X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fimx31pdk.cfg;h=502d4077430955983a244c08f224c83fe5d0a613;hb=ded2b293f4736283d2f0e56cabc267491cee0c5d;hp=2318e44bdd2b1aa8d9e30432cb30cd750005e374;hpb=71af49ca7fb11b0bd0c1ba9578826f49288b68ef;p=openocd.git

diff --git a/tcl/board/imx31pdk.cfg b/tcl/board/imx31pdk.cfg
index 2318e44bdd..502d407743 100644
--- a/tcl/board/imx31pdk.cfg
+++ b/tcl/board/imx31pdk.cfg
@@ -1,64 +1,64 @@
 # The IMX31PDK eval board has a single IMX31 chip
 source [find target/imx31.cfg]
-$_TARGETNAME configure -event gdb-attach { reset init }
+source [find target/imx.cfg]
 $_TARGETNAME configure -event reset-init { imx31pdk_init }
 
-proc imx31pdk_init { } {
-	# This setup puts RAM at 0x80000000
+proc self_test {} {
+	echo "Running 100 iterations of test."
+	dump_image /ram/test 0x80000000 0x40000
+	for {set i 0} {$i < 100} {set i [expr $i+1]} {
+		echo "Iteration $i"
+		reset init
+		mww 0x80000000 0x12345678 0x10000
+		load_image /ram/test 0x80000000 bin
+		verify_image /ram/test 0x80000000 bin
+	}
+}
 
-	# reset the board correctly
-	reset run
-	reset halt
 
-	# ========================================
-	# Init CCM
-	# ========================================
-	mww 0x53FC0000 0x040
-	mww 0x53F80000 0x074B0B7D
+# Slow fallback frequency
+# measure_clk indicates ca. 3-4MHz.
+jtag_rclk 1000
 
-	sleep 100
+proc imx31pdk_init { } {
 
-	# ========================================
-	# 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
-	# ========================================
-	mww 0x53F80004 0xFF871D50
-	mww 0x53F80010 0x00271C1B
+	imx3x_reset
 
-	# ========================================
-	# Configure CPLD on CS5
-	# ========================================
-	mww 0xb8002050 0x0000DCF6
-	mww 0xb8002054 0x444A4541
-	mww 0xb8002058 0x44443302
+	# This setup puts RAM at 0x80000000
 
-	# ========================================
+	mww 0x53FC0000 0x040
+	mww 0x53F80000 0x074B0B7D
+	
+	# 399MHz - 26MHz input, PD=1,MFI=7, MFN=27, MFD=40
+	#mww 0x53F80004 0xFF871D50
+	#mww 0x53F80010 0x00271C1B
+	
+	# Start 16 bit NorFlash Initialization on CS0
+	mww 0xb8002000 0x0000CC03
+	mww 0xb8002004 0xa0330D01
+	mww 0xb8002008 0x00220800
+	
+	# Configure CPLD on CS4
+	mww 0xb8002040 0x0000DCF6
+	mww 0xb8002044 0x444A4541
+	mww 0xb8002048 0x44443302
+	
 	# SDCLK
-	# ========================================
 	mww 0x43FAC26C 0
-
-	# ========================================
+	
 	# CAS
-	# ========================================
 	mww 0x43FAC270 0
-
-	# ========================================
+	
 	# RAS
-	# ========================================
 	mww 0x43FAC274 0
-
-	# ========================================
+	
 	# CS2 (CSD0)
-	# ========================================
 	mww 0x43FAC27C 0x1000
-
-	# ========================================
+	
 	# DQM3
-	# ========================================
 	mww 0x43FAC284 0
-
-	# ========================================
+	
 	# DQM2, DQM1, DQM0, SD31-SD0, A25-A0, MA10 (0x288..0x2DC)
-	# ========================================
 	mww 0x43FAC288 0
 	mww 0x43FAC28C 0
 	mww 0x43FAC290 0
@@ -81,10 +81,8 @@ proc imx31pdk_init { } {
 	mww 0x43FAC2D4 0
 	mww 0x43FAC2D8 0
 	mww 0x43FAC2DC 0
-
-	# ========================================
-	# Initialization script for 32 bit DDR on MX31 PDK
-	# ========================================
+	
+	# Initialization script for 32 bit DDR on MX31 ADS
 	mww 0xB8001010 0x00000004
 	mww 0xB8001004 0x006ac73a
 	mww 0xB8001000 0x92100000