zwelch [Mon, 1 Jun 2009 23:09:19 +0000 (23:09 +0000)]
David Brownell <david-b@pacbell.net>:
Remove two sections about deprecated/removed commands, documenting
them briefly in the chapter on deprecated/removed commands. The
"working_area" command just duplicated text; "jtag_device" wasn't
listed in that chapter before.
Also start de-emphasizing those commands. Don't index them, and
include a disclaimer that their documentation may start to vanish
about a year after the code does (e.g. in January 2010).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1986
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Mon, 1 Jun 2009 23:06:17 +0000 (23:06 +0000)]
David Brownell <david-b@pacbell.net>:
This is the missing half of the r1974 patch:
OSK5912 board support, which was split out from
the omap5912 target config.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1985
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Mon, 1 Jun 2009 23:01:24 +0000 (23:01 +0000)]
Encapsulate JTAG Cable API and interface structure, plan for new header file.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1984
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Mon, 1 Jun 2009 22:54:42 +0000 (22:54 +0000)]
Encapsulate JTAG minidriver functions, plan for new header file.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1983
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Mon, 1 Jun 2009 21:54:35 +0000 (21:54 +0000)]
Remove unused in_handler_t type definition from jtag.h
git-svn-id: svn://svn.berlios.de/openocd/trunk@1982
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Mon, 1 Jun 2009 21:53:19 +0000 (21:53 +0000)]
Scrub final vestiges of in_handler from mips target APIs.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1981
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 1 Jun 2009 19:58:20 +0000 (19:58 +0000)]
added jtag_add_statemove() helper fn(actual fn written by Dick Hollonbeck, I just moved it).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1980
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 1 Jun 2009 19:06:11 +0000 (19:06 +0000)]
fix warning for a variable that GCC thought might be uninitialized(which it can't be).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1979
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Mon, 1 Jun 2009 19:00:54 +0000 (19:00 +0000)]
simon qian <simonqian.openocd@gmail.com> stop incestious communication with lower jtag.c layers
git-svn-id: svn://svn.berlios.de/openocd/trunk@1978
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Mon, 1 Jun 2009 03:06:46 +0000 (03:06 +0000)]
David Brownell <david-b@pacbell.net>:
Uplevel the arch commands to be a chapter; they really
don't fit in the "general commands" category.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1977
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Mon, 1 Jun 2009 03:06:25 +0000 (03:06 +0000)]
David Brownell <david-b@pacbell.net>:
Fix minor goofage in previous doc updates:
* The ETM dummy driver name is "dummy" not "etm_dummy";
re-alphabetize.
* DCC trace message mode "charmsg" is a format type
(and what Linux needs)
git-svn-id: svn://svn.berlios.de/openocd/trunk@1976
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Mon, 1 Jun 2009 03:06:11 +0000 (03:06 +0000)]
David Brownell <david-b@pacbell.net>:
Various updates, mostly small/formatting changes:
* Small content tweaks:
- Re-title: "OpenOCD User's Guide".
- For users, URLS for latest doc and SparkFun forum
- Mention GIT-SVN
* Fix some front-matter goofage, matching texinfo docs:
- "paragraphintent" location matters
- put release version/date description with the copyright
* Fix some other stuff matching texinfo docs:
- no tabs
- tweak some refs and anchors
* whitespace-at-end-o-line fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@1975
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Mon, 1 Jun 2009 03:05:59 +0000 (03:05 +0000)]
David Brownell <david-b@pacbell.net>:
Split out OSK5912 board support from the omap5912 target config, and make
it pass sanity checks on my (Rev C/original) hardware:
- Fix syntax error ("-irlen" not "irlen")
- Provide real TAP ids for the ARM926ejs and the C55x dsp
- Label both CPUs appropriately (DSP, ARM)
- List both flash chips
The scan chain looks like this (note truncated DSP instruction code):
TapName | Enabled | IdCode Expected IrLen IrCap IrMask Instr
---|--------------------|---------|------------|------------|------|------|------|---------
0 | omap5912.dsp | Y | 0x03df1d81 | 0x03df1d81 | 0x26 | 0x00 | 0x00 | 0xffffffff
1 | omap5912.arm | Y | 0x0692602f | 0x0692602f | 0x04 | 0x01 | 0x00 | 0x0c
2 | omap5912.unknown | Y | 0x00000000 | 0x00000000 | 0x08 | 0x00 | 0x00 | 0xff
I still don't know what that third TAP is; maybe an early version of
an ICEpick JTAG router.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1974
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Mon, 1 Jun 2009 03:05:42 +0000 (03:05 +0000)]
David Brownell <david-b@pacbell.net>:
Whitespace fixes.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1973
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Mon, 1 Jun 2009 03:05:26 +0000 (03:05 +0000)]
David Brownell <david-b@pacbell.net>:
Remove broken whitespace ... mostly at end of line, but
also in some cases blocks of inappropriate empty lines.
