if ((stmqspi_info->saved_cr & (BIT(SPI_DUAL_FLASH) | BIT(SPI_FSEL_FLASH)))
!= BIT(SPI_FSEL_FLASH))
if ((status & (SPIFLASH_WE_BIT | SPIFLASH_BSY_BIT)) != SPIFLASH_WE_BIT) {
- LOG_ERROR("Cannot write enable flash1. Status=0x%02" PRIx8,
- status & 0xFF);
+ LOG_ERROR("Cannot write enable flash1. Status=0x%02x",
+ status & 0xFFU);
return ERROR_FLASH_OPERATION_FAILED;
}
status >>= 8;
if ((stmqspi_info->saved_cr & (BIT(SPI_DUAL_FLASH) | BIT(SPI_FSEL_FLASH))) != 0)
if ((status & (SPIFLASH_WE_BIT | SPIFLASH_BSY_BIT)) != SPIFLASH_WE_BIT) {
- LOG_ERROR("Cannot write enable flash2. Status=0x%02" PRIx8,
- status & 0xFF);
+ LOG_ERROR("Cannot write enable flash2. Status=0x%02x",
+ status & 0xFFU);
return ERROR_FLASH_OPERATION_FAILED;
}
if (((stmqspi_info->saved_cr & (BIT(SPI_DUAL_FLASH) | BIT(SPI_FSEL_FLASH)))
!= BIT(SPI_FSEL_FLASH)) && ((status & SPIFLASH_BSY_BIT) == 0) &&
((status & SPIFLASH_WE_BIT) != 0)) {
- LOG_ERROR("Mass erase command not accepted by flash1. Status=0x%02" PRIx8,
- status & 0xFF);
+ LOG_ERROR("Mass erase command not accepted by flash1. Status=0x%02x",
+ status & 0xFFU);
retval = ERROR_FLASH_OPERATION_FAILED;
goto err;
}
if (((stmqspi_info->saved_cr & (BIT(SPI_DUAL_FLASH) | BIT(SPI_FSEL_FLASH))) != 0) &&
((status & SPIFLASH_BSY_BIT) == 0) &&
((status & SPIFLASH_WE_BIT) != 0)) {
- LOG_ERROR("Mass erase command not accepted by flash2. Status=0x%02" PRIx8,
- status & 0xFF);
+ LOG_ERROR("Mass erase command not accepted by flash2. Status=0x%02x",
+ status & 0xFFU);
retval = ERROR_FLASH_OPERATION_FAILED;
goto err;
}
if (((stmqspi_info->saved_cr & (BIT(SPI_DUAL_FLASH) | BIT(SPI_FSEL_FLASH)))
!= BIT(SPI_FSEL_FLASH)) && ((status & SPIFLASH_BSY_BIT) == 0) &&
((status & SPIFLASH_WE_BIT) != 0)) {
- LOG_ERROR("Sector erase command not accepted by flash1. Status=0x%02" PRIx8,
- status & 0xFF);
+ LOG_ERROR("Sector erase command not accepted by flash1. Status=0x%02x",
+ status & 0xFFU);
retval = ERROR_FLASH_OPERATION_FAILED;
goto err;
}
if (((stmqspi_info->saved_cr & (BIT(SPI_DUAL_FLASH) | BIT(SPI_FSEL_FLASH))) != 0) &&
((status & SPIFLASH_BSY_BIT) == 0) &&
((status & SPIFLASH_WE_BIT) != 0)) {
- LOG_ERROR("Sector erase command not accepted by flash2. Status=0x%02" PRIx8,
- status & 0xFF);
+ LOG_ERROR("Sector erase command not accepted by flash2. Status=0x%02x",
+ status & 0xFFU);
retval = ERROR_FLASH_OPERATION_FAILED;
goto err;
}
/* we need le_32_to_h, but that's the same as h_to_le_32 */
result = h_to_le_32(erase_check_info.result);
bank->sectors[sector + index].is_erased = ((result & 0xFF) == 0xFF);
- LOG_DEBUG("Flash sector %u checked: 0x%04" PRIx16, sector + index, result & 0xFFFF);
+ LOG_DEBUG("Flash sector %u checked: 0x%04x", sector + index, result & 0xFFFFU);
}
keep_alive();
sector += count;