1 /***************************************************************************
2 * Copyright (C) 2011 by Mathias Kuester *
5 * Copyright (C) 2011 sleep(5) ltd *
6 * tomas@sleepfive.com *
8 * Copyright (C) 2012 by Christopher D. Kilgour *
9 * techie at whiterocker.com *
11 * Copyright (C) 2013 Nemui Trinomius *
12 * nemuisan_kawausogasuki@live.jp *
14 * Copyright (C) 2015 Tomas Vanek *
17 * This program is free software; you can redistribute it and/or modify *
18 * it under the terms of the GNU General Public License as published by *
19 * the Free Software Foundation; either version 2 of the License, or *
20 * (at your option) any later version. *
22 * This program is distributed in the hope that it will be useful, *
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
25 * GNU General Public License for more details. *
27 * You should have received a copy of the GNU General Public License *
28 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
29 ***************************************************************************/
35 #include "jtag/interface.h"
37 #include <helper/binarybuffer.h>
38 #include <helper/time_support.h>
39 #include <target/target_type.h>
40 #include <target/algorithm.h>
41 #include <target/armv7m.h>
42 #include <target/cortex_m.h>
45 * Implementation Notes
47 * The persistent memories in the Kinetis chip families K10 through
48 * K70 are all manipulated with the Flash Memory Module. Some
49 * variants call this module the FTFE, others call it the FTFL. To
50 * indicate that both are considered here, we use FTFX.
52 * Within the module, according to the chip variant, the persistent
53 * memory is divided into what Freescale terms Program Flash, FlexNVM,
54 * and FlexRAM. All chip variants have Program Flash. Some chip
55 * variants also have FlexNVM and FlexRAM, which always appear
58 * A given Kinetis chip may have 1, 2 or 4 blocks of flash. Here we map
59 * each block to a separate bank. Each block size varies by chip and
60 * may be determined by the read-only SIM_FCFG1 register. The sector
61 * size within each bank/block varies by chip, and may be 1, 2 or 4k.
62 * The sector size may be different for flash and FlexNVM.
64 * The first half of the flash (1 or 2 blocks) is always Program Flash
65 * and always starts at address 0x00000000. The "PFLSH" flag, bit 23
66 * of the read-only SIM_FCFG2 register, determines whether the second
67 * half of the flash is also Program Flash or FlexNVM+FlexRAM. When
68 * PFLSH is set, the second from the first half. When PFLSH is clear,
69 * the second half of flash is FlexNVM and always starts at address
70 * 0x10000000. FlexRAM, which is also present when PFLSH is clear,
71 * always starts at address 0x14000000.
73 * The Flash Memory Module provides a register set where flash
74 * commands are loaded to perform flash operations like erase and
75 * program. Different commands are available depending on whether
76 * Program Flash or FlexNVM/FlexRAM is being manipulated. Although
77 * the commands used are quite consistent between flash blocks, the
78 * parameters they accept differ according to the flash sector size.
83 #define FLEXRAM 0x14000000
85 #define FMC_PFB01CR 0x4001f004
86 #define FTFx_FSTAT 0x40020000
87 #define FTFx_FCNFG 0x40020001
88 #define FTFx_FCCOB3 0x40020004
89 #define FTFx_FPROT3 0x40020010
90 #define FTFx_FDPROT 0x40020017
91 #define SIM_SDID 0x40048024
92 #define SIM_SOPT1 0x40047000
93 #define SIM_FCFG1 0x4004804c
94 #define SIM_FCFG2 0x40048050
95 #define WDOG_STCTRH 0x40052000
96 #define SMC_PMCTRL 0x4007E001
97 #define SMC_PMSTAT 0x4007E003
100 #define PM_STAT_RUN 0x01
101 #define PM_STAT_VLPR 0x04
102 #define PM_CTRL_RUNM_RUN 0x00
105 #define FTFx_CMD_BLOCKSTAT 0x00
106 #define FTFx_CMD_SECTSTAT 0x01
107 #define FTFx_CMD_LWORDPROG 0x06
108 #define FTFx_CMD_SECTERASE 0x09
109 #define FTFx_CMD_SECTWRITE 0x0b
110 #define FTFx_CMD_MASSERASE 0x44
111 #define FTFx_CMD_PGMPART 0x80
112 #define FTFx_CMD_SETFLEXRAM 0x81
114 /* The older Kinetis K series uses the following SDID layout :
121 * The newer Kinetis series uses the following SDID layout :
123 * Bit 27-24 : SUBFAMID
124 * Bit 23-20 : SERIESID
125 * Bit 19-16 : SRAMSIZE
127 * Bit 6-4 : Reserved (0)
130 * We assume that if bits 31-16 are 0 then it's an older
134 #define KINETIS_SOPT1_RAMSIZE_MASK 0x0000F000
135 #define KINETIS_SOPT1_RAMSIZE_K24FN1M 0x0000B000
137 #define KINETIS_SDID_K_SERIES_MASK 0x0000FFFF
139 #define KINETIS_SDID_DIEID_MASK 0x00000F80
141 #define KINETIS_SDID_DIEID_K22FN128 0x00000680 /* smaller pflash with FTFA */
142 #define KINETIS_SDID_DIEID_K22FN256 0x00000A80
143 #define KINETIS_SDID_DIEID_K22FN512 0x00000E80
144 #define KINETIS_SDID_DIEID_K24FN256 0x00000700
146 #define KINETIS_SDID_DIEID_K24FN1M 0x00000300 /* Detect Errata 7534 */
148 /* We can't rely solely on the FAMID field to determine the MCU
149 * type since some FAMID values identify multiple MCUs with
150 * different flash sector sizes (K20 and K22 for instance).