And spell "comamnd" right. :)
git-svn-id: svn://svn.berlios.de/openocd/trunk@1972
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 12:38:28 +0000 (12:38 +0000)]
Final step in isolating target_type_s structure:
- Move definition of 'struct target_type_s' into new 'target_type.h' file.
- Forward delclaration remains in target.h, with comment pointing to new file.
- Replaces #define with #include in source files.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1971
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 12:10:57 +0000 (12:10 +0000)]
Whitespace-only updates to automake input files:
- use continuations to break long lines of variable assignments
- makes these variables more patch-friendly and conform to style guide
git-svn-id: svn://svn.berlios.de/openocd/trunk@1970
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 11:32:28 +0000 (11:32 +0000)]
First step in hiding target_type_s from public interface:
- Add DEFINE_TARGET_TYPE_S symbol in files that need it defined.
- Forward declare 'struct target_type_s' only, unless that symbol is defined.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1969
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 11:32:10 +0000 (11:32 +0000)]
Add target_examine_one wrapper:
- replaces all calls to target->type->examine.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1968
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 11:31:52 +0000 (11:31 +0000)]
Add target breakpoint and watchpoint wrapper:
- replaces all calls to target->type->{add,remove}_{break,watch}point.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1967
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 11:31:27 +0000 (11:31 +0000)]
Add target_get_name wrapper:
- replaces all accesses to target->type->name.
- add documentation in target_s to warn not to access field directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1966
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 11:31:11 +0000 (11:31 +0000)]
Add target_step wrapper:
- replaces all calls to target->type->step.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1965
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 11:30:59 +0000 (11:30 +0000)]
Add target_get_gdb_reg_list wrapper:
- replaces all calls to target->type->get_gdb_reg_list.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1964
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 09:39:04 +0000 (09:39 +0000)]
Add target_bulk_write_memory wrapper:
- replaces all calls to target->type->bulk_write_memory.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1963
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 09:38:43 +0000 (09:38 +0000)]
Add wrappers for target->type->examined:
- replace all checks of target->type->examined with target_was_examined().
- replace all setting of target->type->examined with target_set_examined().
- replace clearing of target->type->examined with target_reset_examined().
- add documentation in target_s to warn not to access field directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1962
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 09:38:20 +0000 (09:38 +0000)]
Add target_run_algorithm wrapper:
- replaces all calls to target->type->run_algorithm.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1961
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 09:37:57 +0000 (09:37 +0000)]
Add target_write_memory wrapper:
- replaces all calls to target->type->write_memory.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1960
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 09:37:35 +0000 (09:37 +0000)]
Add target_read_memory wrapper:
- replaces all calls to target->type->read_memory.
- add documentation in target_s to warn not to invoke callback directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1959
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 06:00:28 +0000 (06:00 +0000)]
Simplify the handle_md_command routine in target.c:
- fix buffer overrun in mdw; final '\0' would overflow the output buffer.
- return ERROR_COMMAND_SYNTAX_ERROR instead of ERROR_OK if:
- less than one argument is provided
- the command is called with a name other than mdb, mdh, or mdw.
