X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Ftopas910.cfg;h=9f994c8ea61ee7601381d4b9c4819165234c1a00;hb=2053120ba10d68339c61cd2b247bde01bda41ab7;hp=01ace63e729ac2141bfdecdb678de2fe1e096979;hpb=32599fab1ac1f77b8f64fde0cd7668bd0f5f1c50;p=openocd.git

diff --git a/tcl/board/topas910.cfg b/tcl/board/topas910.cfg
index 01ace63e72..9f994c8ea6 100644
--- a/tcl/board/topas910.cfg
+++ b/tcl/board/topas910.cfg
@@ -30,7 +30,7 @@ proc topas910_init { } {
 # Init SDRAM
 #  _PMCDRV          = 0x00000071;
 #  //
-#  // Initialize SDRAM timing paramater
+#  // Initialize SDRAM timing parameter
 #  //
 #  _DMC_CAS_LATENCY = 0x00000006;
 #  _DMC_T_DQSS      = 0x00000000;
@@ -99,7 +99,7 @@ proc topas910_init { } {
 	mww 0xf4300004 0x00000000
 
 	sleep 10
-#	jtag_speed 10000
+#	adapter speed NNNN
 
 # remap off in case of IROM boot
 	mww 0xf0000004 0x00000001
@@ -107,12 +107,13 @@ proc topas910_init { } {
 }
 
 # comment the following out if usinf J-Link, it soes not support DCC
-arm7_9 dcc_downloads enable       # Enable faster DCC downloads
+arm7_9 dcc_downloads enable       ;# Enable faster DCC downloads
 
 
 #####################
 # Flash configuration
 #####################
 
-#flash bank cfi <base> <size> <chip width> <bus width> <target#>
-flash bank cfi 0x20000000 0x2000000 2 2 0
+#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x20000000 0x2000000 2 2 $_TARGETNAME