X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fimx21.cfg;h=2d9ce39c61f7e80e0b13812db1fc19dec6f3d785;hb=16432e681e0d776d7f40f14ad0aed3f7e17b848b;hp=3a02cac6c87bcefe03c96cdc15edd18036d89011;hpb=3ce038baa3faf93bed39792743ffba6abb085324;p=openocd.git

diff --git a/tcl/target/imx21.cfg b/tcl/target/imx21.cfg
index 3a02cac6c8..2d9ce39c61 100644
--- a/tcl/target/imx21.cfg
+++ b/tcl/target/imx21.cfg
@@ -3,32 +3,32 @@
 # Hmmm.... should srst_pulls_trst be used here like i.MX27???
 reset_config trst_and_srst
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME imx21
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME imx21
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
 }
 
 
-# Note above there is 1 tap 
+# Note above there is 1 tap
 
 # The CPU tap
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x0792611f
 }
-jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 
 # Create the GDB Target.
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 arm7_9 dcc_downloads enable