- factor all command output into new handle_md_output function
git-svn-id: svn://svn.berlios.de/openocd/trunk@1958
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 04:58:51 +0000 (04:58 +0000)]
Make nvp_target_event static; remove its external declaration.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1957
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 02:18:26 +0000 (02:18 +0000)]
Make target_buffer_get_uXX interfaces work with constant buffers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1956
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 01:07:43 +0000 (01:07 +0000)]
Peter Denison <openwrt@marshadder.org>:
The debugging code in jlink_tap_execute() called when _DEBUG_USB_COMMS_ is
defined was using the entire cached scan length to print the results
buffers, and not the correct length of each individual buffer.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1955
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 31 May 2009 00:49:03 +0000 (00:49 +0000)]
Add new JTAG boundary scan primer, with links to BSDL information.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1954
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 30 May 2009 23:57:30 +0000 (23:57 +0000)]
Eliminate duplicated code in the handle_mw_command memory write loop.
- wordsize will always be 1, 2, or 4 due to preceeding switch statement.
- move call to keep_alive after successful writes, not upon failures
git-svn-id: svn://svn.berlios.de/openocd/trunk@1953
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 30 May 2009 22:23:12 +0000 (22:23 +0000)]
Encapsulate the global "jtag" jtag_interface pointer:
- Add jtag_interface_quit, factored from exit_handler() in openocd.c.
- Remove its extern declaration.
- Add static keyword to its definition.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1952
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 30 May 2009 21:53:10 +0000 (21:53 +0000)]
Remove unused jlink_execute_end_state (unreferenced after r1949).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1951
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sat, 30 May 2009 11:55:14 +0000 (11:55 +0000)]
remove unused JTAG_END_STATE part 2
git-svn-id: svn://svn.berlios.de/openocd/trunk@1950
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sat, 30 May 2009 11:37:21 +0000 (11:37 +0000)]
remove unused JTAG_END_STATE
git-svn-id: svn://svn.berlios.de/openocd/trunk@1949
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sat, 30 May 2009 07:56:14 +0000 (07:56 +0000)]
added some comments on meminfo command
git-svn-id: svn://svn.berlios.de/openocd/trunk@1948
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Sat, 30 May 2009 07:53:40 +0000 (07:53 +0000)]
more reset_config texts
git-svn-id: svn://svn.berlios.de/openocd/trunk@1947
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 30 May 2009 01:44:22 +0000 (01:44 +0000)]
Remove trailing whitespace from oocd_trace source file.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1946
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 30 May 2009 01:43:21 +0000 (01:43 +0000)]
David Brownell <david-b@pacbell.net>:
Provide basic documentation on the ARM ETM and ETB trace commands.
Fix minor goofs in registration of the ETM commands; and whitespace
issues in the proof-of-concept oocd_trace code. (Plus include a
ref to Dominic's email saying that it's just proof-of-concept code.)
Note that I'm still not sure whether the ETM support works. But
documenting how it's expected to work should help sort out which
behaviors are bugs, which will help get bugs patched.
ZW: whitespace changes were split out of this patch but will follow.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1945
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 30 May 2009 01:32:19 +0000 (01:32 +0000)]
David Brownell <david-b@pacbell.net>:
Make it so the magic "reset_config" keywords can be provided in any
order. This eliminates needless error paths, and makes it easier
to define things at the right level (adapter, board, target).
It also includes two other behavioral changes:
(1) When "handle_reset_config" sees a parameter error, it
exits without changing anything. This is best viewed
as a bugfix. (Old behavior: restore defaults, even if
they weren't previously active.)
(2) Only the behaviors that were explicitly specified get
changed. (Old behavior: everything else gets reset to
the "default".) So for example you can now specify SRST
drive requirements without saying anything about the
three unrelated topics you previously had to specify.
That second one might cause confusion for any configs that end
up calling "reset_config" twice, so it will deserve to be called
out in the release notes. (There were no such configurations in
the current OpenOCD source tree.)
