X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Flpc17xx.cfg;h=c81971f93e615b05ed73e4401f32122e709be20c;hb=refs%2Fchanges%2F42%2F1542%2F19;hp=a64783dab2e75edb6119b5552eb7a8dc5785be71;hpb=2ce4e31bbcfabc06b7ac71d2e507e707d293c5c0;p=openocd.git

diff --git a/tcl/target/lpc17xx.cfg b/tcl/target/lpc17xx.cfg
index a64783dab2..c81971f93e 100644
--- a/tcl/target/lpc17xx.cfg
+++ b/tcl/target/lpc17xx.cfg
@@ -49,15 +49,11 @@ if { [info exists CPUROMSIZE] } {
 	error "_CPUROMSIZE not set. Please do not include lpc17xx.cfg directly, but the specific chip configuration file (lpc1751.cfg, lpc1764.cfg, etc)."
 }
 
-#delays on reset lines
-adapter_nsrst_delay 200
-jtag_ntrst_delay 200
-
 #jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
 swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m3 -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
 
 # The LPC17xx devices have 8/16/32kB of SRAM In the ARMv7-M "Code" area (at 0x10000000)
 $_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_CPURAMSIZE
@@ -74,6 +70,12 @@ flash bank $_FLASHNAME lpc2000 0x0 $_CPUROMSIZE 0 0 $_TARGETNAME \
 # we have no idea what clock the target is running at.
 adapter_khz 10
 
+# delays on reset lines
+adapter_nsrst_delay 200
+if {$using_jtag} {
+ jtag_ntrst_delay 200
+}
+
 $_TARGETNAME configure -event reset-init {
 	# Do not remap 0x0000-0x0020 to anything but the flash (i.e. select
 	# "User Flash Mode" where interrupt vectors are _not_ remapped,
@@ -94,4 +96,4 @@ $_TARGETNAME configure -event reset-init {
 
 # if srst is not fitted use VECTRESET to
 # perform a soft reset - SYSRESETREQ is not supported
-cortex_m3 reset_config vectreset
+cortex_m reset_config vectreset