X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s9b9x.cfg;h=6dd7b31a89539fb40c6fb2e3149a6adaa72683c3;hb=0baecf99437110356917430af396692fbc53a895;hp=2bc852962d892a2e31722d6e4348746bc0a019d6;hpb=7b2687b45bb1ff5fab478c76838a347f262d5f67;p=openocd.git

diff --git a/tcl/board/ek-lm3s9b9x.cfg b/tcl/board/ek-lm3s9b9x.cfg
index 2bc852962d..6dd7b31a89 100644
--- a/tcl/board/ek-lm3s9b9x.cfg
+++ b/tcl/board/ek-lm3s9b9x.cfg
@@ -1,13 +1,13 @@
 #
-# Luminary Micro Stellaris LM3S9B9x Evaluation Kits
+# TI/Luminary Stellaris LM3S9B9x Evaluation Kits
 #
-# http://www.luminarymicro.com/products/ek-lm3s9b90.html
-# http://www.luminarymicro.com/products/ek-lm3s9b92.html
+# http://www.ti.com/tool/ek-lm3s9b90
+# http://www.ti.com/tool/ek-lm3s9b92
 #
 
 # NOTE:  using the bundled FT2232 JTAG/SWD/SWO interface is optional!
 # so is using in JTAG mode, as done here.
-source [find interface/luminary-icdi.cfg]
+source [find interface/ftdi/luminary-icdi.cfg]
 
 set WORKAREASIZE 0x4000
 set CHIPNAME lm3s9b9x