Update docs accordingly. Note that at least some versions of
the texi-to-html tools can't handle "@xref{with spaces}", but
those work properly in PDF and in the info files.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1944
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Fri, 29 May 2009 05:50:01 +0000 (05:50 +0000)]
Remove error_handler_t type definition; it was unused in the tree.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1943
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Fri, 29 May 2009 04:00:51 +0000 (04:00 +0000)]
Add documentation to flash.h:
- provides low-level information about each flash API interface,
- gives driver authors some documentation about the driver interface,
- updated extensively from the original patch provided by Duane Ellis.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1942
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Fri, 29 May 2009 01:33:04 +0000 (01:33 +0000)]
David Brownell <david-b@pacbell.net>:
Provide basic documentation for some of the other flash drivers.
avr ... looks incomplete, may work with one AVR8 microcontroller
ecosflash ... can't find docs
lpc288x ... an NXP part, driver seems lpc2888-specific
ocl ... some arm7/arm9 thing, can't find docs
pic32mx ... looks incomplete, for PIC32MX (MIPS 4K) devices
tms470 ... for TI TMS470 parts
Still seems to be mostly arm7tdmi... several of these have no
users in the current tree.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1941
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Thu, 28 May 2009 23:47:37 +0000 (23:47 +0000)]
Remove redundant call to autoheader in bootstrap script.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1940
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Thu, 28 May 2009 23:13:32 +0000 (23:13 +0000)]
David Brownell <david-b@pacbell.net>:
Start converting the architecture-specific commands to @deffn format,
reviewing against the code.
* armv4_5 disassemble ... now documented; although Jazelle code
is not handled
* It's "armv4_5 core_state" not "core_mode"; although Jazelle state
is not handled
* arm7/9 "debug" commands ... now with other arm7_9 commands, no
longer in a separate section
* arm926ejs cp15 ... previous description was broken, it matched
the code for arm920t instead
* Have separate subsections for ARMv4/ARMv5, ARMv6, and ARMv7; the
latter are new
* Move core-specific descriptions into sub-subsections under those
architectures; XScale and ARM11 descriptions are new
The new XScale and ARM11 command descriptions surely need elaboration
and review. ARM CP15 operation descriptions in general seem to be
confused and incomplete.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1939
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Thu, 28 May 2009 01:18:47 +0000 (01:18 +0000)]
David Brownell <david-b@pacbell.net>:
Continue updating the NOR flash coverage to use @deffn syntax, so the
commands have more consistent presentation and formatting. This
reorganizes information and updates its presentation, except where
the information didn't really match the code.
This patch updates the main commands, and finishes making the section
structure parallel the NAND presentation. Of note:
- The "flash fill[whb] addr value length" commands are now documented.
- The "flash bank" command is now presented much earlier
- Explicit mention is made that NOR flash should be read using just
standard memory access commands, like "mdw" and "dump_image".
git-svn-id: svn://svn.berlios.de/openocd/trunk@1938
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Thu, 28 May 2009 01:11:10 +0000 (01:11 +0000)]
David Brownell <david-b@pacbell.net>:
Start updating the NOR flash coverage to use @deffn syntax, so the
commands have more consistent presentation and formatting. This
reorganizes information and updates its presentation, except where
the information didn't really match the code.
This patch updates most of the driver specific support, creating one
new (and alphabetized!) section just for driver-specific data, where
previously that data was split over up to three sections. Of note:
- The at91sam7 docs were a bit out of date with respect to the code.
- The "str9xpec" stuff still deserves some work. For now, it sits
in its own subsection; pretty messy.
- Likewise the "mflash" stuff. That's a parallel infrastructure,
and is now in a section of its own.
- The "mass_erase" commands for the Cortex M3 chips got turned into
footnotes. IMO, they should vanish sometime; they're superfluous.
- There are still a bunch of undocumented NOR drivers. Examples:
avr(8), tms470, pic32mx, more.
Plus there are a handful of minor tweaks to the NAND docs (to help make
the NOR and NAND presentations be parallel); the "Command Index" has
been renamed as the "Command and Driver Index"; reference TI instead
of Luminary Micro in several places.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1937
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Thu, 28 May 2009 00:47:30 +0000 (00:47 +0000)]
David Brownell <david-b@pacbell.net>:
Fix a bunch of PDF generation bugs in the texi:
* The "overfull" warnings are basically complaints about lines
that are too long, so they ran off the right margin of the
PDF documentation and turn into a "black blot".
