X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fimx35.cfg;h=21495c23ccfa7e7fba28f46206e2a5a8b2f853bc;hb=f91390f538f22678a790f77320ec78cce76b0ebb;hp=32748c5c6fab808641307a5dd80b8348782c8316;hpb=f8cd850c4d64d67eb19287449dcc8a515ce0e0b8;p=openocd.git

diff --git a/tcl/target/imx35.cfg b/tcl/target/imx35.cfg
index 32748c5c6f..21495c23cc 100644
--- a/tcl/target/imx35.cfg
+++ b/tcl/target/imx35.cfg
@@ -2,42 +2,41 @@
 #
 
 reset_config trst_and_srst srst_gates_jtag
+jtag_ntrst_delay 100
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME imx35
+   set _CHIPNAME imx35
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x07b3601d
 }
 
-if { [info exists SDMATAPID ] } {
+if { [info exists SDMATAPID] } {
    set _SDMATAPID $SDMATAPID
 } else {
    set _SDMATAPID 0x0882601d
 }
 
-#========================================
-# The "system jtag controller"
-# IMX31 reference manual, page 6-28 - figure 6-14
-if { [info exists SJCTAPID ] } {
-   set _SJCTAPID $SJCTAPID
+if { [info exists ETBTAPID] } {
+   set _ETBTAPID $ETBTAPID
 } else {
-   set _SJCTAPID 0x2b900f0f
+   set _ETBTAPID 0x2b900f0f
 }
 
-jtag newtap $_CHIPNAME sjc -irlen 4 -ircapture 0x0 -irmask 0x0 -expected-id $_SJCTAPID
+#========================================
 
+jtag newtap $_CHIPNAME etb -irlen 4 -irmask 0xf -expected-id $_ETBTAPID
 jtag newtap $_CHIPNAME cpu -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_CPUTAPID
 
 # No IDCODE for this TAP
@@ -48,5 +47,9 @@ jtag newtap $_CHIPNAME smda -irlen 5 -ircapture 0x1 -irmask 0x1f -expected-id $_
 set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
 
-proc power_restore {} { puts "Sensed power restore. No action." }
-proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." }
+proc power_restore {} { echo "Sensed power restore. No action." }
+proc srst_deasserted {} { echo "Sensed nSRST deasserted. No action." }
+
+# trace setup ... NOTE, "normal full" mode fudges the real ETMv3.1 mode
+etm config $_TARGETNAME 16 normal full etb
+etb config $_TARGETNAME $_CHIPNAME.etb