NOR: Allocate the right amount of memory
[openocd.git] / src / flash / nor / core.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath <Dominic.Rath@gmx.de> *
3 * Copyright (C) 2007,2008 Øyvind Harboe <oyvind.harboe@zylin.com> *
4 * Copyright (C) 2008 by Spencer Oliver <spen@spen-soft.co.uk> *
5 * Copyright (C) 2009 Zachary T Welch <zw@superlucidity.net> *
6 * *
7 * This program is free software; you can redistribute it and/or modify *
8 * it under the terms of the GNU General Public License as published by *
9 * the Free Software Foundation; either version 2 of the License, or *
10 * (at your option) any later version. *
11 * *
12 * This program is distributed in the hope that it will be useful, *
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
15 * GNU General Public License for more details. *
16 * *
17 * You should have received a copy of the GNU General Public License *
18 * along with this program; if not, write to the *
19 * Free Software Foundation, Inc., *
20 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
21 ***************************************************************************/
22
23 #ifdef HAVE_CONFIG_H
24 #include <config.h>
25 #endif
26 #include <flash/common.h>
27 #include <flash/nor/core.h>
28 #include <flash/nor/imp.h>
29 #include <target/image.h>
30
31
32 struct flash_bank *flash_banks;
33
34 int flash_driver_erase(struct flash_bank *bank, int first, int last)
35 {
36 int retval;
37
38 retval = bank->driver->erase(bank, first, last);
39 if (retval != ERROR_OK)
40 {
41 LOG_ERROR("failed erasing sectors %d to %d (%d)", first, last, retval);
42 }
43
44 return retval;
45 }
46
47 int flash_driver_protect(struct flash_bank *bank, int set, int first, int last)
48 {
49 int retval;
50
51 retval = bank->driver->protect(bank, set, first, last);
52 if (retval != ERROR_OK)
53 {
54 LOG_ERROR("failed setting protection for areas %d to %d (%d)", first, last, retval);
55 }
56
57 return retval;
58 }
59
60 int flash_driver_write(struct flash_bank *bank,
61 uint8_t *buffer, uint32_t offset, uint32_t count)
62 {
63 int retval;
64
65 retval = bank->driver->write(bank, buffer, offset, count);
66 if (retval != ERROR_OK)
67 {
68 LOG_ERROR("error writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32 " (%d)",
69 bank->base, offset, retval);
70 }
71
72 return retval;
73 }
74
75 void flash_bank_add(struct flash_bank *bank)
76 {
77 /* put flash bank in linked list */
78 unsigned bank_num = 0;
79 if (flash_banks)
80 {
81 /* find last flash bank */
82 struct flash_bank *p = flash_banks;
83 while (NULL != p->next)
84 {
85 bank_num += 1;
86 p = p->next;
87 }
88 p->next = bank;
89 bank_num += 1;
90 }
91 else
92 flash_banks = bank;
93
94 bank->bank_number = bank_num;
95 }
96
97 struct flash_bank *flash_bank_list(void)
98 {
99 return flash_banks;
100 }
101
102 struct flash_bank *get_flash_bank_by_num_noprobe(int num)
103 {
104 struct flash_bank *p;
105 int i = 0;
106
107 for (p = flash_banks; p; p = p->next)
108 {
109 if (i++ == num)
110 {
111 return p;
112 }
113 }
114 LOG_ERROR("flash bank %d does not exist", num);
115 return NULL;
116 }
117
118 int flash_get_bank_count(void)
119 {
120 struct flash_bank *p;
121 int i = 0;
122 for (p = flash_banks; p; p = p->next)
123 {
124 i++;
125 }
126 return i;
127 }
128
129 struct flash_bank *get_flash_bank_by_name(const char *name)
130 {
131 unsigned requested = get_flash_name_index(name);
132 unsigned found = 0;
133
134 struct flash_bank *bank;
135 for (bank = flash_banks; NULL != bank; bank = bank->next)
136 {