* The "underfull" warnings are basically complaints about lines
that look ugly when they get filled, because the tokens are
so long that the line-break algorithm can't do anything good.
In a few cases the simplest fix seemed to be to use more appropriate
texi commands.
In other cases the fix was a content bugfix: "ocd_" not "openocd_";
and many of those "target variants" actually aren't recognized.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1936
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 23:54:16 +0000 (23:54 +0000)]
Fix potentialyl unaligned memory accesses in mflash driver.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1935
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
kc8apf [Wed, 27 May 2009 21:03:51 +0000 (21:03 +0000)]
Author: Nicolas Pitre <nico@cam.org>
- cut out the "unknown EmbeddedICE version" message with Feroceon
git-svn-id: svn://svn.berlios.de/openocd/trunk@1934
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
kc8apf [Wed, 27 May 2009 20:30:17 +0000 (20:30 +0000)]
Author: Nicolas Pitre <nico@cam.org>
- Silence errors about keep_alive() not being called frequently enough unless
a gdb session is active or debugging is enabled
git-svn-id: svn://svn.berlios.de/openocd/trunk@1933
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 15:15:06 +0000 (15:15 +0000)]
Numerous minor updates and fixes for The Manual:
- Link Scripting Overview into the TCL Primer; both need more work.
- Remove redundant OpenOCD from Scripting Overview subpage title.
- Fix incorrect tag in Doxygen style guide example.
- Fix minor typo in first introductory paragraph of main page.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1932
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 12:34:02 +0000 (12:34 +0000)]
unsik Kim <donari75@gmail.com>:
Add large bank write/dump support in mflash driver.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1931
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 12:30:42 +0000 (12:30 +0000)]
unsik Kim <donari75@gmail.com>:
Add mflash configuration code, updating relevant documentation.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1930
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 12:21:28 +0000 (12:21 +0000)]
unsik Kim <donari75@gmail.com>:
Remove unused mflash driver 'prove' field.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1929
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 12:20:13 +0000 (12:20 +0000)]
unsik Kim <donari75@gmail.com>:
Remove unused mflash bank command options.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1928
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 12:16:07 +0000 (12:16 +0000)]
unsik Kim <donari75@gmail.com>:
Change prefix of mflash driver routines to mg_.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1927
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 12:06:51 +0000 (12:06 +0000)]
SimonQian <simonqian@SimonQian.com>:
This patch allows the vsllink to support very large scan sizes in DMA mode.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1926
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Wed, 27 May 2009 11:58:19 +0000 (11:58 +0000)]
- add support for cortino jtag interface
git-svn-id: svn://svn.berlios.de/openocd/trunk@1925
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 10:44:03 +0000 (10:44 +0000)]
Add new Style Guides for languages used (and to be used) by project.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1924
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 10:40:52 +0000 (10:40 +0000)]
Link new Primer pages into the main list of Primers.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1923
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 10:35:20 +0000 (10:35 +0000)]
Add Documentation Primer to The Manual.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1922
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 10:27:32 +0000 (10:27 +0000)]
Add draft of Autotools Primer to The Manual.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1921
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 07:49:58 +0000 (07:49 +0000)]
Update build system to find moved scripts -- Step 3 of 2:
- Update references from using PKGLIBDIR to PKGDATADIR.
- Update built-in script search paths to reflect new install location:
- $(pkgdatadir) => $(pktdatadir)/site
- $(pkglibdir) => $(pktdatadir)/scripts
- Update installed location of httpd files:
- $(pkglibdir)/httpd => $(pkgdatadir)/httpd
git-svn-id: svn://svn.berlios.de/openocd/trunk@1920
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 06:49:24 +0000 (06:49 +0000)]
Move TCL script files -- Step 2 of 2:
- Move src/tcl to tcl/.