151 * Therefore we combine it with the DIEID bits which may possibly
152 * break if Freescale bumps the DIEID for a particular MCU. */
153 #define KINETIS_K_SDID_TYPE_MASK 0x00000FF0
154 #define KINETIS_K_SDID_K10_M50 0x00000000
155 #define KINETIS_K_SDID_K10_M72 0x00000080
156 #define KINETIS_K_SDID_K10_M100 0x00000100
157 #define KINETIS_K_SDID_K10_M120 0x00000180
158 #define KINETIS_K_SDID_K11 0x00000220
159 #define KINETIS_K_SDID_K12 0x00000200
160 #define KINETIS_K_SDID_K20_M50 0x00000010
161 #define KINETIS_K_SDID_K20_M72 0x00000090
162 #define KINETIS_K_SDID_K20_M100 0x00000110
163 #define KINETIS_K_SDID_K20_M120 0x00000190
164 #define KINETIS_K_SDID_K21_M50 0x00000230
165 #define KINETIS_K_SDID_K21_M120 0x00000330
166 #define KINETIS_K_SDID_K22_M50 0x00000210
167 #define KINETIS_K_SDID_K22_M120 0x00000310
168 #define KINETIS_K_SDID_K30_M72 0x000000A0
169 #define KINETIS_K_SDID_K30_M100 0x00000120
170 #define KINETIS_K_SDID_K40_M72 0x000000B0
171 #define KINETIS_K_SDID_K40_M100 0x00000130
172 #define KINETIS_K_SDID_K50_M72 0x000000E0
173 #define KINETIS_K_SDID_K51_M72 0x000000F0
174 #define KINETIS_K_SDID_K53 0x00000170
175 #define KINETIS_K_SDID_K60_M100 0x00000140
176 #define KINETIS_K_SDID_K60_M150 0x000001C0
177 #define KINETIS_K_SDID_K70_M150 0x000001D0
179 #define KINETIS_SDID_SERIESID_MASK 0x00F00000
180 #define KINETIS_SDID_SERIESID_K 0x00000000
181 #define KINETIS_SDID_SERIESID_KL 0x00100000
182 #define KINETIS_SDID_SERIESID_KW 0x00500000
183 #define KINETIS_SDID_SERIESID_KV 0x00600000
185 #define KINETIS_SDID_SUBFAMID_MASK 0x0F000000
186 #define KINETIS_SDID_SUBFAMID_KX0 0x00000000
187 #define KINETIS_SDID_SUBFAMID_KX1 0x01000000
188 #define KINETIS_SDID_SUBFAMID_KX2 0x02000000
189 #define KINETIS_SDID_SUBFAMID_KX3 0x03000000
190 #define KINETIS_SDID_SUBFAMID_KX4 0x04000000
191 #define KINETIS_SDID_SUBFAMID_KX5 0x05000000
192 #define KINETIS_SDID_SUBFAMID_KX6 0x06000000
194 #define KINETIS_SDID_FAMILYID_MASK 0xF0000000
195 #define KINETIS_SDID_FAMILYID_K0X 0x00000000
196 #define KINETIS_SDID_FAMILYID_K1X 0x10000000
197 #define KINETIS_SDID_FAMILYID_K2X 0x20000000
198 #define KINETIS_SDID_FAMILYID_K3X 0x30000000
199 #define KINETIS_SDID_FAMILYID_K4X 0x40000000
200 #define KINETIS_SDID_FAMILYID_K6X 0x60000000
201 #define KINETIS_SDID_FAMILYID_K7X 0x70000000
203 struct kinetis_flash_bank
{
205 uint32_t sector_size
;
206 uint32_t max_flash_prog_size
;
207 uint32_t protection_size
;
208 uint32_t prog_base
; /* base address for FTFx operations */
209 /* same as bank->base for pflash, differs for FlexNVM */
210 uint32_t protection_block
