From: Freddie Chopin <freddie.chopin@gmail.com>
Date: Thu, 21 Jan 2016 10:19:41 +0000 (+0100)
Subject: Add board config for ST NUCLEO L476RG board
X-Git-Tag: v0.10.0-rc1~263
X-Git-Url: https://review.openocd.org/gitweb?a=commitdiff_plain;h=50d4f76e13674190f1ab730f5718b8c4c0f8ca41;p=openocd.git

Add board config for ST NUCLEO L476RG board

The file was contributed by Sébastien Lorquet.

Change-Id: I118f5b16181488b9e3327891e6130b908419f1c4
Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>
Reviewed-on: http://openocd.zylin.com/3214
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
---

diff --git a/tcl/board/st_nucleo_l476rg.cfg b/tcl/board/st_nucleo_l476rg.cfg
new file mode 100644
index 0000000000..2baa34e76c
--- /dev/null
+++ b/tcl/board/st_nucleo_l476rg.cfg
@@ -0,0 +1,12 @@
+# This is a ST NUCLEO L476RG board with a single STM32L476RGT6 chip.
+# http://www.st.com/web/catalog/tools/FM116/SC959/SS1532/LN1847/PF261636
+
+source [find interface/stlink-v2-1.cfg]
+
+transport select hla_swd
+
+source [find target/stm32l4x.cfg]
+
+# use hardware reset
+reset_config srst_only srst_nogate
+