add a line that checks the returned value of set signals function
add two VIDs of other original boards (have onboard angie architecture)
so angie driver can connect to them and change their VID after
renumeration.
Change-Id: Ide4f1f6f38168a410191bf3ff75bcd59dcf7ef50
Signed-off-by: Ahmed BOUDJELIDA <aboudjelida@nanoxplore.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7795
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
# ANGIE USB-JTAG Adapter
ATTRS{idVendor}=="584e", ATTRS{idProduct}=="424e", MODE="660", GROUP="plugdev", TAG+="uaccess"
# ANGIE USB-JTAG Adapter
ATTRS{idVendor}=="584e", ATTRS{idProduct}=="424e", MODE="660", GROUP="plugdev", TAG+="uaccess"
+ATTRS{idVendor}=="584e", ATTRS{idProduct}=="4255", MODE="660", GROUP="plugdev", TAG+="uaccess"
+ATTRS{idVendor}=="584e", ATTRS{idProduct}=="4355", MODE="660", GROUP="plugdev", TAG+="uaccess"
ATTRS{idVendor}=="584e", ATTRS{idProduct}=="4a55", MODE="660", GROUP="plugdev", TAG+="uaccess"
# Marvell Sheevaplug
ATTRS{idVendor}=="584e", ATTRS{idProduct}=="4a55", MODE="660", GROUP="plugdev", TAG+="uaccess"
# Marvell Sheevaplug
/** USB Product ID of ANGIE device in unconfigured state (no firmware loaded
* yet) or with its firmware. */
/** USB Product ID of ANGIE device in unconfigured state (no firmware loaded
* yet) or with its firmware. */
-#define ANGIE_PID 0x424e
-#define ANGIE_PID_2 0x4a55
+#define ANGIE_PID 0x424e
+#define ANGIE_PID_2 0x4255
+#define ANGIE_PID_3 0x4355
+#define ANGIE_PID_4 0x4a55
/** Address of EZ-USB ANGIE CPU Control & Status register. This register can be
* written by issuing a Control EP0 vendor request. */
/** Address of EZ-USB ANGIE CPU Control & Status register. This register can be
* written by issuing a Control EP0 vendor request. */
static int angie_usb_open(struct angie *device)
{
struct libusb_device_handle *usb_device_handle;
static int angie_usb_open(struct angie *device)
{
struct libusb_device_handle *usb_device_handle;
- const uint16_t vids[] = {ANGIE_VID, ANGIE_VID, 0};
- const uint16_t pids[] = {ANGIE_PID, ANGIE_PID_2, 0};
+ const uint16_t vids[] = {ANGIE_VID, ANGIE_VID, ANGIE_VID, ANGIE_VID, 0};
+ const uint16_t pids[] = {ANGIE_PID, ANGIE_PID_2, ANGIE_PID_3, ANGIE_PID_4, 0};
int ret = jtag_libusb_open(vids, pids, &usb_device_handle, NULL);
int ret = jtag_libusb_open(vids, pids, &usb_device_handle, NULL);
high |= SIGNAL_SRST;
int ret = angie_append_set_signals_cmd(device, low, high);
high |= SIGNAL_SRST;
int ret = angie_append_set_signals_cmd(device, low, high);
+ if (ret == ERROR_OK)
+ angie_clear_queue(device);
ret = angie_execute_queued_commands(device, LIBUSB_TIMEOUT_MS);
if (ret == ERROR_OK)
ret = angie_execute_queued_commands(device, LIBUSB_TIMEOUT_MS);
if (ret == ERROR_OK)
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)