X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Flm3s1968.cfg;h=3f0cdfcfd61da5ddbc2a4bb5b340319d8b157c92;hb=40f361dd944803e500169337fffe7713842fd632;hp=eebdcdc4b567c77a37ce00a1031583938a1301c6;hpb=2a0e491d9aec5fee9c1693f32a5174c7e1459faa;p=openocd.git

diff --git a/tcl/target/lm3s1968.cfg b/tcl/target/lm3s1968.cfg
index eebdcdc4b5..3f0cdfcfd6 100644
--- a/tcl/target/lm3s1968.cfg
+++ b/tcl/target/lm3s1968.cfg
@@ -6,13 +6,6 @@ if { [info exists CHIPNAME] } {
    set  _CHIPNAME lm3s1968
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-  # this defaults to a little endian
-   set  _ENDIAN little
-}
-
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
@@ -26,10 +19,10 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUT
 # this stops the debug registers from being cleared
 # this will be fixed in later revisions of silicon
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME -variant lm3s
+target create $_TARGETNAME cortex_m3 -chain-position $_CHIPNAME.cpu -variant lm3s
 
-# 4k working area at base of ram
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x4000 -work-area-backup 0
+# 8k working area at base of ram, not backed up
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000
 
 #flash configuration
-flash bank stellaris 0 0 0 0 0
+flash bank stellaris 0 0 0 0 $_TARGETNAME