AT91SAM4L: handle reset run/halt in SMAP
[openocd.git] / doc / manual / jtag.txt
1 /** @page jtagdocs JTAG APIs
2
3 For new developers unfamiliar with the technology, @ref primerjtag provides
4 a brief introduction to the IEEE JTAG interface.
5
6 The OpenOCD JTAG library API covers several functional areas. The jtag
7 @b core communicates through the @b minidriver API with either its full
8 @a driver implementation (src/jtag/jtag_driver.c) or a @a minidriver .
9 Internally, the @b command API is used by the JTAG driver for managing
10 asynchronous transactions.
11
12 - @subpage jtagcore
13 - @b public API routines
14 - declared in @c src/jtag/jtag.h
15 - used by other modules
16
17 - @subpage jtagtcl
18 - @b private TCL handling routines
19 - defined in @c src/jtag/tcl.c
20 - registers and handles Jim commands that configure and use the JTAG core
21
22 - @subpage jtagcmd
23 - @b private command queue API
24 - declared in @c src/jtag/commands.h
25 - provides routines used internally by the full JTAG drivers.
26
27 - @subpage jtagiface
28 - @b private interface driver API
29 - declared in @c src/jtag/interface.h
30 - used by the core, minidrivers, and the full interface device drivers.
31 - allows implementing new interface device drivers.
32 - includes the Cable/TAP API (commands starting with @c tap_)
33
34 - @subpage jtagdriver
35 - @b private minidriver API
36 - declared in @c src/jtag/minidriver.h
37 - used @a only by the core and minidriver implementations:
38 - @c jtag_driver.c (in-tree OpenOCD drivers)
39 - @c zy1000/build/include/jtag_minidriver.h (ZY1000 minidriver)
40 - future implementations (on other embedded hosts)
41 - interface device drivers do @b not need this API.
42
43 */
44
45 /** @page jtagcore JTAG Core API
46
47 This section needs to be expanded.
48
49 */
50
51 /** @page jtagtcl JTAG TCL API
52
53 This section needs to be expanded.
54
55 */
56
57 /** @page jtagcmd JTAG Command API
58
59 This section needs to be expanded.
60
61 */
62
63 /** @page jtagiface JTAG Interface API
64
65 This section needs to be expanded.
66
67 */
68
69 /** @page jtagdriver JTAG Minidriver API
70
71 This section needs to be expanded.
72
73 */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)