layout->blink(); @@ -749,43 +1219,49 @@ int ft2232_execute_queue() predicted_size = 3; if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) { - ft2232_send_and_recv(first_unsent, cmd); + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; require_send = 0; first_unsent = cmd; } + if ((cmd->cmd.reset->trst == 1) || (cmd->cmd.reset->srst && (jtag_reset_config & RESET_SRST_PULLS_TRST))) + { + cur_state = TAP_RESET; + } layout->reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst); require_send = 1; - -#ifdef _DEBUG_JTAG_IO_ - DEBUG("trst: %i, srst: %i", cmd->cmd.reset->trst, cmd->cmd.reset->srst); + +#ifdef _DEBUG_JTAG_IO_ + LOG_DEBUG("trst: %i, srst: %i", cmd->cmd.reset->trst, cmd->cmd.reset->srst); #endif break; case JTAG_RUNTEST: /* only send the maximum buffer size that FT2232C can handle */ predicted_size = 0; - if (cur_state != TAP_RTI) + if (cur_state != TAP_IDLE) predicted_size += 3; predicted_size += 3 * CEIL(cmd->cmd.runtest->num_cycles, 7); - if ((cmd->cmd.runtest->end_state != -1) && (cmd->cmd.runtest->end_state != TAP_RTI)) + if ((cmd->cmd.runtest->end_state != -1) && (cmd->cmd.runtest->end_state != TAP_IDLE)) predicted_size += 3; - if ((cmd->cmd.runtest->end_state == -1) && (end_state != TAP_RTI)) + if ((cmd->cmd.runtest->end_state == -1) && (end_state != TAP_IDLE)) predicted_size += 3; if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) { - ft2232_send_and_recv(first_unsent, cmd); + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; require_send = 0; first_unsent = cmd; } - if (cur_state != TAP_RTI) + if (cur_state != TAP_IDLE) { /* command "Clock Data to TMS/CS Pin (no Read)" */ BUFFER_ADD = 0x4b; /* scan 7 bit */ BUFFER_ADD = 0x6; /* TMS data bits */ - BUFFER_ADD = TAP_MOVE(cur_state, TAP_RTI); - cur_state = TAP_RTI; + BUFFER_ADD = TAP_MOVE(cur_state, TAP_IDLE); + cur_state = TAP_IDLE; require_send = 1; } i = cmd->cmd.runtest->num_cycles; @@ -797,9 +1273,9 @@ int ft2232_execute_queue() BUFFER_ADD = (i > 7) ? 6 : (i - 1); /* TMS data bits */ BUFFER_ADD = 0x0; - cur_state = TAP_RTI; + cur_state = TAP_IDLE; i -= (i > 7) ? 7 : i; - //DEBUG("added TMS scan (no read)"); + /* LOG_DEBUG("added TMS scan (no read)"); */ } if (cmd->cmd.runtest->end_state != -1) ft2232_end_state(cmd->cmd.runtest->end_state); @@ -812,11 +1288,11 @@ int ft2232_execute_queue() /* TMS data bits */ BUFFER_ADD = TAP_MOVE(cur_state, end_state); cur_state = end_state; - //DEBUG("added TMS scan (no read)"); + /* LOG_DEBUG("added TMS scan (no read)"); */ } require_send = 1; -#ifdef _DEBUG_JTAG_IO_ - DEBUG("runtest: %i, end in %i", cmd->cmd.runtest->num_cycles, end_state); +#ifdef _DEBUG_JTAG_IO_ + LOG_DEBUG("runtest: %i, end in %i", cmd->cmd.runtest->num_cycles, end_state); #endif break; case JTAG_STATEMOVE: @@ -824,7 +1300,8 @@ int ft2232_execute_queue() predicted_size = 3; if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) { - ft2232_send_and_recv(first_unsent, cmd); + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; require_send = 0; first_unsent = cmd; } @@ -836,11 +1313,11 @@ int ft2232_execute_queue() BUFFER_ADD = 0x6; /* TMS data bits */ BUFFER_ADD = TAP_MOVE(cur_state, end_state); - //DEBUG("added TMS scan (no read)"); + /* LOG_DEBUG("added TMS scan (no read)"); */ cur_state = end_state; require_send = 1; -#ifdef _DEBUG_JTAG_IO_ - DEBUG("statemove: %i", end_state); +#ifdef _DEBUG_JTAG_IO_ + LOG_DEBUG("statemove: %i", end_state); #endif break; case JTAG_PATHMOVE: @@ -848,122 +1325,134 @@ int ft2232_execute_queue() predicted_size = 3 * CEIL(cmd->cmd.pathmove->num_states, 7); if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) { - ft2232_send_and_recv(first_unsent, cmd); + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; require_send = 0; first_unsent = cmd; } ft2232_add_pathmove(cmd->cmd.pathmove); require_send = 1; -#ifdef _DEBUG_JTAG_IO_ - DEBUG("pathmove: %i states, end in %i", cmd->cmd.pathmove->num_states, cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]); +#ifdef _DEBUG_JTAG_IO_ + LOG_DEBUG("pathmove: %i states, end in %i", cmd->cmd.pathmove->num_states, cmd->cmd.pathmove->path[cmd->cmd.pathmove->num_states - 1]); #endif break; case JTAG_SCAN: scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer); type = jtag_scan_type(cmd->cmd.scan); predicted_size = ft2232_predict_scan_out(scan_size, type); - if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) + if ((predicted_size + 1) > FT2232_BUFFER_SIZE) { - DEBUG("ftd2xx buffer size reached, sending queued commands (first_unsent: %x, cmd: %x)", first_unsent, cmd); - ft2232_send_and_recv(first_unsent, cmd); + LOG_DEBUG("oversized ft2232 scan (predicted_size > FT2232_BUFFER_SIZE)"); + /* unsent commands before this */ + if (first_unsent != cmd) + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; + + /* current command */ + if (cmd->cmd.scan->end_state != -1) + ft2232_end_state(cmd->cmd.scan->end_state); + ft2232_large_scan(cmd->cmd.scan, type, buffer, scan_size); + require_send = 0; + first_unsent = cmd->next; + if (buffer) + free(buffer); + break; + } + else if (ft2232_buffer_size + predicted_size + 1 > FT2232_BUFFER_SIZE) + { + LOG_DEBUG("ft2232 buffer size reached, sending queued commands (first_unsent: %p, cmd: %p)", first_unsent, cmd); + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; require_send = 0; first_unsent = cmd; } ft2232_expect_read += ft2232_predict_scan_in(scan_size, type); - //DEBUG("new read size: %i", ft2232_expect_read); + /* LOG_DEBUG("new read size: %i", ft2232_expect_read); */ if (cmd->cmd.scan->end_state != -1) ft2232_end_state(cmd->cmd.scan->end_state); ft2232_add_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size); require_send = 1; if (buffer) free(buffer); -#ifdef _DEBUG_JTAG_IO_ - DEBUG("%s scan, %i bit, end in %i", (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size, end_state); +#ifdef _DEBUG_JTAG_IO_ + LOG_DEBUG("%s scan, %i bit, end in %i", (cmd->cmd.scan->ir_scan) ? "IR" : "DR", scan_size, end_state); #endif break; case JTAG_SLEEP: - ft2232_send_and_recv(first_unsent, cmd); + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; first_unsent = cmd->next; jtag_sleep(cmd->cmd.sleep->us); -#ifdef _DEBUG_JTAG_IO_ - DEBUG("sleep %i usec", cmd->cmd.sleep->us); +#ifdef _DEBUG_JTAG_IO_ + LOG_DEBUG("sleep %i usec", cmd->cmd.sleep->us); #endif break; default: - ERROR("BUG: unknown JTAG command type encountered"); + LOG_ERROR("BUG: unknown JTAG command type encountered"); exit(-1); } cmd = cmd->next; } if (require_send > 0) - ft2232_send_and_recv(first_unsent, cmd); + if (ft2232_send_and_recv(first_unsent, cmd) != ERROR_OK) + retval = ERROR_JTAG_QUEUE_FAILED; - return ERROR_OK; + return retval; } -int ft2232_init(void) -{ - u8 