X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fembedded-artists_lpc2478-32.cfg;h=b036cd69cd709f1b5fe7985e9fd6484a318cf78f;hb=108a458ab88880d063c29e1d09820fe6b62251dc;hp=1bbf4bb659f779f41b37581f0afb748094ce93f1;hpb=30da7c67cec8b315972377b5389735ff11f6042c;p=openocd.git diff --git a/tcl/board/embedded-artists_lpc2478-32.cfg b/tcl/board/embedded-artists_lpc2478-32.cfg index 1bbf4bb659..b036cd69cd 100644 --- a/tcl/board/embedded-artists_lpc2478-32.cfg +++ b/tcl/board/embedded-artists_lpc2478-32.cfg @@ -1,24 +1,10 @@ # Embedded Artists eval board for LPC2478 # http://www.embeddedartists.com/ -# Delays on reset lines -adapter_nsrst_delay 500 -jtag_ntrst_delay 1 - -# Adaptive JTAG clocking through RTCK. -# -jtag_rclk 20 - # Target device: LPC2478 set CCLK 72000 source [find target/lpc2478.cfg] -# A working area will help speeding the flash programming -$_TARGETNAME configure -work-area-phys 0x40000200 -work-area-size [expr 0x10000-0x200-0x20] -work-area-backup 0 - -# External 16-bit flash at chip select CS0 (SST39VF3201-70, 4 MiB) -flash bank $_CHIPNAME.extflash cfi 0x80000000 0x400000 2 2 $_TARGETNAME jedec_probe - # Helper # proc read_register {register} { @@ -27,6 +13,106 @@ proc read_register {register} { return $result(0) } +proc init_board {} { + # Delays on reset lines + adapter_nsrst_delay 500 + jtag_ntrst_delay 1 + + # Adaptive JTAG clocking through RTCK. + # + jtag_rclk 20 + + global _TARGETNAME + global _CHIPNAME + + # A working area will help speeding the flash programming + $_TARGETNAME configure -work-area-phys 0x40000200 -work-area-size [expr 0x10000-0x200-0x20] -work-area-backup 0 + + # External 16-bit flash at chip select CS0 (SST39VF3201-70, 4 MiB) + flash bank $_CHIPNAME.extflash cfi 0x80000000 0x400000 2 2 $_TARGETNAME jedec_probe + + # Event handlers + # + $_TARGETNAME configure -event reset-start { + # Back to the slow JTAG clock + jtag_rclk 20 + } + + $_TARGETNAME configure -event reset-init { + arm core_state arm + arm7_9 dcc_downloads enable ;# Speed up downloads by using DCC transfer + arm7_9 fast_memory_access enable + + # Peripheral clocks + mww 0xE01FC0C4 0x04280FFE ;# PCONP: (reset value) + + # Map the user flash to the vector table area (0x00...0x3F) + mww 0xE01FC040 0x00000001 ;# MEMMAP: User flash + + # Memory accelerator module + mww 0xE01FC004 0x00000003 ;# MAMTIM: 3 clock cycles + mww 0xE01FC000 0x00000002 ;# MAMCR: fully enabled + + # Enable external memory bus (32-bit SDRAM at DYCS0, 16-bit flash at CS0) + mww 0xE002C014 0x55010115 ;# PINSEL5: P2.16=CAS, P2.17=RAS, P2.18=CLKOUT0, + # P2.20=DYCS0, P2.24=CKEOUT0, P2.28=DQMOUT0, + # P2.29=DQMOUT1, P2.30=DQMOUT2, P2.31=DQMOUT3 + mww 0xE002C018 0x55555555 ;# PINSEL6: P3.0...P3.15=D0...D15 + mww 0xE002C01C 0x55555555 ;# PINSEL7: P3.16...P3.31=D16...D31 + mww 0xE002C020 0x55555555 ;# PINSEL8: P4.0...P4.15=A0...A15 + mww 0xE002C024 0x50051555 ;# PINSEL9: P4.16...P4.22=A16...A22, P4.24=OE, + # P4.25=WE, P4.30=CS0, P4.31=CS1 + mww 0xFFE08000 0x00000001 ;# EMCControl: Enable EMC + + # Start PLL, then use faster JTAG clock + enable_pll + jtag_rclk 3000 + + # 16-bit flash @ CS0 (SST39VF3201-70) + mww 0xFFE08200 0x00080081 ;# EMCStaticConfig0: 16 bit, PB=1, buffers on + mww 0xFFE08204 0x00000000 ;# EMCStaticWaitWen0 + mww 0xFFE08208 0x00000000 ;# EMCStaticWaitOen0 + mww 0xFFE0820C 0x00000005 ;# EMCStaticWaitRd0 + mww 0xFFE08210 0x00000005 ;# EMCStaticWaitPage0 + mww 0xFFE08214 0x00000003 ;# EMCStaticWaitWr0 + mww 0xFFE08218 0x00000001 ;# EMCStaticWaitTurn0 + + # 8-bit NAND @ CS1 + # TODO + + # 32-bit SDRAM @ DYCS0 (K4M563233G-HN75) + mww 0xFFE08028 0x00000001 ;# EMCDynamicReadConfig + mww 0xFFE08030 0x00000001 ;# EMCDynamicRP + mww 0xFFE08034 0x00000003 ;# EMCDynamicRAS + mww 0xFFE08038 0x00000005 ;# EMCDynamicSREX + mww 0xFFE0803C 0x00000001 ;# EMCDynamicAPR + mww 0xFFE08040 0x00000005 ;# EMCDynamicDAL + mww 0xFFE08044 0x00000001 ;# EMCDynamicWR + mww 0xFFE08048 0x00000005 ;# EMCDynamicRC + mww 0xFFE0804C 0x00000005 ;# EMCDynamicRFC + mww 0xFFE08050 0x00000005 ;# EMCDynamicXSR + mww 0xFFE08054 0x00000001 ;# EMCDynamicRRD + mww 0xFFE08058 0x00000001 ;# EMCDynamicMRD + # + mww 0xFFE08104 0x00000202 ;# EMCDynamicRasCas0 + mww 0xFFE08100 0x00005488 ;# EMCDynamicConfig0 + sleep 100 + mww 0xFFE08020 0x00000183 ;# EMCDynamicControl: Clock on continuously, NOP + sleep 10 + mww 0xFFE08020 0x00000103 ;# EMCDynamicControl: PRECHARGE-ALL + mww 0xFFE08024 0x00000046 ;# EMCDynamicRefresh + sleep 100 + mww 0xFFE08020 0x00000083 ;# EMCDynamicControl: MODE + mdw 0xA0011000 1 ;# Set SDRAM mode register + mww 0xFFE08020 0x00000000 ;# EMCDynamicControl: NORMAL + mww 0xFFE08100 0x00085488 ;# EMCDynamicConfig0: Enable buffers + } + + $_TARGETNAME configure -event gdb-attach { + # Without this gdb-attach will first time as probe will fail + reset init + } +} # Enable the PLL. # Generate maximum CPU clock (72 MHz) Run from internal RC oscillator. @@ -66,83 +152,3 @@ proc enable_pll {} { mww 0xE01FC08C 0x00000055 ;# PLLFEED } - -# Event handlers -# -$_TARGETNAME configure -event reset-start { - # Back to the slow JTAG clock - jtag_rclk 20 -} - - -$_TARGETNAME configure -event reset-init { - - arm core_state arm - arm7_9 dcc_downloads enable ;# Speed up downloads by using DCC transfer - arm7_9 