X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fis5114.cfg;h=31f1aa1aa0b66f6d5c01056e1a242568e36f2608;hb=dd60dd84f28deb9dd485384466c4417b527ac3b2;hp=56b9b65249a3cd8691a3dd8934e96cfc4dd7dca1;hpb=abfd4b19a6b1c1e257aed343af5ab71709f41bcb;p=openocd.git

diff --git a/tcl/target/is5114.cfg b/tcl/target/is5114.cfg
index 56b9b65249..31f1aa1aa0 100644
--- a/tcl/target/is5114.cfg
+++ b/tcl/target/is5114.cfg
@@ -3,19 +3,19 @@
 # ATMEL sold his product line to Insilica...
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME is5114
+   set _CHIPNAME is5114
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
   # this defaults to a little endian
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    # Force an error until we get a good number.
@@ -23,7 +23,7 @@ if { [info exists CPUTAPID ] } {
 }
 
 # jtag speed. We need to stick to 16kHz until we've finished reset.
-jtag_rclk 16
+adapter_khz 16
 
 reset_config trst_and_srst
 
@@ -36,11 +36,11 @@ jtag newtap $_CHIPNAME unknown2 -irlen 5 -ircapture 1 -irmask 1
 
 #arm946e-s and
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm966e -endian $_ENDIAN  -chain-position $_TARGETNAME  -variant arm966e
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
 
-$_TARGETNAME configure -event reset-start { jtag_rclk 16 }
+$_TARGETNAME configure -event reset-start { adapter_khz 16 }
 $_TARGETNAME configure -event reset-init {
 	# We can increase speed now that we know the target is halted.
-	jtag_rclk 3000
+	adapter_khz 3000
 }
 $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 1