- Update top Makefile.am to use new path name.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1919
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 06:44:43 +0000 (06:44 +0000)]
Move TCL script files -- Step 1 of 2:
- Move src/target/{interface,target,board,test}/ into src/tcl/
- Remove existing rules in src/Makefile.am and src/target/Makefile.am.
- Add Makefile.am handling of *.cfg and *.tcl files in top Makefile.am:
- Add dist-hook to include such files under src/tcl in the distribution.
- Add install-data-hook to install contents of '$(top_srcdir)/src/tcl/'.
- Add uninstall-hook to remove the installed script files.
- Change paths to (un)install script files in '$(pkgdatadir)/scripts'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1918
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Wed, 27 May 2009 02:01:15 +0000 (02:01 +0000)]
Add warning to generated Doxyfile to edit Doxyfile.in.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1917
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Tue, 26 May 2009 23:58:01 +0000 (23:58 +0000)]
Update Doxygen markup in PATCHES, BUGS, and TODO:
- In the File List, these files are listed and link to empty pages.
- This patch adds @file blocks to reference the pages each file contains.
- Remove redundant "OpenOCD" from PATCHES title; it clutters the tree view.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1916
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Tue, 26 May 2009 01:27:56 +0000 (01:27 +0000)]
SimonQian <simonqian@SimonQian.com>, reported by R.Doss:
This patch fixes a segfault when TDO was not received in XXR command:
- allocate space for the value and mask anyway
- clear the mask to zero to effectively skip the output comparison step
git-svn-id: svn://svn.berlios.de/openocd/trunk@1915
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Tue, 26 May 2009 01:22:23 +0000 (01:22 +0000)]
SimonQian <simonqian@SimonQian.com>:
Add svf_get_mask_u32 to generate a mask according to bitlen.
Fix this bug in other functions except for svf_check_tdo.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1914
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Tue, 26 May 2009 00:23:23 +0000 (00:23 +0000)]
David Brownell <david-b@pacbell.net>:
Update the "Reset Configuration" information in the User's guide:
- Convert to @deffn syntax
- Move tutorial text from command descriptions into new sections
- Describe several different types of JTAG-visible reset
- Expand descriptions of configuration tweaks for SRST and TRST
- Link to the "reset" command, and vice versa
- Bugfix the "reset_config" description (it didn't match the code)
Plus, be more proscriptive: do it in board config files, except for
the oddball cases where that won't work. (Current target.cfg files
seem to have much goofage there; several seem board-specific.)
git-svn-id: svn://svn.berlios.de/openocd/trunk@1913
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
kc8apf [Mon, 25 May 2009 15:56:15 +0000 (15:56 +0000)]
Author: Simon Qian <simonqian@SimonQian.com>
- add tap_state_svf_name since tap_state_name doesn't use SVF standard names
git-svn-id: svn://svn.berlios.de/openocd/trunk@1912
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
kc8apf [Mon, 25 May 2009 15:51:30 +0000 (15:51 +0000)]
Author: Raúl Sánchez Siles <rsanchezs@infoglobal.es>
- cfi flash_address coding style fix
git-svn-id: svn://svn.berlios.de/openocd/trunk@1911
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 24 May 2009 21:13:29 +0000 (21:13 +0000)]
David Brownell <david-b@pacbell.net>:
Doc (mostly) update for jtag_khz:
- switch to @deffn syntax
- add entry for "jtag_rclk"
- move deprecated "jtag_speed" into collection of deprecated calls
And for ft2232, don't be the only adapter to *log* an error if RTCK
is requested; it's already reported properly, like any other nonfatal
command parameter. "jtag_rclk" just works as expected, without any
scarey messages.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1910
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 24 May 2009 21:08:42 +0000 (21:08 +0000)]
David Brownell <david-b@pacbell.net>:
Make startup for the various server ports be quiet, unless
debugging is active: don't emit needless scarey messages.
Update the relevant documentation and its references:
- For these port commands ... cover the default values;
convert to @deffn syntax; include their use outside of
the configuration stage; and alphabetize.
Similar updates to the rest of that small chapter:
- Highlight that there even *IS* a configuration stage, after
which some command functionality is no longer available.