; /* number of first protection block in this bank */
224 FS_PROGRAM_SECTOR
= 1,
225 FS_PROGRAM_LONGWORD
= 2,
226 FS_PROGRAM_PHRASE
= 4, /* Unsupported */
227 FS_INVALIDATE_CACHE
= 8,
233 #define MDM_REG_STAT 0x00
234 #define MDM_REG_CTRL 0x04
235 #define MDM_REG_ID 0xfc
237 #define MDM_STAT_FMEACK (1<<0)
238 #define MDM_STAT_FREADY (1<<1)
239 #define MDM_STAT_SYSSEC (1<<2)
240 #define MDM_STAT_SYSRES (1<<3)
241 #define MDM_STAT_FMEEN (1<<5)
242 #define MDM_STAT_BACKDOOREN (1<<6)
243 #define MDM_STAT_LPEN (1<<7)
244 #define MDM_STAT_VLPEN (1<<8)
245 #define MDM_STAT_LLSMODEXIT (1<<9)
246 #define MDM_STAT_VLLSXMODEXIT (1<<10)
247 #define MDM_STAT_CORE_HALTED (1<<16)
248 #define MDM_STAT_CORE_SLEEPDEEP (1<<17)
249 #define MDM_STAT_CORESLEEPING (1<<18)
251 #define MDM_CTRL_FMEIP (1<<0)
252 #define MDM_CTRL_DBG_DIS (1<<1)
253 #define MDM_CTRL_DBG_REQ (1<<2)
254 #define MDM_CTRL_SYS_RES_REQ (1<<3)
255 #define MDM_CTRL_CORE_HOLD_RES (1<<4)
256 #define MDM_CTRL_VLLSX_DBG_REQ (1<<5)
257 #define MDM_CTRL_VLLSX_DBG_ACK (1<<6)
258 #define MDM_CTRL_VLLSX_STAT_ACK (1<<7)
260 #define MDM_ACCESS_TIMEOUT 500 /* msec */
262 static int kinetis_mdm_write_register(struct adiv5_dap
*dap
, unsigned reg
, uint32_t value
)
265 LOG_DEBUG("MDM_REG[0x%02x] <- %08" PRIX32
, reg
, value
);
267 retval
= dap_queue_ap_write(dap_ap(dap
, MDM_AP
), reg
, value
);
268 if (retval
!= ERROR_OK
) {
269 LOG_DEBUG("MDM: failed to queue a write request");
273 retval
= dap_run(dap
);
274 if (retval
!= ERROR_OK
) {
275 LOG_DEBUG("MDM: dap_run failed");
283 static int kinetis_mdm_read_register(struct adiv5_dap
*dap
, unsigned reg
, uint32_t *result
)
287 retval
= dap_queue_ap_read(dap_ap(dap
, MDM_AP
), reg
, result
);
288 if (retval
!= ERROR_OK
) {
289 LOG_DEBUG("MDM: failed to queue a read request");
293 retval
= dap_run(dap
);
294 if (retval
!= ERROR_OK
) {
295 LOG_DEBUG("MDM: dap_run failed");
299 LOG_DEBUG("MDM_REG[0x%02x]: %08" PRIX32
, reg
, *result
);
303 static int kinetis_mdm_poll_register(struct adiv5_dap
*dap
, unsigned reg
,
304 uint32_t mask
, uint32_t value
, uint32_t timeout_ms
)
308 int64_t ms_timeout
= timeval_ms() + timeout_ms
;
311 retval
= kinetis_mdm_read_register(dap
, reg
, &val
);
312 if (retval
!= ERROR_OK
|| (val
& mask
) == value
)
316 } while (timeval_ms() < ms_timeout
);
318 LOG_DEBUG("MDM: polling timed out");
323 * This command can be used to break a watchdog reset loop when
324 * connecting to an unsecured target. Unlike other commands, halt will
325 * automatically retry as it does not know how far into the boot process
326 * it is when the command is called.
