X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=tcl%2Ftarget%2Ftmpa910.cfg;h=5d41c8c2ad7076c26809dd69fceba15bc3b3ead7;hb=3427cf2b7e33240fc63c6398090dc7bcbf4f2d52;hp=3ed3253b165be1ab6f4202ded15f9b881ab92701;hpb=43b38078787fd4f0753bdc3b150300d34678618a;p=openocd.git

diff --git a/tcl/target/tmpa910.cfg b/tcl/target/tmpa910.cfg
index 3ed3253b16..5d41c8c2ad 100644
--- a/tcl/target/tmpa910.cfg
+++ b/tcl/target/tmpa910.cfg
@@ -2,22 +2,18 @@
 # Target:    Toshiba TMPA910
 ######################################
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME tmpa910
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME tmpa910
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
-}
+# Toshiba TMPA910 series MCUs are always little endian as per datasheet.
+set _ENDIAN little
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
    set _CPUTAPID 0x07926031
 }
 
@@ -32,25 +28,20 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst
-jtag_nsrst_delay 20
+adapter_nsrst_delay 20
 jtag_ntrst_delay 20
 
 ######################
 # Target configuration
 ######################
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
-# built-in RAM0
-#working_area 0 0xf8004000 0x4000 nobackup
-# built-in RAM1
-#working_area 1 0xf8008000 0x4000 nobackup
-# built-in RAM2
-#working_area 2 0xf800c000 0x4000 nobackup
-# built-in RAM 0-2 48k total
-#working_area 0 0xf8004000 0xc000 nobackup
+# Internal RAM-0 (16kB): 0xf8004000
+# Internal RAM-1 (16kB): 0xf8008000
+# Internal RAM-2 (16kB): 0xf800c000
 
-# Internal sram1 memory
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0xf8004000 -work-area-size 0xc000 \
+# Use internal RAM-0, RAM-1, and RAM-2 as working area (48kB total).
+$_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0xc000 \
 -work-area-backup 0