X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fstm32f0x.cfg;h=baac9b68d1e84f546083b3aad35e6e3b1c3f5b64;hb=11a2bfc2bcedfad0ecb1b8d7f68ac7208cd6b8c0;hp=b8c0de94cfedb79546f470d576145d2245c6a434;hpb=2231da8ec4e7d7ae9b652f3dd1a7104f5a110f3f;p=openocd.git

diff --git a/tcl/target/stm32f0x.cfg b/tcl/target/stm32f0x.cfg
index b8c0de94cf..baac9b68d1 100644
--- a/tcl/target/stm32f0x.cfg
+++ b/tcl/target/stm32f0x.cfg
@@ -22,6 +22,14 @@ if { [info exists WORKAREASIZE] } {
    set _WORKAREASIZE 0x1000
 }
 
+# Allow overriding the Flash bank size
+if { [info exists FLASH_SIZE] } {
+	set _FLASH_SIZE $FLASH_SIZE
+} else {
+	# autodetect size
+	set _FLASH_SIZE 0
+}
+
 #jtag scan chain
 if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
@@ -41,7 +49,7 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 
 # flash size will be probed
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME stm32f1x 0x08000000 0 0 0 $_TARGETNAME
+flash bank $_FLASHNAME stm32f1x 0x08000000 $_FLASH_SIZE 0 0 $_TARGETNAME
 
 # adapter speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
 adapter_khz 1000