X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fomap5912.cfg;h=c4ff40e233f79d8299b624f59dfc815c77d9c7a7;hb=f7394049d3a6a932003edf5fa35d10fe8bc17352;hp=2942ad743f2080d65d458659697dd042d5c1f29d;hpb=dbbc9c41f7db210b0a4e226540a28e0a8a5019bf;p=openocd.git

diff --git a/tcl/target/omap5912.cfg b/tcl/target/omap5912.cfg
index 2942ad743f..c4ff40e233 100644
--- a/tcl/target/omap5912.cfg
+++ b/tcl/target/omap5912.cfg
@@ -1,38 +1,33 @@
-#TI OMAP5912 dual core processor - http://www.ti.com 
-#on a OMAP5912 OSK board http://www.spectrumdigital.com.
+# TI OMAP5912 dual core processor
+# http://focus.ti.com/docs/prod/folders/print/omap5912.html
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME omap5912
-}
-
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-  # this defaults to a bigendian
-   set  _ENDIAN little
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME omap5912
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
-   set _CPUTAPID 0xffffffff
+   # NOTE: validated with XOMAP5912 part
+   set _CPUTAPID 0x0692602f
 }
 
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst
+adapter_nsrst_delay 100
+
+# NOTE: presumes irlen 38 is the C55x DSP, matching BSDL for
+# its standalone siblings (like TMS320VC5502) of the same era
 
 #jtag scan chain
-jtag newtap $_CHIPNAME unknown1 -irlen 38 -ircapture 0x0 -irmask 0x0 
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0 -expected-id $_CPUTAPID
-jtag newtap $_CHIPNAME unknown2 irlen 8 -ircapture  0x0 -irmask 0x0 
+jtag newtap $_CHIPNAME dsp -irlen 38 -expected-id 0x03df1d81
+jtag newtap $_CHIPNAME arm -irlen 4 -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME unknown -irlen 8
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+set _TARGETNAME $_CHIPNAME.arm
+target create $_TARGETNAME arm926ejs -chain-position $_TARGETNAME
 
-$_TARGETNAME configure -event reset-init {
+proc omap5912_reset {} {
 	#
 	# halt target
 	#
@@ -50,14 +45,8 @@ $_TARGETNAME configure -event reset-init {
 	sleep 500
 	mww 0xfffeb048 0x00005555
 	sleep 500
-	#
-	# detect flash
-	#
-	flash probe 0
 }
 
 # omap5912 lcd frame buffer as working area
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x3e800 -work-area-backup 0
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank cfi 0x00000000 0x1000000 2 2 0
+$_TARGETNAME configure -work-area-phys 0x20000000 \
+	-work-area-size 0x3e800 -work-area-backup 0