X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fsam7se512.cfg;fp=tcl%2Ftarget%2Fsam7se512.cfg;h=6f0aa38c09f21756bcf701e12f6a8a9c9597130b;hb=dbbc9c41f7db210b0a4e226540a28e0a8a5019bf;hp=0000000000000000000000000000000000000000;hpb=140d6c8e7948710a764965075bfaa700efd09802;p=openocd.git

diff --git a/tcl/target/sam7se512.cfg b/tcl/target/sam7se512.cfg
new file mode 100644
index 0000000000..6f0aa38c09
--- /dev/null
+++ b/tcl/target/sam7se512.cfg
@@ -0,0 +1,39 @@
+
+# ATMEL sam7se512 
+# Example: the "Elektor Internet Radio" - EIR
+# http://www.ethernut.de/en/hardware/eir/index.html
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME sam7se512
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0xffffffff
+}
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config srst_only srst_pulls_trst
+
+#jtag scan chain
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+# The target
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00200000 -work-area-size 0x4000 -work-area-backup 0
+
+#flash bank <driver> <base_addr> <size> <chip_width> <bus_width> <target_number> [<target_name> <banks> <sectors_per_bank> <pages_per_sector> <page_size> <num_nvmbits> <ext_freq_khz>]
+flash bank at91sam7 0 0 0 0 0 0 0 0 0 0 0 0 18432
+