X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Flubbock.cfg;h=298954cc0678f4a32d66f0e0fcb88c1a7c2e7689;hb=a15c11d7d08566dc7005ed7304c5d3f2c425b981;hp=095c60aacf09a5a54ed5119d28fedac8901687b8;hpb=b559b273b526b3077b3ca219eecc8df9f86efac0;p=openocd.git

diff --git a/tcl/board/lubbock.cfg b/tcl/board/lubbock.cfg
index 095c60aacf..298954cc06 100644
--- a/tcl/board/lubbock.cfg
+++ b/tcl/board/lubbock.cfg
@@ -12,9 +12,9 @@ jtag_ntrst_delay 250
 
 # CS0, CS1 -- two banks of CFI flash, 32 MBytes each
 # each bank is 32-bits wide, two 16-bit chips in parallel
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
 flash bank $_FLASHNAME cfi 0x00000000 0x02000000 2 4 $_TARGETNAME
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
 flash bank $_FLASHNAME cfi 0x04000000 0x02000000 2 4 $_TARGETNAME
 
 # CS2 low -- FPGA registers
@@ -38,7 +38,7 @@ proc hexled {u32} {
 
 proc lubbock_init {target} {
 
-	puts "Initialize PXA255 Lubbock board"
+	echo "Initialize PXA255 Lubbock board"
 
 	# (1) pinmux