X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Faduc702x.cfg;h=50b2a0de527d328140a07106e11e0e5f5a701961;hb=257a764582f52235414b5c35717b0ee2b49d4b0d;hp=7e62735dea4c5e7e01c039a4fb36254fb1fb8113;hpb=ce89c7bf6588c7b2800c4ca453278b6f94795130;p=openocd.git

diff --git a/tcl/target/aduc702x.cfg b/tcl/target/aduc702x.cfg
index 7e62735dea..50b2a0de52 100644
--- a/tcl/target/aduc702x.cfg
+++ b/tcl/target/aduc702x.cfg
@@ -1,34 +1,25 @@
-## -*- tcl -*-
-##
-
-
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME aduc702x
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
   # This config file was defaulting to big endian..
    set  _ENDIAN little
 }
 
-if { [info exists CPUTAPID] } {	
-   set  _CPUTAPID $CPUTAPID    
-} else {	 
+if { [info exists CPUTAPID] } {
+   set  _CPUTAPID $CPUTAPID
+} else {
    set  _CPUTAPID 0x3f0f0f0f
 }
 
-
 jtag_nsrst_delay 200
 jtag_ntrst_delay 200
 
-# This is for the case that TRST/SRST is not wired on your JTAG adaptor.
-# Don't really need them anyways.  
-reset_config none
-
 ## JTAG scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
@@ -44,7 +35,8 @@ $_TARGETNAME configure -work-area-phys 0x10000 -work-area-size 0x2000
 
 ## flash configuration
 # only target number is needed
-flash bank aduc702x 0 0 0 0 0
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME aduc702x 0 0 0 0 $_TARGETNAME
 
 ## If you use the watchdog, the following code makes sure that the board
 ## doesn't reboot when halted via JTAG.  Yes, on the older generation