X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s1968.cfg;h=e79452c796770d2e55a84340a6fbeac0632458ab;hb=108a458ab88880d063c29e1d09820fe6b62251dc;hp=3afdc955072d97f5b1718ee263c12b264c2deb07;hpb=2a0e491d9aec5fee9c1693f32a5174c7e1459faa;p=openocd.git

diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index 3afdc95507..e79452c796 100644
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -4,20 +4,15 @@
 # http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html
 
 # NOTE:  to use J-Link instead of the on-board interface,
-# you may also need to reduce jtag_khz to be about 1200.
+# you may also need to reduce adapter_khz to be about 1200.
 # source [find interface/jlink.cfg]
 
 # include the FT2232 interface config for on-board JTAG interface
+# NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
+# so is using in JTAG mode, as done here.
 source [find interface/luminary.cfg]
 
 # include the target config
-source [find target/lm3s1968.cfg]
-
-# jtag speed
-jtag_khz 3000
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#LM3S1968 Evaluation Board has only srst
-reset_config srst_only
+set WORKAREASIZE 0x2000
+set CHIPNAME lm3s1968
+source [find target/stellaris.cfg]