X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s9b9x.cfg;h=6dd7b31a89539fb40c6fb2e3149a6adaa72683c3;hb=0baecf99437110356917430af396692fbc53a895;hp=ccf7c8833e6ff539130db5e8f5b1c102ef36c49d;hpb=f130f95d455332a114e468b3f77a203e3fdf4aee;p=openocd.git

diff --git a/tcl/board/ek-lm3s9b9x.cfg b/tcl/board/ek-lm3s9b9x.cfg
index ccf7c8833e..6dd7b31a89 100644
--- a/tcl/board/ek-lm3s9b9x.cfg
+++ b/tcl/board/ek-lm3s9b9x.cfg
@@ -1,18 +1,14 @@
 #
-# Luminary Micro Stellaris LM3S9B9x Evaluation Kits
+# TI/Luminary Stellaris LM3S9B9x Evaluation Kits
 #
-# http://www.luminarymicro.com/products/ek-lm3s9b90.html
-# http://www.luminarymicro.com/products/ek-lm3s9b92.html
+# http://www.ti.com/tool/ek-lm3s9b90
+# http://www.ti.com/tool/ek-lm3s9b92
 #
 
-source [find interface/luminary-icdi.cfg]
-source [find target/lm3s9b9x.cfg]
+# NOTE:  using the bundled FT2232 JTAG/SWD/SWO interface is optional!
+# so is using in JTAG mode, as done here.
+source [find interface/ftdi/luminary-icdi.cfg]
 
-# jtag speed
-jtag_khz 500
-
-jtag_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#LM3S9B9x Evaluation Board has only srst
-reset_config srst_only
+set WORKAREASIZE 0x4000
+set CHIPNAME lm3s9b9x
+source [find target/stellaris.cfg]