- For GDB commands ... convert to @deffn syntax; alphabetize;
include a missing command (!); add missing helptext (!) for
one non-missing command; update relevant cross-references
and index entries.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1909
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 24 May 2009 20:57:53 +0000 (20:57 +0000)]
David Brownell <david-b@pacbell.net>:
The "Illegal mode for command" diagnostic is deeply useless.
Say "Command '%s' only runs during configuration stage" instead,
letting users know what the real issue is.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1908
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 24 May 2009 20:56:13 +0000 (20:56 +0000)]
David Brownell <david-b@pacbell.net>: minor davinci_nand bugfix
Fix a bug that joined us at the last minute, when an efficient
alloca() call got swapped out for a more portable malloc().
Also log one error, to give a clue in case it appears "in the wild".
git-svn-id: svn://svn.berlios.de/openocd/trunk@1907
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 24 May 2009 11:24:14 +0000 (11:24 +0000)]
Added the options calc_checksum to the flash driver.
This was forgotten here. All other LPC targets use
this option.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1906
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 24 May 2009 02:08:17 +0000 (02:08 +0000)]
Nicolas Pitre <nico@cam.org>: Update sheevaplug interface script:
When the CPU is in the WFI state, the JTAG interface simply doesn't
respond at all and initial tap examination simply fails. Let's simply
do it again when we come around to assert nSRST.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1905
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 24 May 2009 01:57:13 +0000 (01:57 +0000)]
David Brownell <david-b@pacbell.net>:
Update two oddball NAND commands to work with {offset, length}
instead of block numbers, matching the other commands as well
as usage in U-Boot and the Linux-MTD utilities.
Document them accordingly. Update the single in-tree use of
those commands (sheevaplug).
ALSO:
(a) Document the current 2 GByte/chip ceiling for NAND chipsize.
(32 bit offset/length values can't represent 4 GBytes.) Maybe
after the upcoming release, the code can switch to 64-bits.
(b) The "nand check_bad_blocks" should report "bad" blocks. They
are not "invalid" blocks; they're "bad" ones.
(c) Tweak the "nand info" command to handle the "no arguments"
case sanely (show everything, instead of showing garbage) and
not listing the blocksize in hex kbytes (duh).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1904
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 24 May 2009 01:38:19 +0000 (01:38 +0000)]
David Brownell <david-b@pacbell.net>:
NAND support for DaVinci-family drivers, with HW ECC support.
Declare the NAND chip on the DM355 EVM board.
Currently tested on DM355 for Linux interop using the standard
large page (2KB) chip in the EVM socket; "hwecc1" and "hwecc4"
work fine. (Using hwecc4 relies on patches that haven't quite
made it through the Linux-MTD bottlenecks yet.)
Not yet tested: 1-bit on small-page (although it's hard to see
how that could fail); 4-bit on small page (picky layout issues);
the "hwecc_infix" mode (primarily for older boot ROMs; testing
there is blocked on having new bootloader code).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1903
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 24 May 2009 01:33:54 +0000 (01:33 +0000)]
Fix two problems with openocd.texi:
- Fix minor issues with xrefs not liking parentheses around them.
- Change 'Building' section to 'Building OpenOCD'. It reads better.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1902
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 24 May 2009 01:08:16 +0000 (01:08 +0000)]
Properly fix doxygen out-of-tree build process:
- move Doxyfile to Doxyfile.in: type 'make Doxyfile' to recreate it
- create Doxyfile from Doxyfile.in with make rule:
- use sed substitution of $(srcdir) to location directories
- delete all doxygen created files with 'make distclean'
- include all required files (including logger.pl) in distribution
git-svn-id: svn://svn.berlios.de/openocd/trunk@1901
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 24 May 2009 00:47:49 +0000 (00:47 +0000)]
SimonQian <simonqian@SimonQian.com>:
Changes svf_check_tdo function (checks tdo output matches desired values):
- call buf_cmp_mask function to do comparison instead of using a loop.