latency_timer; - u8 buf[1]; - int retval; - u32 bytes_written; - #if BUILD_FT2232_FTD2XX == 1 +static int ft2232_init_ftd2xx(u16 vid, u16 pid, int more, int *try_more) +{ FT_STATUS status; -#endif + DWORD openex_flags = 0; + char *openex_string = NULL; + u8 latency_timer; - ft2232_layout_t *cur_layout = ft2232_layouts; - - if ((ft2232_layout == NULL) || (ft2232_layout[0] == 0)) + LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)",ft2232_layout, vid, pid); + +#if IS_WIN32 == 0 + /* Add non-standard Vid/Pid to the linux driver */ + if ((status = FT_SetVIDPID(vid, pid)) != FT_OK) { - ft2232_layout = "usbjtag"; - WARNING("No ft2232 layout specified, using default 'usbjtag'"); + LOG_WARNING("couldn't add %4.4x:%4.4x", vid, pid); } - - while (cur_layout->name) +#endif + + if (ft2232_device_desc && ft2232_serial) { - if (strcmp(cur_layout->name, ft2232_layout) == 0) - { - layout = cur_layout; - break; - } - cur_layout++; + LOG_WARNING("can't open by device description and serial number, giving precedence to serial"); + ft2232_device_desc = NULL; } - if (!layout) + if (ft2232_device_desc) { - ERROR("No matching layout found for %s", ft2232_layout); - return ERROR_JTAG_INIT_FAILED; + openex_string = ft2232_device_desc; + openex_flags = FT_OPEN_BY_DESCRIPTION; } - -#if BUILD_FT2232_FTD2XX == 1 - DEBUG("'ft2232' interface using FTD2XX with '%s' layout", ft2232_layout); -#elif BUILD_FT2232_LIBFTDI == 1 - DEBUG("'ft2232' interface using libftdi with '%s' layout", ft2232_layout); -#endif - -#if BUILD_FT2232_FTD2XX == 1 - /* Open by device description */ - if (ft2232_device_desc == NULL) + else if (ft2232_serial) { - WARNING("no ftd2xx device description specified, using default 'Dual RS232'"); - ft2232_device_desc = "Dual RS232"; + openex_string = ft2232_serial; + openex_flags = FT_OPEN_BY_SERIAL_NUMBER; } - -#if IS_WIN32 == 0 - /* Add non-standard Vid/Pid to the linux driver */ - if ((status = FT_SetVIDPID(ft2232_vid, ft2232_pid)) != FT_OK) + else { - WARNING("couldn't add %4.4x:%4.4x", ft2232_vid, ft2232_pid); + LOG_ERROR("neither device description nor serial number specified"); + LOG_ERROR("please add \"ft2232_device_desc \" or \"ft2232_serial \" to your .cfg file"); + + return ERROR_JTAG_INIT_FAILED; } -#endif - if ((status = FT_OpenEx(ft2232_device_desc, FT_OPEN_BY_DESCRIPTION, &ftdih)) != FT_OK) + if ((status = FT_OpenEx(openex_string, openex_flags, &ftdih)) != FT_OK) { DWORD num_devices; - - ERROR("unable to open ftdi device: %i", status); + + if (more) { + LOG_WARNING("unable to open ftdi device (trying more): %lu", status); + *try_more = 1; + return ERROR_JTAG_INIT_FAILED; + } + LOG_ERROR("unable to open ftdi device: %lu", status); status = FT_ListDevices(&num_devices, NULL, FT_LIST_NUMBER_ONLY); if (status == FT_OK) { @@ -974,86 +1463,194 @@ int ft2232_init(void) desc_array[i] = malloc(64); desc_array[num_devices] = NULL; - status = FT_ListDevices(desc_array, &num_devices, FT_LIST_ALL | FT_OPEN_BY_DESCRIPTION); + status = FT_ListDevices(desc_array, &num_devices, FT_LIST_ALL | openex_flags); if (status == FT_OK) { - ERROR("ListDevices: %d\n", num_devices); + LOG_ERROR("ListDevices: %lu\n", num_devices); for (i = 0; i < num_devices; i++) - ERROR("%i: %s", i, desc_array[i]); + LOG_ERROR("%i: %s", i, desc_array[i]); } - + for (i = 0; i < num_devices; i++) free(desc_array[i]); free(desc_array); } else { - printf("ListDevices: NONE\n"); + LOG_ERROR("ListDevices: NONE\n"); } return ERROR_JTAG_INIT_FAILED; } - if ((status = FT_SetLatencyTimer(ftdih, 2)) != FT_OK) + if ((status = FT_SetLatencyTimer(ftdih, ft2232_latency)) != FT_OK) { - ERROR("unable to set latency timer: %i", status); + LOG_ERROR("unable to set latency timer: %lu", status); return ERROR_JTAG_INIT_FAILED; } - + if ((status = FT_GetLatencyTimer(ftdih, &latency_timer)) != FT_OK) { - ERROR("unable to get latency timer: %i", status); + LOG_ERROR("unable to get latency timer: %lu", status); return ERROR_JTAG_INIT_FAILED; } else { - DEBUG("current latency timer: %i", latency_timer); + LOG_DEBUG("current latency timer: %i", latency_timer); + } + + if ((status = FT_SetTimeouts(ftdih, 5000, 5000)) != FT_OK) + { + LOG_ERROR("unable to set timeouts: %lu", status); + return ERROR_JTAG_INIT_FAILED; } if ((status = FT_SetBitMode(ftdih, 0x0b, 2)) != FT_OK) { - ERROR("unable to enable bit i/o mode: %i", status); + LOG_ERROR("unable to enable bit i/o mode: %lu", status); return ERROR_JTAG_INIT_FAILED; } -#elif BUILD_FT2232_LIBFTDI == 1 + + return ERROR_OK; +} + +static int ft2232_purge_ftd2xx(void) +{ + FT_STATUS status; + + if ((status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX)) != FT_OK) + { + LOG_ERROR("error purging ftd2xx device: %lu", status); + return ERROR_JTAG_INIT_FAILED; + } + + return ERROR_OK; +} +#endif /* BUILD_FT2232_FTD2XX == 1 */ + +#if BUILD_FT2232_LIBFTDI == 1 +static int ft2232_init_libftdi(u16 vid, u16 pid, int more, int *try_more) +{ + u8 latency_timer; + + LOG_DEBUG("'ft2232' interface using libftdi with '%s' layout (%4.4x:%4.4x)", + ft2232_layout, vid, pid); + if (ftdi_init(&ftdic) < 0) return ERROR_JTAG_INIT_FAILED; /* context, vendor id, product id */ - if (ftdi_usb_open(&ftdic, ft2232_vid, ft2232_pid) < 0) + if (ftdi_usb_open_desc(&ftdic, vid, pid, ft2232_device_desc, + ft2232_serial) < 0) { + if (more) + LOG_WARNING("unable to open ftdi device (trying more): %s", + ftdic.error_str); + else + LOG_ERROR("unable to open ftdi device: %s", ftdic.error_str); + *try_more = 1; + return ERROR_JTAG_INIT_FAILED; + } + + if (ftdi_set_interface(&ftdic, INTERFACE_A) < 0) { - ERROR("unable to open ftdi device: %s", ftdic.error_str); + LOG_ERROR("unable to select FT2232 channel A: %s", ftdic.error_str); return ERROR_JTAG_INIT_FAILED; } if (ftdi_usb_reset(&ftdic) < 0) { - ERROR("unable to reset ftdi device"); + LOG_ERROR("unable to reset ftdi device"); return ERROR_JTAG_INIT_FAILED; } - if (ftdi_set_latency_timer(&ftdic, 2) < 0) + if (ftdi_set_latency_timer(&ftdic, ft2232_latency) < 0) { - ERROR("unable to set latency timer"); + LOG_ERROR("unable to set latency timer"); return ERROR_JTAG_INIT_FAILED; } - + if (ftdi_get_latency_timer(&ftdic, &latency_timer) < 0) { - ERROR("unable to get latency timer"); + LOG_ERROR("unable to get latency timer"); return ERROR_JTAG_INIT_FAILED; } else { - DEBUG("current latency timer: %i", latency_timer); + LOG_DEBUG("current latency timer: %i", latency_timer); + } + + ftdi_set_bitmode(&ftdic, 0x0b, 2); /* ctx, JTAG I/O mask */ + + return ERROR_OK; +} + +static int ft2232_purge_libftdi(void) +{ + if (ftdi_usb_purge_buffers(&ftdic) < 0) + { + LOG_ERROR("ftdi_purge_buffers: %s", ftdic.error_str); + return ERROR_JTAG_INIT_FAILED; } - ftdic.bitbang_mode = 