X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Fboard%2Fzy1000.cfg;h=d2561e9f6f717bceba123e717805d5db4cc67344;hb=7b76da57f471e77a24519c10927aab79890783a9;hp=8278fa4696e8422022177d4b1406b8a150979604;hpb=4a2f4e34336dbb662a308e5a881edbba9f3657ec;p=openocd.git

diff --git a/tcl/board/zy1000.cfg b/tcl/board/zy1000.cfg
index 8278fa4696..d2561e9f6f 100644
--- a/tcl/board/zy1000.cfg
+++ b/tcl/board/zy1000.cfg
@@ -39,7 +39,8 @@ arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable
 
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 $_TARGETNAME ecos/at91eb40a.elf
+flash bank $_FLASHNAME cfi 0x01000000 0x200000 2 2 $_TARGETNAME
+
 $_TARGETNAME configure -event reset-init {
 	# Set up chip selects & timings
 	mww 0xFFE00000 0x0100273D
@@ -62,11 +63,16 @@ $_TARGETNAME configure -event reset-init {
 	mww 0x08020004 0
 }
 
+$_TARGETNAME configure -event gdb-attach {
+	# Without this gdb-attach will first time as probe will fail
+	reset init
+}
+
 # required for usable performance. Used for lots of
 # other things than flash programming.
 $_TARGETNAME configure -work-area-phys 0x00020000 -work-area-size 0x20000 -work-area-backup 0
 
-jtag_khz 16000
+adapter_khz 16000
 
 
 proc production_info {} {