X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=src%2Ftarget%2Fdsp5680xx.c;h=ec07c2519da6ef5c1969181d526af1d58f8b22f5;hb=4cf5ab614bd830355065bb9400acf5484dc3f2c3;hp=ee26d24acfc75ceebc349c466d169deb2a8b317b;hpb=02bd67db3f85b9764b6c4a3556d070a3345e4103;p=openocd.git

diff --git a/src/target/dsp5680xx.c b/src/target/dsp5680xx.c
index ee26d24acf..ec07c2519d 100644
--- a/src/target/dsp5680xx.c
+++ b/src/target/dsp5680xx.c
@@ -117,7 +117,7 @@ static int dsp5680xx_drscan(struct target *target, uint8_t *d_in,
  * @param target
  * @param d_in This is the data that will be shifted into the JTAG IR reg.
  * @param d_out The data that will be shifted out of the JTAG IR reg will be stored here.
- * @apram ir_len Length of the data to be shifted to JTAG IR.
+ * @param ir_len Length of the data to be shifted to JTAG IR.
  *
  */
 static int dsp5680xx_irscan(struct target *target, uint32_t *d_in,
@@ -1070,8 +1070,8 @@ static int dsp5680xx_resume(struct target *target, int current,
 }
 
 /**
- * The value of @address determines if it corresponds to P: (program) or X: (dat) memory.
- * If the address is over 0x200000 then it is considered X: memory, and @pmem = 0.
+ * The value of @a address determines if it corresponds to P: (program) or X: (dat) memory.
+ * If the address is over 0x200000 then it is considered X: memory, and @a pmem = 0.
  * The special case of 0xFFXXXX is not modified, since it allows to read out the
  * memory mapped EOnCE registers.
  *
@@ -1405,8 +1405,8 @@ static int dsp5680xx_write_32(struct target *t, uint32_t a, uint32_t c,
 }
 
 /**
- * Writes @buffer to memory.
- * The parameter @address determines whether @buffer should be written to
+ * Writes @a buffer to memory.
+ * The parameter @a address determines whether @a buffer should be written to
  * P: (program) memory or X: (dat) memory.
  *
  * @param target
@@ -1506,8 +1506,8 @@ static int dsp5680xx_checksum_memory(struct target *t, target_addr_t a, uint32_t
 }
 
 /**
- * Calculates a signature over @word_count words in the data from @buff16.
- * The algorithm used is the same the FM uses, so the @return may be used to compare
+ * Calculates a signature over @a word_count words in the data from @a buff16.
+ * The algorithm used is the same the FM uses, so the @a return may be used to compare
  * with the one generated by the FM module, and check if flashing was successful.
  * This algorithm is based on the perl script available from the Freescale website at FAQ 25630.
  *
@@ -1606,14 +1606,14 @@ int dsp5680xx_f_protect_check(struct target *target, uint16_t *protected)
 
 /**
  * Executes a command on the FM module.
- * Some commands use the parameters @address and @data, others ignore them.
+ * Some commands use the parameters @a address and @a data, others ignore them.
  *
  * @param target
  * @param command Command to execute.
  * @param address Command parameter.
  * @param data Command parameter.
  * @param hfm_ustat FM status register.
- * @param pmem Address is P: (program) memory (@pmem == 1) or X: (dat) memory (@pmem == 0)
+ * @param pmem Address is P: (program) memory (@a pmem == 1) or X: (dat) memory (@a pmem == 0)
  *
  * @return
  */
@@ -1787,9 +1787,9 @@ static int set_fm_ck_div(struct target *target)
 
 /**
  * Executes the FM calculate signature command. The FM will calculate over the
- * data from @address to @address + @words -1. The result is written to a
- * register, then read out by this function and returned in @signature. The
- * value @signature may be compared to the one returned by perl_crc to
+ * data from @a address to @a address + @a words -1. The result is written to a
+ * register, then read out by this function and returned in @a signature. The
+ * value @a signature may be compared to the one returned by perl_crc to
  * verify the flash was written correctly.
  *
  * @param target