137 if (strcmp(bank->name, name) == 0)
138 return bank;
139 if (!flash_driver_name_matches(bank->driver->name, name))
140 continue;
141 if (++found < requested)
142 continue;
143 return bank;
144 }
145 return NULL;
146 }
147
148 struct flash_bank *get_flash_bank_by_num(int num)
149 {
150 struct flash_bank *p = get_flash_bank_by_num_noprobe(num);
151 int retval;
152
153 if (p == NULL)
154 return NULL;
155
156 retval = p->driver->auto_probe(p);
157
158 if (retval != ERROR_OK)
159 {
160 LOG_ERROR("auto_probe failed %d\n", retval);
161 return NULL;
162 }
163 return p;
164 }
165
166 /* lookup flash bank by address */
167 struct flash_bank *get_flash_bank_by_addr(struct target *target, uint32_t addr)
168 {
169 struct flash_bank *c;
170
171 /* cycle through bank list */
172 for (c = flash_banks; c; c = c->next)
173 {
174 int retval;
175 retval = c->driver->auto_probe(c);
176
177 if (retval != ERROR_OK)
178 {
179 LOG_ERROR("auto_probe failed %d\n", retval);
180 return NULL;
181 }
182 /* check whether address belongs to this flash bank */
183 if ((addr >= c->base) && (addr <= c->base + (c->size - 1)) && target == c->target)
184 return c;
185 }
186 LOG_ERROR("No flash at address 0x%08" PRIx32 "\n", addr);
187 return NULL;
188 }
189
190 int default_flash_mem_blank_check(struct flash_bank *bank)
191 {
192 struct target *target = bank->target;
193 const int buffer_size = 1024;
194 int i;
195 uint32_t nBytes;
196 int retval = ERROR_OK;
197
198 if (bank->target->state != TARGET_HALTED)
199 {
200 LOG_ERROR("Target not halted");
201 return ERROR_TARGET_NOT_HALTED;
202 }
203
204 uint8_t *buffer = malloc(buffer_size);
205
206 for (i = 0; i < bank->num_sectors; i++)
207 {
208 uint32_t j;
209 bank->sectors[i].is_erased = 1;
210
211 for (j = 0; j < bank->sectors[i].size; j += buffer_size)
212 {
213 uint32_t chunk;
214 chunk = buffer_size;
215 if (chunk > (j - bank->sectors[i].size))
216 {
217 chunk = (j - bank->sectors[i].size);
218 }
219
220 retval = target_read_memory(target, bank->base + bank->sectors[i].offset + j, 4, chunk/4, buffer);
221 if (retval != ERROR_OK)
222 {
223 goto done;
224 }
225
226 for (nBytes = 0; nBytes < chunk; nBytes++)
227 {
228 if (buffer[nBytes] != 0xFF)
229 {
230 bank->sectors[i].is_erased = 0;
231 break;
232 }
233 }
234 }
235 }
236
237 done:
238 free(buffer);
239
240 return retval;
241 }
242
243 int default_flash_blank_check(struct flash_bank *bank)
244 {
245 struct target *target = bank->target;
246 int i;
247 int retval;
248 int fast_check = 0;
249 uint32_t blank;
250
251 if (bank->target->state != TARGET_HALTED)
252 {
253 LOG_ERROR("Target not halted");
254 return ERROR_TARGET_NOT_HALTED;
255 }
256
257 for (i = 0; i < bank->num_sectors; i++)
258 {
259 uint32_t address = bank->base + bank->sectors[i].offset;
260 uint32_t size = bank->sectors[i].size;
261
262 if ((retval = target_blank_check_memory(target, address, size, &blank)) != ERROR_OK)
263 {
264 fast_check = 0;
265 break;
266 }
267 if (blank == 0xFF)
268 bank->sectors[i].is_erased = 1;
269 else
270 bank->sectors[i].is_erased = 0;
271 fast_check = 1;
272 }
273
274 if (!fast_check)
275 {
276 LOG_USER("Running slow fallback erase check - add working memory");
277 return default_flash_mem_blank_check(bank);
278 }
279
280 return ERROR_OK;
281 }
282
283 /* erase given flash region, selects proper bank according to target and address */
284 static int flash_iterate_address_range(struct target *target,
285 uint32_t addr, uint32_t length,
286 int (*callback)(struct flash_bank *bank, int first, int last))
287 {
288 struct flash_bank *c;