0; /* Reset controller */ - ftdi_enable_bitbang(&ftdic, 0x0b); /* ctx, JTAG I/O mask */ + return ERROR_OK; +} +#endif /* BUILD_FT2232_LIBFTDI == 1 */ - ftdic.bitbang_mode = 2; /* MPSSE mode */ - ftdi_enable_bitbang(&ftdic, 0x0b); /* ctx, JTAG I/O mask */ -#endif +int ft2232_init(void) +{ + u8 buf[1]; + int retval; + u32 bytes_written; + ft2232_layout_t *cur_layout = ft2232_layouts; + int i; + + if ((ft2232_layout == NULL) || (ft2232_layout[0] == 0)) + { + ft2232_layout = "usbjtag"; + LOG_WARNING("No ft2232 layout specified, using default 'usbjtag'"); + } + + while (cur_layout->name) + { + if (strcmp(cur_layout->name, ft2232_layout) == 0) + { + layout = cur_layout; + break; + } + cur_layout++; + } + + if (!layout) + { + LOG_ERROR("No matching layout found for %s", ft2232_layout); + return ERROR_JTAG_INIT_FAILED; + } + + for (i = 0; 1; i++) { + /* + * "more indicates that there are more IDs to try, so we should + * not print an error for an ID mismatch (but for anything + * else, we should). + * + * try_more indicates that the error code returned indicates an + * ID mismatch (and nothing else) and that we should proceeed + * with the next ID pair. + */ + int more = ft2232_vid[i+1] || ft2232_pid[i+1]; + int try_more = 0; + +#if BUILD_FT2232_FTD2XX == 1 + retval = ft2232_init_ftd2xx(ft2232_vid[i], ft2232_pid[i], + more, &try_more); +#elif BUILD_FT2232_LIBFTDI == 1 + retval = ft2232_init_libftdi(ft2232_vid[i], ft2232_pid[i], + more, &try_more); +#endif + if (retval >= 0) + break; + if (!more || !try_more) + return retval; + } ft2232_buffer_size = 0; ft2232_buffer = malloc(FT2232_BUFFER_SIZE); @@ -1066,23 +1663,15 @@ int ft2232_init(void) buf[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */ if (((retval = ft2232_write(buf, 1, &bytes_written)) != ERROR_OK) || (bytes_written != 1)) { - ERROR("couldn't write to FT2232 to disable loopback"); + LOG_ERROR("couldn't write to FT2232 to disable loopback"); return ERROR_JTAG_INIT_FAILED; } #if BUILD_FT2232_FTD2XX == 1 - if ((status = FT_Purge(ftdih, FT_PURGE_RX | FT_PURGE_TX)) != FT_OK) - { - ERROR("error purging ftd2xx device: %i", status); - return ERROR_JTAG_INIT_FAILED; - } + return ft2232_purge_ftd2xx(); #elif BUILD_FT2232_LIBFTDI == 1 - if (ftdi_usb_purge_buffers(&ftdic) < 0) - { - ERROR("ftdi_purge_buffers: %s", ftdic.error_str); - return ERROR_JTAG_INIT_FAILED; - } -#endif + return ft2232_purge_libftdi(); +#endif return ERROR_OK; } @@ -1091,10 +1680,10 @@ int usbjtag_init(void) { u8 buf[3]; u32 bytes_written; - + low_output = 0x08; low_direction = 0x0b; - + if (strcmp(ft2232_layout, "usbjtag") == 0) { nTRST = 0x10; @@ -1109,12 +1698,21 @@ int usbjtag_init(void) nSRST = 0x20; nSRSTnOE = 0x20; } + else if (strcmp(ft2232_layout, "evb_lm3s811") == 0) + { + nTRST = 0x0; + nTRSTnOE = 0x00; + nSRST = 0x20; + nSRSTnOE = 0x20; + low_output = 0x88; + low_direction = 0x8b; + } else { - ERROR("BUG: usbjtag_init called for unknown layout '%s'", ft2232_layout); - return ERROR_JTAG_INIT_FAILED; + LOG_ERROR("BUG: usbjtag_init called for unknown layout '%s'", ft2232_layout); + return ERROR_JTAG_INIT_FAILED; } - + if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) { low_direction &= ~nTRSTnOE; /* nTRST input */ @@ -1125,7 +1723,7 @@ int usbjtag_init(void) low_direction |= nTRSTnOE; /* nTRST output */ low_output |= nTRST; /* nTRST = 1 */ } - + if (jtag_reset_config & RESET_SRST_PUSH_PULL) { low_direction |= nSRSTnOE; /* nSRST output */ @@ -1136,16 +1734,85 @@ int usbjtag_init(void) low_direction &= ~nSRSTnOE; /* nSRST input */ low_output &= ~nSRST; /* nSRST = 0 */ } - + /* initialize low byte for jtag */ buf[0] = 0x80; /* command "set data bits low byte" */ buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, xRST high) */ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in */ - DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { - ERROR("couldn't initialize FT2232 with 'USBJTAG' layout"); + LOG_ERROR("couldn't initialize FT2232 with 'USBJTAG' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + return ERROR_OK; +} + +int axm0432_jtag_init(void) +{ + u8 buf[3]; + u32 bytes_written; + + low_output = 0x08; + low_direction = 0x2b; + + /* initialize low byte for jtag */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + if (strcmp(layout->name, "axm0432_jtag") == 0) + { + nTRST = 0x08; + nTRSTnOE = 0x0; /* No output enable for TRST*/ + nSRST = 0x04; + nSRSTnOE = 0x0; /* No output enable for SRST*/ + } + else + { + LOG_ERROR("BUG: axm0432_jtag_init called for non axm0432 layout"); + exit(-1); + } + + high_output = 0x0; + high_direction = 0x0c; + + if (jtag_reset_config & RESET_TRST_OPEN_DRAIN) + { + LOG_ERROR("can't set nTRSTOE to push-pull on the Dicarlo jtag"); + } + else + { + high_output |= nTRST; + } + + if (jtag_reset_config & RESET_SRST_PUSH_PULL) + { + LOG_ERROR("can't set nSRST to push-pull on the Dicarlo jtag"); + } + else + { + high_output |= nSRST; + } + + /* initialize high port */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; /* value */ + buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'Dicarlo' layout"); return ERROR_JTAG_INIT_FAILED; } @@ -1156,22 +1823,22 @@ int jtagkey_init(void) { u8 buf[3]; u32 bytes_written; - + low_output = 0x08; low_direction = 0x1b; - + /* initialize low byte for jtag */ buf[0] = 0x80; /* command "set data bits low byte" */ buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ - DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { - ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); + LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; } - + if (strcmp(layout->name, "jtagkey") == 0) { nTRST = 0x01; @@ -1179,7 +1846,8 @@ int jtagkey_init(void) nSRST = 0x02; nSRSTnOE = 0x08; } - else if (strcmp(layout->name, "jtagkey_prototype_v1") == 0) + else if ((strcmp(layout->name, "jtagkey_prototype_v1") == 0) || + (strcmp(layout->name, "oocdlink") == 0)) { nTRST = 0x02; nTRSTnOE = 0x1; @@ -1188,10 +1856,10 @@ int jtagkey_init(void) } else { - ERROR("BUG: jtagkey_init called for non jtagkey layout"); + LOG_ERROR("BUG: jtagkey_init called for non jtagkey layout"); exit(-1); } - + high_output = 0x0; high_direction = 0x0f; @@ -1205,7 +1873,7 @@ int jtagkey_init(void) high_output &= ~nTRSTnOE; high_output |= nTRST; } - + if (jtag_reset_config & RESET_SRST_PUSH_PULL) { high_output &= ~nSRSTnOE; @@ -1216,19 +1884,19 @@ int jtagkey_init(void) high_output |= nSRSTnOE; high_output &= ~nSRST; } - + /* initialize high port */ buf[0] = 0x82; /* command "set data bits high byte" */ buf[1] = high_output; /* value */ buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ - DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { - ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); + LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; } - + return ERROR_OK; } @@ -1236,22 +1904,22 @@ int olimex_jtag_init(void) { u8 buf[3]; u32 bytes_written; - + low_output = 0x08; low_direction = 0x1b; - + /* initialize low byte for jtag */ buf[0] = 0x80; /* command "set data bits low byte" */ buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ - DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { - ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); + LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; } - + nTRST = 0x01; nTRSTnOE = 0x4; nSRST = 0x02; @@ -1270,31 +1938,203 @@ int olimex_jtag_init(void) high_output &= ~nTRSTnOE; high_output |= nTRST; } - + if (jtag_reset_config & RESET_SRST_PUSH_PULL) { - ERROR("can't set nSRST to push-pull on the Olimex ARM-USB-OCD"); + LOG_ERROR("can't set nSRST to push-pull on the Olimex ARM-USB-OCD"); } else { high_output &= ~nSRST; } - + /* turn red LED on */ high_output |= 0x08; - + /* initialize high port */ buf[0] = 0x82; /* command "set data bits high byte" */ buf[1] = high_output; /* value */ buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ - DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); - + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) { - ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); + LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout"); return ERROR_JTAG_INIT_FAILED; } - + + return ERROR_OK; +} + +int flyswatter_init(void) +{ + u8 buf[3]; + u32 bytes_written; + + low_output = 0x18; + low_direction = 0xfb; + + /* initialize low byte for jtag */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE[12]=out, n[ST]srst=out */ + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + nTRST = 0x10; + nTRSTnOE = 0x0; /* not output enable for nTRST */ + nSRST = 0x20; + nSRSTnOE = 0x00; /* no output enable for nSRST */ + + high_output = 0x00; + high_direction = 0x0c; + + /* turn red LED1 on, LED2 off */ + high_output |= 0x08; + + /* initialize high port */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; /* value */ + buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */ + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + return ERROR_OK; +} + +int turtle_init(void) +{ + u8 buf[3]; + u32 bytes_written; + + low_output = 0x08; + low_direction = 0x5b; + + /* initialize low byte for jtag */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + nSRST = 0x40; + + high_output = 0x00; + high_direction = 0x0C; + + /* initialize high port */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; + buf[2] = high_direction; + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + return ERROR_OK; +} + +int comstick_init(void) +{ + u8 buf[3]; + u32 bytes_written; + + low_output = 0x08; + low_direction = 0x0b; + + /* initialize low byte for jtag */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + nTRST = 0x01; + nTRSTnOE = 0x00; /* no output enable for nTRST */ + nSRST = 0x02; + nSRSTnOE = 0x00; /* no output enable for nSRST */ + + high_output = 0x03; + high_direction = 0x03; + + /* initialize high port */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; + buf[2] = high_direction; + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + return ERROR_OK; +} + +int stm32stick_init(void) +{ + u8 buf[3]; + u32 bytes_written; + + low_output = 0x88; + low_direction = 0x8b; + + /* initialize low byte for jtag */ + buf[0] = 0x80; /* command "set data bits low byte" */ + buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */ + buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */ + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout"); + return ERROR_JTAG_INIT_FAILED; + } + + nTRST = 0x01; + nTRSTnOE = 0x00; /* no output enable for nTRST */ + nSRST = 0x80; + nSRSTnOE = 0x00; /* no output enable for nSRST */ + + high_output = 0x01; + high_direction = 0x03; + + /* initialize high port */ + buf[0] = 0x82; /* command "set data bits high byte" */ + buf[1] = high_output; + buf[2] = high_direction; + LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]); + + if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3)) + { + LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout"); + return ERROR_JTAG_INIT_FAILED; + } + return ERROR_OK; } @@ -1313,7 +2153,26 @@ void olimex_jtag_blink(void) /* set port pin low */ high_output |= 0x08; } - + + BUFFER_ADD = 0x82; + BUFFER_ADD = high_output; + BUFFER_ADD = high_direction; +} + +void turtle_jtag_blink(void) +{ + /* + * Turtelizer2 has two LEDs connected to ACBUS2 and ACBUS3 + */ + if (high_output & 0x08) + { + high_output = 0x04; + } + else + { + high_output = 0x08; + } + BUFFER_ADD = 0x82; BUFFER_ADD = high_output; BUFFER_ADD = high_direction; @@ -1327,13 +2186,14 @@ int ft2232_quit(void) status = FT_Close(ftdih); #elif BUILD_FT2232_LIBFTDI == 1 ftdi_disable_bitbang(&ftdic); - + ftdi_usb_close(&ftdic); - + ftdi_deinit(&ftdic); #endif free(ft2232_buffer); + ft2232_buffer = NULL; return ERROR_OK; } @@ -1346,9 +2206,23 @@ int ft2232_handle_device_desc_command(struct command_context_s *cmd_ctx, char *c } else { - ERROR("expected exactly one argument to ft2232_device_desc "); + LOG_ERROR("expected exactly one argument to ft2232_device_desc "); + } + + return ERROR_OK; +} + +int ft2232_handle_serial_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) +{ + if (argc == 1) + { + ft2232_serial = strdup(args[0]); + } + else + { + LOG_ERROR("expected exactly one argument to ft2232_serial "); } - + return ERROR_OK; } @@ -1365,15 +2239,43 @@ int ft2232_handle_layout_command(struct command_context_s *cmd_ctx, char *cmd, c int ft2232_handle_vid_pid_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) { - if (argc >= 2) + int i; + + if (argc > MAX_USB_IDS*2) { + LOG_WARNING("ignoring extra IDs in ft2232_vid_pid " + "(maximum is %d pairs)", MAX_USB_IDS); + argc = MAX_USB_IDS*2; + } + if (argc < 2 || (argc & 1)) { - ft2232_vid = strtol(args[0], NULL, 0); - ft2232_pid = strtol(args[1], NULL, 0); + LOG_WARNING("incomplete ft2232_vid_pid configuration directive"); + if (argc < 2) + return ERROR_OK; + } + + for (i = 0; i+1 < argc; i += 2) { + ft2232_vid[i >> 1] = strtol(args[i], NULL, 0); + ft2232_pid[i >> 1] = strtol(args[i+1], NULL, 0); + } + /* + * Explicitly terminate, in case there are multiples instances of + * ft2232_vid_pid. + */ + ft2232_vid[i >> 1] = ft2232_pid[i >> 1] = 0; + + return ERROR_OK; +} + +int ft2232_handle_latency_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc) +{ + if (argc == 1) + { + ft2232_latency = atoi(args[0]); } else { - WARNING("incomplete ft2232_vid_pid configuration directive"); + LOG_ERROR("expected exactly one argument to ft2232_latency "); } - + return ERROR_OK; }