X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Fti_dm6446.cfg;h=fa1e6e957c316cb74552198aa9daacee9fcc5153;hb=a1bbf4b75bc68aeed3c72e37b302bb36757401c2;hp=4f100843b18a32957a92f2b0b1d012d9c42008df;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3;p=openocd.git

diff --git a/tcl/target/ti_dm6446.cfg b/tcl/target/ti_dm6446.cfg
index 4f100843b1..fa1e6e957c 100644
--- a/tcl/target/ti_dm6446.cfg
+++ b/tcl/target/ti_dm6446.cfg
@@ -70,8 +70,8 @@ $_TARGETNAME configure -work-area-phys 0x0000a000 -work-area-size 0x2000
 # be absolutely certain the JTAG clock will work with the worst-case
 # CLKIN = 20 MHz (best case: 30 MHz) even when no bootloader turns
 # on the PLL and starts using it.  OK to speed up after clock setup.
-jtag_rclk 1500
-$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 }
+adapter_khz 1500
+$_TARGETNAME configure -event "reset-start" { adapter_khz 1500 }
 
 arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable