tcl/board: add TI Tiva C ek-tm4c1294xl config
[openocd.git] / HACKING
1 // This file is part of the Doxygen Developer Manual
2 /** @page patchguide Patch Guidelines
4 \attention If you're behind a corporate wall with http only access to the
5 world, you can still use these instructions!
7 \attention You can't send patches to the mailing list anymore at all. Nowadays
8 you are expected to send patches to the OpenOCD Gerrit GIT server for a
9 review.
11 @section gerrit Submitting patches to the OpenOCD Gerrit server
13 OpenOCD is to some extent a "self service" open source project, so to
14 contribute, you must follow the standard procedures to have the best
15 possible chance to get your changes accepted.
17 The procedure to create a patch is essentially:
19 - make the changes
20 - create a commit
21 - send the changes to the Gerrit server for review
22 - correct the patch and re-send it according to review feedback
24 Your patch (or commit) should be a "good patch": focus it on a single
25 issue, and make it be easily reviewable. Don't make
26 it so large that it's hard to review; split large
27 patches into smaller ones. (That can also help
28 track down bugs later on.) All patches should
29 be "clean", which includes preserving the existing
30 coding style and updating documentation as needed.
32 Say in the commit message if it's a bugfix (describe the bug) or a new
33 feature. Don't expect patches to merge immediately
34 for the next release. Be ready to rework patches
35 in response to feedback.
37 Add yourself to the GPL copyright for non-trivial changes.
39 @section stepbystep Step by step procedure
41 -# Create a Gerrit account at:
42 - On subsequent sign ins, use the full URL prefaced with 'http://'
43 For example:
44 -# Add a username to your profile.
45 After creating the Gerrit account and signing in, you will need to
46 add a username to your profile. To do this, go to 'Settings', and
47 add a username of your choice.
48 Your username will be required in step 3 and substituted wherever
49 the string 'USERNAME' is found.
50 -# Create an SSH public key following the directions on github:
51 . You can skip step 3
52 (adding key to Github account) and 4 (testing) - these are useful only if
53 you actually use Github or want to test whether the new key works fine.
54 -# Add this new SSH key to your Gerrit account:
55 go to 'Settings' > 'SSH Public Keys', paste the contents of
56 ~/.ssh/ into the text field (if it's not visible click on
57 'Add Key ...' button) and confirm by clicking 'Add' button.
58 -# Clone the git repository, rather than just download the source:
59 @code
60 git clone git:// openocd
61 @endcode
62 or if you have problems with the "git:" protocol, use
63 the slower http protocol:
64 @code
65 git clone openocd
66 @endcode
67 -# Set up Gerrit with your local repository. All this does it
68 to instruct git locally how to send off the changes.
69 -# Add a new remote to git using Gerrit username:
70 @code
71 git remote add review ssh://
72 git config HEAD:refs/publish/master
73 @endcode
74 Or with http only:
75 @code
76 git remote add review
77 git config HEAD:refs/publish/master
78 @endcode
79 The http password is configured from your gerrit settings -
80 \note If you want to simplify http access you can also add your http password to the url as follows:
81 @code
82 git remote add review
83 @endcode
84 -# You will need to install this hook, we will look into a better solution:
85 @code
86 scp -p -P 29418 .git/hooks/
87 @endcode
88 Or with http only:
89 @code
90 wget
91 mv commit-msg .git/hooks
92 chmod +x .git/hooks/commit-msg
93 @endcode
94 \note A script exists to simplify the two items above. execute:
95 @code
96 tools/ <username>
97 @endcode
98 With @<username@> being your Gerrit username.
99 -# Set up git with your name and email:
100 @code
101 git config --global "John Smith"
102 git config --global ""
103 @endcode
104 -# Work on your patches. Split the work into
105 multiple small patches that can be reviewed and
106 applied seperately and safely to the OpenOCD
107 repository.
108 @code
109 while(!done) {
110 work - edit files using your favorite editor.
111 run "git commit -s -a" to commit all changes.
112 run tools/ to verify your patch style is ok.
113 }
114 @endcode
115 \note use "git add ." before commit to add new files.
117 Comment template, notice the short first line w/topic. The topic field
118 should identify the main part or subsystem the patch touches. Check
119 git log for examples.
120 @code
121 topic: Short comment
122 <blank line>
123 Longer comments over several lines, explaining (where applicable) the
124 reason for the patch and the general idea the solution is based on,
125 any major design decisions, etc...
126 <blank line>
127 Signed-off-by: ...
128 @endcode
129 -# Next you need to make sure that your patches
130 are on top of the latest stuff on the server and
131 that there are no conflicts:
132 @code
133 git pull --rebase origin master
134 @endcode
135 -# Send the patches to the Gerrit server for review:
136 @code
137 git push review
138 @endcode
139 -# Forgot something, want to add more? Just make the changes and do:
140 @code
141 git commit --amend
142 git push review
143 @endcode
145 Further reading:
147 @section timeline When can I expect my contribution to be committed?
149 The code review is intended to take as long as a week or two to allow
150 maintainers and contributors who work on OpenOCD only in their spare
151 time oportunity to perform a review and raise objections.
153 With Gerrit much of the urgency of getting things committed has been
154 removed as the work in progress is safely stored in Gerrit and
155 available if someone needs to build on your work before it is
156 submitted to the official repository.
158 Another factor that contributes to the desire for longer cool-off
159 times (the time a patch lies around without any further changes or
160 comments), it means that the chances of quality regression on the
161 master branch will be much reduced.
163 If a contributor pushes a patch, it is considered good form if another
164 contributor actually approves and submits that patch.
166 It should be noted that a negative review in Gerrit ("-1" or "-2") may (but does
167 not have to) be disregarded if all conditions listed below are met:
169 - the concerns raised in the review have been addressed (or explained),
170 - reviewer does not re-examine the change in a month,
171 - reviewer does not answer e-mails for another month.
173 @section browsing Browsing Patches
174 All OpenOCD patches can be reviewed <a href="">here</a>.
175 */
176 /** @file
177 This file contains the @ref patchguide page.
178 */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 (RSA)