imx8m: add an m4 target to the imx8m
[openocd.git] / NEWS-0.5.0
1 This file includes highlights of the changes made in the
2 OpenOCD 0.5.0 source archive release. See the repository
3 history for details about what changed, including bugfixes
4 and other issues not mentioned here.
5
6 JTAG Layer:
7 New driver for "Bus Pirate"
8 Rename various commands so they're not JTAG-specific
9 There are migration procedures for most of these, but you should
10 convert your scripts to the new names, since those procedures
11 will not be around forever.
12 jtag jinterface ... is now adapter_name
13 jtag_khz ... is now adapter_khz
14 jtag_nsrst_delay ... is now adapter_nsrst_delay
15 jtag_nsrst_assert_width ... is now adapter_nsrst_assert_width
16 Support Voipac VPACLink JTAG Adapter.
17
18 Boundary Scan:
19
20 Transport framework core ... supporting future work for SWD, SPI, and other
21 non-JTAG ways to debug targets or program flash.
22
23 Target Layer:
24 ARM:
25 - basic semihosting support for ARMv7M.
26 - renamed "armv7m" command prefix as "arm"
27 MIPS:
28 - "ejtag_srst" variant removed. The same functionality is
29 obtained by using "reset_config none".
30 - added PIC32MX software reset support, this means srst is not
31 required to be connected anymore.
32 OTHER:
33 - preliminary AVR32 AP7000 support.
34
35 Flash Layer:
36 New "stellaris recover" command, implements the procedure
37 to recover locked devices (restoring non-volatile
38 state to the factory defaults, including erasing
39 the flash and its protection bits, and possibly
40 re-enabling hardware debugging).
41 PIC32MX now uses algorithm for flash programming, this
42 has increased the performance by approx 96%.
43 New 'pic32mx unlock' cmd to remove readout protection.
44 New STM32 Value Line Support.
45 New 'virtual' flash driver, used to associate other addresses
46 with a flash bank. See pic32mx.cfg for usage.
47 New iMX27 NAND flash controller driver.
48
49 Board, Target, and Interface Configuration Scripts:
50 Support IAR LPC1768 kickstart board (by Olimex)
51 Support Voipac PXA270/PXA270M module.
52 New $PARPORTADDR tcl variable used to change default
53 parallel port address used.
54 Remove lm3s811.cfg; use "stellaris.cfg" instead
55
56 Core Jim/TCL Scripting:
57 New "add_script_search_dir" command, behaviour is the same
58 as the "-s" cmd line option.
59
60 Documentation:
61
62 Build and Release:
63
64 For more details about what has changed since the last release,
65 see the git repository history. With gitweb, you can browse that
66 in various levels of detail.
67
68 For older NEWS, see the NEWS files associated with each release
69 (i.e. NEWS-<version>).
70
71 For more information about contributing test reports, bug fixes, or new
72 features and device support, please read the new Developer Manual (or
73 the BUGS and PATCHES.txt files in the source archive).
74

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)