X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s811.cfg;h=d7fe243e64ab9a14233ebc4931b2e453751023e6;hb=c8864333327cba8121ac83895eb8d7b455f489fa;hp=f036bc5e0a50f70dfe6700ee6761ba8b2bbfb2fb;hpb=70794664f1a923c1fa2912f2b3ac81c7c1fc1ff5;p=openocd.git

diff --git a/tcl/board/ek-lm3s811.cfg b/tcl/board/ek-lm3s811.cfg
index f036bc5e0a..d7fe243e64 100644
--- a/tcl/board/ek-lm3s811.cfg
+++ b/tcl/board/ek-lm3s811.cfg
@@ -1,20 +1,15 @@
 #
 # TI/Luminary Stellaris LM3S811 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s811
+#
 
 # NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
 # so is using it in JTAG mode, as done here.
 # NOTE:  older '811-EK boards (before rev C) shouldn't use this.
-source [find interface/luminary.cfg]
-
-   set  CHIPNAME lm3s811
+source [find interface/ftdi/luminary.cfg]
 
 # include the target config
+set WORKAREASIZE 0x2000
+set CHIPNAME lm3s811
 source [find target/stellaris.cfg]
-
-
-adapter_nsrst_delay 100
-
-#LM3S811 Evaluation Board has only srst
-reset_config srst_only