X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fstellaris_icdi.cfg;h=f856a7a8d83f22fc19e91d44d552c69b356754b2;hb=d3c2679bcb8e8ba25e7b6e443b39f57474afc099;hp=11d57c26a0f2836334e9fdf73f90f7dad52ea4a2;hpb=adb8ec32dc7439aa3e34ab19f026e390ec129c10;p=openocd.git

diff --git a/tcl/target/stellaris_icdi.cfg b/tcl/target/stellaris_icdi.cfg
index 11d57c26a0..f856a7a8d8 100644
--- a/tcl/target/stellaris_icdi.cfg
+++ b/tcl/target/stellaris_icdi.cfg
@@ -1,34 +1,2 @@
-#
-# lm3s icdi pseudo target
-#
-
-if { [info exists CHIPNAME] } {
-   set _CHIPNAME $CHIPNAME
-} else {
-   set _CHIPNAME lm3s
-}
-
-# Work-area is a space in RAM used for flash programming
-# By default use 16kB
-if { [info exists WORKAREASIZE] } {
-   set _WORKAREASIZE $WORKAREASIZE
-} else {
-   set _WORKAREASIZE 0x4000
-}
-
-#
-# possible value are hla_jtag
-# currently swd is not supported
-#
-transport select hla_jtag
-
-# do not check id as icdi currently does not support it
-hla newtap $_CHIPNAME cpu -expected-id 0
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME hla_target -chain-position $_TARGETNAME
-
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
-
-# flash configuration ... autodetects sizes, autoprobed
-flash bank $_CHIPNAME.flash stellaris 0 0 0 0 $_TARGETNAME
+echo "WARNING: target/stellaris_icdi.cfg is deprecated, please switch to target/stellaris.cfg"
+source [find target/stellaris.cfg]