X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fimx27.cfg;h=4a93a67537559e2bb33d4f45fdc5a7c9ea270c58;hb=d70d9634bf6ab73ec4f2ac1e77012785770b460a;hp=b4dc8a986cb56622d005f8fc41eb65523af3beb4;hpb=3ce038baa3faf93bed39792743ffba6abb085324;p=openocd.git

diff --git a/tcl/target/imx27.cfg b/tcl/target/imx27.cfg
index b4dc8a986c..4a93a67537 100644
--- a/tcl/target/imx27.cfg
+++ b/tcl/target/imx27.cfg
@@ -6,20 +6,20 @@
 # failing, etc.
 reset_config trst_and_srst srst_pulls_trst
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME imx27
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
 
-# Note above there are 2 taps 
+# Note above there are 2 taps
 
 # The bs tap
 if { [info exists BSTAPID ] } {
@@ -38,9 +38,11 @@ if { [info exists CPUTAPID ] } {
 jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 # Create the GDB Target.
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
-$_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 -work-area-size  0x8000 -work-area-backup 1
+# REVISIT what operating environment sets up this virtual address mapping?
+$_TARGETNAME configure -work-area-virt 0xffff4c00 -work-area-phys 0xffff4c00 \
+	-work-area-size  0x8000 -work-area-backup 1
 # Internal to the chip, there is 45K of SRAM
 #