X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=src%2Fjtag%2Fstartup.tcl;h=11a79779341488001978d030fbfc0379221642eb;hb=3d2dd4a3a31d730de244d2f35f351e826ced55b1;hp=999f5d02819bba6e65f19dfdf198ce298536d413;hpb=cb7dbc1af41068f826246beb53870c01d8973bb8;p=openocd.git

diff --git a/src/jtag/startup.tcl b/src/jtag/startup.tcl
index 999f5d0281..11a7977934 100644
--- a/src/jtag/startup.tcl
+++ b/src/jtag/startup.tcl
@@ -9,20 +9,45 @@ proc jtag_init {} {
 	}
 }
 
+# This reset logic may be overridden by board/target/... scripts as needed
+# to provide a reset that, if possible, is close to a power-up reset.
+#
+# Exit requirements include:  (a) JTAG must be working, (b) the scan
+# chain was validated with "jtag arp_init" (or equivalent), (c) nothing
+# stays in reset.  No TAP-specific scans were performed.  It's OK if
+# some targets haven't been reset yet; they may need TAP-specific scans.
+#
+# The "mode" values include:  halt, init, run (from "reset" command);
+# startup (at OpenOCD server startup, when JTAG may not yet work); and
+# potentially more (for reset types like cold, warm, etc)
+proc init_reset { mode } {
+	jtag arp_init-reset
+}
+
 #########
 
 # TODO: power_restore and power_dropout are currently neither
 # documented nor supported except on ZY1000.
 
 proc power_restore {} {
-	puts "Sensed power restore."
+	echo "Sensed power restore, running reset init and halting GDB."
 	reset init
+	
+	# Halt GDB so user can deal with a detected power restore.
+	#
+	# After GDB is halted, then output is no longer forwarded
+	# to the GDB console.
+	set targets [target names]	
+	foreach t $targets {
+		# New event script.
+		$t invoke-event arp_halt_gdb
+	}	
 }
 
 add_help_text power_restore "Overridable procedure run when power restore is detected. Runs 'reset init' by default."
 
 proc power_dropout {} {
-	puts "Sensed power dropout."
+	echo "Sensed power dropout."
 }
 
 #########
@@ -31,11 +56,54 @@ proc power_dropout {} {
 # documented nor supported except on ZY1000.
 
 proc srst_deasserted {} {
-	puts "Sensed nSRST deasserted."
+	echo "Sensed nSRST deasserted, running reset init and halting GDB."
 	reset init
+
+	# Halt GDB so user can deal with a detected reset.
+	#
+	# After GDB is halted, then output is no longer forwarded
+	# to the GDB console.
+	set targets [target names]	
+	foreach t $targets {
+		# New event script.
+		$t invoke-event arp_halt_gdb
+	}		
 }
+
 add_help_text srst_deasserted "Overridable procedure run when srst deassert is detected. Runs 'reset init' by default."
 
 proc srst_asserted {} {
-	puts "Sensed nSRST asserted."
+	echo "Sensed nSRST asserted."
+}
+
+# measure actual JTAG clock
+proc measure_clk {} {
+	set start_time [ms];
+	runtest 10000000; 
+	echo "Running at more than [expr 10000.0 / ([ms]-$start_time)] kHz";
+}
+
+add_help_text measure_clk "Runs a test to measure the JTAG clk. Useful with RCLK / RTCK."
+
+# BEGIN MIGRATION AIDS ...  these adapter operations originally had
+# JTAG-specific names despite the fact that the operations were not
+# specific to JTAG, or otherewise had troublesome/misleading names.
+#
+# FIXME phase these aids out after about April 2011
+#
+proc jtag_khz args {
+	echo "DEPRECATED! use 'adapter_khz' not 'jtag_khz'"
+	eval adapter_khz $args
+}
+
+proc jtag_nsrst_delay args {
+	echo "DEPRECATED! use 'adapter_nsrst_delay' not 'jtag_nsrst_delay'"
+	eval adapter_nsrst_delay $args
 }
+
+proc jtag_nsrst_assert_width args {
+	echo "DEPRECATED! use 'adapter_nsrst_assert_width' not 'jtag_nsrst_assert_width'"
+	eval adapter_nsrst_assert_width $args
+}
+
+# END MIGRATION AIDS