- fixes a bug when data length is equal to sizeof(int).
git-svn-id: svn://svn.berlios.de/openocd/trunk@1900
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sun, 24 May 2009 00:16:04 +0000 (00:16 +0000)]
Freddie Chopin <freddie_chopin@op.pl>:
- add reset delay settings for LPC2103, LPC2124, and LPC2129.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1899
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 23 May 2009 22:53:39 +0000 (22:53 +0000)]
Add section identifiers to developer scripting introduction.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1898
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 23 May 2009 22:52:47 +0000 (22:52 +0000)]
Update main page of doxygen developer documentation:
- Rewrite copy to give a better introduction and overview.
- Add subpages: The List, Style Guide, Patch Policies, and Bug Reporting.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1897
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 23 May 2009 22:39:03 +0000 (22:39 +0000)]
Add extended doxygen-based style guide draft; requires more work.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1896
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 23 May 2009 22:37:19 +0000 (22:37 +0000)]
Update user guide documentation:
- Remove style guide from user guide; moved to doxygen manual.
- Replace with improved introduction for developers and packagers.
- Move introductory paragraph about the project under the About page.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1895
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 23 May 2009 22:05:05 +0000 (22:05 +0000)]
Include the PATCHES file in Doxygen developer manual.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1894
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 23 May 2009 20:52:18 +0000 (20:52 +0000)]
Submitted by Magnus Lundin <lundin@mlu.mine.nu>:
- Remove FTDI driver tap_set_state call; performed by jtag_add_reset.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1893
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 23 May 2009 20:50:06 +0000 (20:50 +0000)]
Submitted by Magnus Lundin <lundin@mlu.mine.nu>:
- Add jtag_execute_queue in jtag_add_reset after interface_jtag_add_reset.
- Use tap_set_state to demark TAP_RESET, instead of cmd_queue_cur_state
- cmd_queue_cur_state needs to be retired.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1892
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 23 May 2009 20:29:53 +0000 (20:29 +0000)]
Fix make docs rule to work with out-of-tree builds.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1891
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sat, 23 May 2009 18:26:06 +0000 (18:26 +0000)]
Change the setting for the sam7se512 and sam7x256
flash driver because of the new at91sam7 version.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1890
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 23 May 2009 03:42:13 +0000 (03:42 +0000)]
Submitted by Magnus Lundin <lundin@mlu.mine.nu>:
Updates to the J-Link interface driver to support more device versions:
- Add capability detection:
- if capable, detect protocol version; otherwise, assume v2 protocol.
- if capable, detect buffer size; otherwise, assume minimal.
- Disable command result queries for devices using v2 protocol.
- Defined and use JTAG2 command with v2 protocol; JTAG3 is v3 protocol.
- Add TCL command to allow explicit setting of J-Link protocol version.
With approval, I revised the patch to make the following changes:
- add static keywords to new jlink-specific variables
- factor calculation of major_version to be more readable
- remove braces around simple one-line statements in if/else clauses
- remove (rather than #if 0) duplicate reset code; it is in SVN
- use &function to be clearer when passing function pointers
- add symbols for EMU_CMD_GET_CAPS bits; do not hard-code constants!
- almost renamed jlink_handle_jlink_hw_jtag_command (seriously?!?!)
- rewrote that function using a switch statement.
- made version request processing easier to understand and modify
- improve alternate endpoint detection:
- make code easier to read by using temporary variables
- eliminate extra level of indentation and redundant logging
- use ternary conditional to select JTAG2 or JTAG3 command
- reverse version test in jlink_usb_message to reduce indentation
- this had the biggest effect in cleaning up this patch
- use C99's ability to declare new/changed variables with less scope
- add spaces around binary operators in new/changed code
- revert other superfluous whitespace/comment style changes
git-svn-id: svn://svn.berlios.de/openocd/trunk@1889
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 23 May 2009 01:25:39 +0000 (01:25 +0000)]
More printf fixes stemming from format string change in r1882.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1888
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
zwelch [Sat, 23 May 2009 00:51:13 +0000 (00:51 +0000)]
Change doxygen configuration to show code comments in documentation.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1887
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)