289 uint32_t last_addr = addr + length; /* first address AFTER end */
290 int first = -1;
291 int last = -1;
292 int i;
293
294 if ((c = get_flash_bank_by_addr(target, addr)) == NULL)
295 return ERROR_FLASH_DST_OUT_OF_BANK; /* no corresponding bank found */
296
297 if (c->size == 0 || c->num_sectors == 0)
298 {
299 LOG_ERROR("Bank is invalid");
300 return ERROR_FLASH_BANK_INVALID;
301 }
302
303 if (length == 0)
304 {
305 /* special case, erase whole bank when length is zero */
306 if (addr != c->base)
307 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
308
309 return callback(c, 0, c->num_sectors - 1);
310 }
311
312 /* check whether it all fits in this bank */
313 if (addr + length - 1 > c->base + c->size - 1)
314 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
315
316 /** @todo: handle erasures that cross into adjacent banks */
317
318 addr -= c->base;
319
320 for (i = 0; i < c->num_sectors; i++)
321 {
322 struct flash_sector *f = c->sectors + i;
323
324 /* start only on a sector boundary */
325 if (first < 0) {
326 /* is this the first sector? */
327 if (addr == f->offset)
328 first = i;
329 else if (addr < f->offset)
330 break;
331 }
332
333 /* is this (also?) the last sector? */
334 if (last_addr == f->offset + f->size) {
335 last = i;
336 break;
337 }
338
339 /* MUST finish on a sector boundary */
340 if (last_addr <= f->offset)
341 break;
342 }
343
344 /* invalid start or end address? */
345 if (first == -1 || last == -1) {
346 LOG_ERROR("address range 0x%8.8x .. 0x%8.8x "
347 "is not sector-aligned",
348 (unsigned) (c->base + addr),
349 (unsigned) (last_addr - 1));
350 return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
351 }
352
353 /* The NOR driver may trim this range down, based on
354 * whether or not a given sector is already erased.
355 *
356 * REVISIT should *we* trim it... ?
357 */
358 return callback(c, first, last);
359 }
360
361 int flash_erase_address_range(struct target *target,
362 uint32_t addr, uint32_t length)
363 {
364 return flash_iterate_address_range(target,
365 addr, length, &flash_driver_erase);
366 }
367
368 static int flash_driver_unprotect(struct flash_bank *bank, int first, int last)
369 {
370 return flash_driver_protect(bank, 0, first, last);
371 }
372
373 static int flash_unlock_address_range(struct target *target, uint32_t addr, uint32_t length)
374 {
375 return flash_iterate_address_range(target,
376 addr, length, &flash_driver_unprotect);
377 }
378
379 int flash_write_unlock(struct target *target, struct image *image,
380 uint32_t *written, int erase, bool unlock)
381 {
382 int retval = ERROR_OK;
383
384 int section;
385 uint32_t section_offset;
386 struct flash_bank *c;
387 int *padding;
388
389 section = 0;
390 section_offset = 0;
391
392 if (written)
393 *written = 0;
394
395 if (erase)
396 {
397 /* assume all sectors need erasing - stops any problems
398 * when flash_write is called multiple times */
399
400 flash_set_dirty();
401 }
402
403 /* allocate padding array */
404 padding = calloc(image->num_sections, sizeof(*padding));
405
406 /* loop until we reach end of the image */
407 while (section < image->num_sections)
408 {
409 uint32_t buffer_size;
410 uint8_t *buffer;
411 int section_first;
412 int section_last;
413 uint32_t run_address = image->sections[section].base_address + section_offset;
414 uint32_t run_size = image->sections[section].size - section_offset;
415 int pad_bytes = 0;
416
417 if (image->sections[section].size == 0)
418 {
419 LOG_WARNING("empty section %d", section);
420 section++;
