X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s1968.cfg;h=8d990b1983d88046e3870d7ba1c76e8ab772fc5b;hb=288a1f453d2c786332946f16d5610950daeb83e5;hp=184d368e8108fd4f47c1f928099008df96df69aa;hpb=31b47688ca5015bc91fb3480135a9e4efd53586a;p=openocd.git

diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index 184d368e81..8d990b1983 100644
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -1,7 +1,8 @@
 #
 # TI/Luminary Stellaris LM3S1968 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s1968
+#
 
 # NOTE:  to use J-Link instead of the on-board interface,
 # you may also need to reduce adapter_khz to be about 1200.
@@ -10,16 +11,9 @@
 # include the FT2232 interface config for on-board JTAG interface
 # NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
 # so is using in JTAG mode, as done here.
-source [find interface/luminary.cfg]
+source [find interface/ftdi/luminary.cfg]
 
 # include the target config
+set WORKAREASIZE 0x2000
 set CHIPNAME lm3s1968
 source [find target/stellaris.cfg]
-
-# jtag speed
-adapter_khz 3000
-
-adapter_nsrst_delay 100
-
-#LM3S1968 Evaluation Board has only srst
-reset_config srst_only