9572c83a2aa1cb7d28a65efc9f6c53c7fe2b5f99
[openocd.git] / src / flash / cfi.h
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
9 * *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
14 * *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
19 ***************************************************************************/
20 #ifndef CFI_H
21 #define CFI_H
22
23 #include "flash.h"
24 #include "target.h"
25
26 typedef struct cfi_flash_bank_s
27 {
28 working_area_t *write_algorithm;
29 working_area_t *erase_check_algorithm;
30
31 int x16_as_x8;
32 int jedec_probe;
33 int not_cfi;
34
35 u16 manufacturer;
36 u16 device_id;
37
38 char qry[3];
39
40 /* identification string */
41 u16 pri_id;
42 u16 pri_addr;
43 u16 alt_id;
44 u16 alt_addr;
45
46 /* device-system interface */
47 u8 vcc_min;
48 u8 vcc_max;
49 u8 vpp_min;
50 u8 vpp_max;
51 u8 word_write_timeout_typ;
52 u8 buf_write_timeout_typ;
53 u8 block_erase_timeout_typ;
54 u8 chip_erase_timeout_typ;
55 u8 word_write_timeout_max;
56 u8 buf_write_timeout_max;
57 u8 block_erase_timeout_max;
58 u8 chip_erase_timeout_max;
59
60 /* flash geometry */
61 u8 dev_size;
62 u16 interface_desc;
63 u16 max_buf_write_size;
64 u8 num_erase_regions;
65 u32 *erase_region_info;
66
67 void *pri_ext;
68 void *alt_ext;
69 } cfi_flash_bank_t;
70
71 /* Intel primary extended query table
72 * as defined for the Advanced+ Boot Block Flash Memory (C3)
73 * and used by the linux kernel cfi driver (as of 2.6.14)
74 */
75 typedef struct cfi_intel_pri_ext_s
76 {
77 char pri[3];
78 u8 major_version;
79 u8 minor_version;
80 u32 feature_support;
81 u8 suspend_cmd_support;
82 u16 blk_status_reg_mask;
83 u8 vcc_optimal;
84 u8 vpp_optimal;
85 u8 num_protection_fields;
86 u16 prot_reg_addr;
87 u8 fact_prot_reg_size;
88 u8 user_prot_reg_size;
89 u8 extra[0];
90 } cfi_intel_pri_ext_t;
91
92 /* Spansion primary extended query table as defined for and used by
93 * the linux kernel cfi driver (as of 2.6.15)
94 */
95 typedef struct cfi_spansion_pri_ext_s
96 {
97 u8 pri[3];
98 u8 major_version;
99 u8 minor_version;
100 u8 SiliconRevision; /* bits 1-0: Address Sensitive Unlock */
101 u8 EraseSuspend;
102 u8 BlkProt;
103 u8 TmpBlkUnprotect;
104 u8 BlkProtUnprot;
105 u8 SimultaneousOps;
106 u8 BurstMode;
107 u8 PageMode;
108 u8 VppMin;
109 u8 VppMax;
110 u8 TopBottom;
111 int _reversed_geometry;
112 u32 _unlock1;
113 u32 _unlock2;
114 } cfi_spansion_pri_ext_t;
115
116 /* Atmel primary extended query table as defined for and used by
117 * the linux kernel cfi driver (as of 2.6.20+)
118 */
119 typedef struct cfi_atmel_pri_ext_s
120 {
121 u8 pri[3];
122 u8 major_version;
123 u8 minor_version;
124 u8 features;
125 u8 bottom_boot;
126 u8 burst_mode;
127 u8 page_mode;
128 } cfi_atmel_pri_ext_t;
129
130 enum {
131 CFI_UNLOCK_555_2AA,
132 CFI_UNLOCK_5555_2AAA,
133 };
134
135 typedef struct cfi_unlock_addresses_s
136 {
137 u32 unlock1;
138 u32 unlock2;
139 } cfi_unlock_addresses_t;
140
141 typedef struct cfi_fixup_s
142 {
143 u16 mfr;
144 u16 id;
145 void (*fixup)(flash_bank_t *flash, void *param);
146 void *param;
147 } cfi_fixup_t;
148
149 #define CFI_MFR_AMD 0x0001
150 #define CFI_MFR_ATMEL 0x001F
151 #define CFI_MFR_ST 0x0020 /* STMicroelectronics */
152 #define CFI_MFR_SST 0x00BF
153
154 #define CFI_MFR_ANY 0xffff
155 #define CFI_ID_ANY 0xffff
156
157 #endif /* CFI_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)