fast_memory_access enable - - # Peripheral clocks - mww 0xE01FC0C4 0x04280FFE ;# PCONP: (reset value) - - # Map the user flash to the vector table area (0x00...0x3F) - mww 0xE01FC040 0x00000001 ;# MEMMAP: User flash - - # Memory accelerator module - mww 0xE01FC004 0x00000003 ;# MAMTIM: 3 clock cycles - mww 0xE01FC000 0x00000002 ;# MAMCR: fully enabled - - # Enable external memory bus (32-bit SDRAM at DYCS0, 16-bit flash at CS0) - mww 0xE002C014 0x55010115 ;# PINSEL5: P2.16=CAS, P2.17=RAS, P2.18=CLKOUT0, - # P2.20=DYCS0, P2.24=CKEOUT0, P2.28=DQMOUT0, - # P2.29=DQMOUT1, P2.30=DQMOUT2, P2.31=DQMOUT3 - mww 0xE002C018 0x55555555 ;# PINSEL6: P3.0...P3.15=D0...D15 - mww 0xE002C01C 0x55555555 ;# PINSEL7: P3.16...P3.31=D16...D31 - mww 0xE002C020 0x55555555 ;# PINSEL8: P4.0...P4.15=A0...A15 - mww 0xE002C024 0x50051555 ;# PINSEL9: P4.16...P4.22=A16...A22, P4.24=OE, - # P4.25=WE, P4.30=CS0, P4.31=CS1 - mww 0xFFE08000 0x00000001 ;# EMCControl: Enable EMC - - # Start PLL, then use faster JTAG clock - enable_pll - jtag_rclk 3000 - - # 16-bit flash @ CS0 (SST39VF3201-70) - mww 0xFFE08200 0x00080081 ;# EMCStaticConfig0: 16 bit, PB=1, buffers on - mww 0xFFE08204 0x00000000 ;# EMCStaticWaitWen0 - mww 0xFFE08208 0x00000000 ;# EMCStaticWaitOen0 - mww 0xFFE0820C 0x00000005 ;# EMCStaticWaitRd0 - mww 0xFFE08210 0x00000005 ;# EMCStaticWaitPage0 - mww 0xFFE08214 0x00000003 ;# EMCStaticWaitWr0 - mww 0xFFE08218 0x00000001 ;# EMCStaticWaitTurn0 - - # 8-bit NAND @ CS1 - # TODO - - # 32-bit SDRAM @ DYCS0 (K4M563233G-HN75) - mww 0xFFE08028 0x00000001 ;# EMCDynamicReadConfig - mww 0xFFE08030 0x00000001 ;# EMCDynamicRP - mww 0xFFE08034 0x00000003 ;# EMCDynamicRAS - mww 0xFFE08038 0x00000005 ;# EMCDynamicSREX - mww 0xFFE0803C 0x00000001 ;# EMCDynamicAPR - mww 0xFFE08040 0x00000005 ;# EMCDynamicDAL - mww 0xFFE08044 0x00000001 ;# EMCDynamicWR - mww 0xFFE08048 0x00000005 ;# EMCDynamicRC - mww 0xFFE0804C 0x00000005 ;# EMCDynamicRFC - mww 0xFFE08050 0x00000005 ;# EMCDynamicXSR - mww 0xFFE08054 0x00000001 ;# EMCDynamicRRD - mww 0xFFE08058 0x00000001 ;# EMCDynamicMRD - # - mww 0xFFE08104 0x00000202 ;# EMCDynamicRasCas0 - mww 0xFFE08100 0x00005488 ;# EMCDynamicConfig0 - sleep 100 - mww 0xFFE08020 0x00000183 ;# EMCDynamicControl: Clock on continuously, NOP - sleep 10 - mww 0xFFE08020 0x00000103 ;# EMCDynamicControl: PRECHARGE-ALL - mww 0xFFE08024 0x00000046 ;# EMCDynamicRefresh - sleep 100 - mww 0xFFE08020 0x00000083 ;# EMCDynamicControl: MODE - mdw 0xA0011000 1 ;# Set SDRAM mode register - mww 0xFFE08020 0x00000000 ;# EMCDynamicControl: NORMAL - mww 0xFFE08100 0x00085488 ;# EMCDynamicConfig0: Enable buffers -} -