X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fzy1000.cfg;h=d2561e9f6f717bceba123e717805d5db4cc67344;hb=7b76da57f471e77a24519c10927aab79890783a9;hp=07f5ee99482a7e630ff6068dbee54a93af95d9b8;hpb=71af49ca7fb11b0bd0c1ba9578826f49288b68ef;p=openocd.git

diff --git a/tcl/board/zy1000.cfg b/tcl/board/zy1000.cfg
index 07f5ee9948..d2561e9f6f 100644
--- a/tcl/board/zy1000.cfg
+++ b/tcl/board/zy1000.cfg
@@ -31,14 +31,16 @@ if { [info exists CPUTAPID ] } {
 }
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # at CPU CLK <32kHz this must be disabled
 arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable
 
-flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x01000000 0x200000 2 2 $_TARGETNAME
+
 $_TARGETNAME configure -event reset-init {
 	# Set up chip selects & timings
 	mww 0xFFE00000 0x0100273D
@@ -61,11 +63,16 @@ $_TARGETNAME configure -event reset-init {
 	mww 0x08020004 0
 }
 
+$_TARGETNAME configure -event gdb-attach {
+	# Without this gdb-attach will first time as probe will fail
+	reset init
+}
+
 # required for usable performance. Used for lots of
 # other things than flash programming.
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0
 
-jtag_khz 16000
+adapter_khz 16000
 
 
 proc production_info {} {