X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Ficepick.cfg;h=abd7b6a084db6c5468edc49db3acffcaf97241c1;hb=5396ec5dcc64354c8101f8d3f16d498ca3b10326;hp=093d2092fc0f1ce76300264e22bd892442fcc01d;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3;p=openocd.git

diff --git a/tcl/target/icepick.cfg b/tcl/target/icepick.cfg
index 093d2092fc..abd7b6a084 100644
--- a/tcl/target/icepick.cfg
+++ b/tcl/target/icepick.cfg
@@ -3,8 +3,9 @@
 # Copyright (C)   2009        by David Brownell
 #
 
-# Utilities for TI ICEpick-C ... used in DaVinci, OMAP3, and more.
-# Details about the ICEPickC are available in the AM/DM37x document SPRUGN4M
+# Utilities for TI ICEpick-C/D used in most TI SoCs
+# Details about the ICEPick are available in the the TRM for each SoC
+# and http://processors.wiki.ti.com/index.php/ICEPICK
 
 # create "constants"
 proc CONST { key } {
@@ -106,6 +107,32 @@ proc icepick_c_tapenable {jrc port} {
 	runtest 10
 }
 
+# jrc	== TAP name for the ICEpick
+# coreid== core id number 0..15 (not same as port number!)
+proc icepick_d_set_coreid {jrc coreid } {
+	icepick_c_router $jrc 1 0x6 $coreid 0x2008
+}
+
+# jrc	== TAP name for the ICEpick
+# port	== a port number, 0..15
+# Follow the sequence described in
+# http://processors.wiki.ti.com/images/f/f6/Router_Scan_Sequence-ICEpick-D.pdf
+proc icepick_d_tapenable {jrc port coreid} {
+	# First CONNECT to the ICEPick
+	icepick_c_connect $jrc
+	icepick_c_setup $jrc
+
+	# Select the port
+	icepick_c_router $jrc 1 0x2 $port 0x2108
+
+	# Set 4 bit core ID to the Cortex-A
+	icepick_d_set_coreid $jrc $coreid
+
+	# Enter the bypass state
+	irscan $jrc [CONST IF_BYPASS] -endstate RUN/IDLE
+	runtest 10
+}
+
 # This function uses the ICEPick to send a warm system reset
 proc icepick_c_wreset {jrc} {