421 section_offset = 0;
422 continue;
423 }
424
425 /* find the corresponding flash bank */
426 if ((c = get_flash_bank_by_addr(target, run_address)) == NULL)
427 {
428 section++; /* and skip it */
429 section_offset = 0;
430 continue;
431 }
432
433 /* collect consecutive sections which fall into the same bank */
434 section_first = section;
435 section_last = section;
436 padding[section] = 0;
437 while ((run_address + run_size - 1 < c->base + c->size - 1)
438 && (section_last + 1 < image->num_sections))
439 {
440 if (image->sections[section_last + 1].base_address < (run_address + run_size))
441 {
442 LOG_DEBUG("section %d out of order(very slightly surprising, but supported)", section_last + 1);
443 break;
444 }
445 /* if we have multiple sections within our image, flash programming could fail due to alignment issues
446 * attempt to rebuild a consecutive buffer for the flash loader */
447 pad_bytes = (image->sections[section_last + 1].base_address) - (run_address + run_size);
448 if ((run_address + run_size + pad_bytes) > (c->base + c->size))
449 break;
450 padding[section_last] = pad_bytes;
451 run_size += image->sections[++section_last].size;
452 run_size += pad_bytes;
453 padding[section_last] = 0;
454
455 LOG_INFO("Padding image section %d with %d bytes", section_last-1, pad_bytes);
456 }
457
458 /* fit the run into bank constraints */
459 if (run_address + run_size - 1 > c->base + c->size - 1)
460 {
461 LOG_WARNING("writing %d bytes only - as image section is %d bytes and bank is only %d bytes", \
462 (int)(c->base + c->size - run_address), (int)(run_size), (int)(c->size));
463 run_size = c->base + c->size - run_address;
464 }
465
466 /* allocate buffer */
467 buffer = malloc(run_size);
468 buffer_size = 0;
469
470 /* read sections to the buffer */
471 while (buffer_size < run_size)
472 {
473 size_t size_read;
474
475 size_read = run_size - buffer_size;
476 if (size_read > image->sections[section].size - section_offset)
477 size_read = image->sections[section].size - section_offset;
478
479 if ((retval = image_read_section(image, section, section_offset,
480 size_read, buffer + buffer_size, &size_read)) != ERROR_OK || size_read == 0)
481 {
482 free(buffer);
483 free(padding);
484 return retval;
485 }
486
487 /* see if we need to pad the section */
488 while (padding[section]--)
489 (buffer + buffer_size)[size_read++] = 0xff;
490
491 buffer_size += size_read;
492 section_offset += size_read;
493
494 if (section_offset >= image->sections[section].size)
495 {
496 section++;
497 section_offset = 0;
498 }
499 }
500
501 retval = ERROR_OK;
502
503 if (unlock)
504 {
505 retval = flash_unlock_address_range(target, run_address, run_size);
506 }
507 if (retval == ERROR_OK)
508 {
509 if (erase)
510 {
511 /* calculate and erase sectors */
512 retval = flash_erase_address_range(target, run_address, run_size);
513 }
514 }
515
516 if (retval == ERROR_OK)
517 {
518 /* write flash sectors */
519 retval = flash_driver_write(c, buffer, run_address - c->base, run_size);
520 }
521
522 free(buffer);
523
524 if (retval != ERROR_OK)
525 {
526 free(padding);
527 return retval; /* abort operation */
528 }
529
530 if (written != NULL)
531 *written += run_size; /* add run size to total written counter */
532 }
533
534 free(padding);
535
536 return retval;
537 }
538
539 int flash_write(struct target *target, struct image *image,
540 uint32_t *written, int erase)
541 {
542 return flash_write_unlock(target, image, written, erase, false);
543 }

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)