From 642cdae32167df80d4dc757f0da5f204e0298088 Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Wed, 7 Apr 2021 15:25:37 +0200 Subject: [PATCH] doc: command 'ftdi_layout_signal' can run after config The mode of command 'ftdi_layout_signal' is set to COMMAND_ANY in [1] and the command has no constraints that limits its use to the config phase only. But [2] documents it as '{Config Command}'. Update the documentation to report the correct mode '{Command}'. [1] commit f5e97b5e1b62 ("Add FTDI JTAG driver using MPSSE layer") [2] commit 76afadeb7b4e ("doc: Add documentation for the ftdi driver") Change-Id: I6b14aebb98e48f7080c585f3df881714bb188af0 Signed-off-by: Antonio Borneo Reviewed-on: http://openocd.zylin.com/6155 Tested-by: jenkins Reviewed-by: Andreas Fritiofson --- doc/openocd.texi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index 3523a222a9..4dd3a3389d 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -2531,7 +2531,7 @@ minimal impact on the target system. Avoid floating inputs, conflicting outputs and initially asserted reset signals. @end deffn -@deffn {Config Command} {ftdi_layout_signal} name [@option{-data}|@option{-ndata} data_mask] [@option{-input}|@option{-ninput} input_mask] [@option{-oe}|@option{-noe} oe_mask] [@option{-alias}|@option{-nalias} name] +@deffn {Command} {ftdi_layout_signal} name [@option{-data}|@option{-ndata} data_mask] [@option{-input}|@option{-ninput} input_mask] [@option{-oe}|@option{-noe} oe_mask] [@option{-alias}|@option{-nalias} name] Creates a signal with the specified @var{name}, controlled by one or more FTDI GPIO pins via a range of possible buffer connections. The masks are FTDI GPIO register bitmasks to tell the driver the connection and type of the output -- 2.30.2