328 COMMAND_HANDLER(kinetis_mdm_halt
)
330 struct target
*target
= get_current_target(CMD_CTX
);
331 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
332 struct adiv5_dap
*dap
= cortex_m
->armv7m
.arm
.dap
;
336 int64_t ms_timeout
= timeval_ms() + MDM_ACCESS_TIMEOUT
;
339 LOG_ERROR("Cannot perform halt with a high-level adapter");
346 kinetis_mdm_write_register(dap
, MDM_REG_CTRL
, MDM_CTRL_CORE_HOLD_RES
);
350 retval
= kinetis_mdm_read_register(dap
, MDM_REG_STAT
, &stat
);
351 if (retval
!= ERROR_OK
) {
352 LOG_DEBUG("MDM: failed to read MDM_REG_STAT");
356 /* Repeat setting MDM_CTRL_CORE_HOLD_RES until system is out of
357 * reset with flash ready and without security
359 if ((stat
& (MDM_STAT_FREADY
| MDM_STAT_SYSSEC
| MDM_STAT_SYSRES
))
360 == (MDM_STAT_FREADY
| MDM_STAT_SYSRES
))
363 if (timeval_ms() >= ms_timeout
) {
364 LOG_ERROR("MDM: halt timed out");
369 LOG_DEBUG("MDM: halt succeded after %d attempts.", tries
);
372 /* enable polling in case kinetis_check_flash_security_status disabled it */
373 jtag_poll_set_enabled(true);
377 target
->reset_halt
= true;
378 target
->type
->assert_reset(target
);
380 retval
= kinetis_mdm_write_register(dap
, MDM_REG_CTRL
, 0);
381 if (retval
!= ERROR_OK
) {
382 LOG_ERROR("MDM: failed to clear MDM_REG_CTRL");
386 target
->type
->deassert_reset(target
);
391 COMMAND_HANDLER(kinetis_mdm_reset
)
393 struct target
*target
= get_current_target(CMD_CTX
);
394 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
395 struct adiv5_dap
*dap
= cortex_m
->armv7m
.arm
.dap
;
399 LOG_ERROR("Cannot perform reset with a high-level adapter");
403 retval
= kinetis_mdm_write_register(dap
, MDM_REG_CTRL
, MDM_CTRL_SYS_RES_REQ
);
404 if (retval
!= ERROR_OK
) {
405 LOG_ERROR("MDM: failed to write MDM_REG_CTRL");
409 retval
= kinetis_mdm_poll_register(dap
, MDM_REG_STAT
, MDM_STAT_SYSRES
, 0, 500);
410 if (retval
!= ERROR_OK
) {
411 LOG_ERROR("MDM: failed to assert reset");
415 retval
= kinetis_mdm_write_register(dap
, MDM_REG_CTRL
, 0);
416 if (retval
!= ERROR_OK
) {
417 LOG_ERROR("MDM: failed to clear MDM_REG_CTRL");
425 * This function implements the procedure to mass erase the flash via
426 * SWD/JTAG on Kinetis K and L series of devices as it is described in
427 * AN4835 "Production Flash Programming Best Practices for Kinetis K-
428 * and L-series MCUs" Section 4.2.1. To prevent a watchdog reset loop,
429 * the core remains halted after this function completes as suggested
430 * by the application note.
432 COMMAND_HANDLER(kinetis_mdm_mass_erase
)
434 struct target
*target
= get_current_target(CMD_CTX
);
435 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
436 struct adiv5_dap
*dap
= cortex_m
->armv7m
.arm
.dap
;
439 LOG_ERROR("Cannot perform mass erase with a high-level adapter");
446 * ... Power on the processor, or if power has already been
447 * applied, assert the RESET pin to reset the processor. For
448 * devices that do not have a RESET pin, write the System
449 * Reset Request bit in the MDM-AP control register after
450 * establishing communication...
453 /* assert SRST if configured */
454 bool has_srst
= jtag_get_reset_config() & RESET_HAS_SRST
;
456 adapter_assert_reset();
458 retval
= kinetis_mdm_write_register(dap
, MDM_REG_CTRL
, MDM_CTRL_SYS_RES_REQ
);
459 if (retval
!= ERROR_OK
&& !has_srst
) {
460 LOG_ERROR("MDM: failed to assert reset");
461 goto deassert_reset_and_exit
;
465 * ... Read the MDM-AP status register repeatedly and wait for
466 * stable conditions suitable for mass erase:
467 * - mass erase is enabled
469 * - reset is finished
471 * Mass erase is started as soon as all conditions are met in 32
472 * subsequent status reads.
474 * In case of not stable conditions (RESET/WDOG loop in secured device)
475 * the user is asked for manual pressing of RESET button
478 int cnt_mass_erase_disabled
= 0;
480 int64_t ms_start
= timeval_ms();
481 bool man_reset_requested
= false;
485 int64_t ms_elapsed
= timeval_ms() - ms_start
;
487 if (!man_reset_requested
&& ms_elapsed
> 100) {
488 LOG_INFO("MDM: Press RESET button now if possible.");
489 man_reset_requested
= true;
492 if (ms_elapsed
> 3000) {
493 LOG_ERROR("MDM: waiting for mass erase conditions timed out.");
494 LOG_INFO("Mass erase of a secured MCU is not possible without hardware reset.");
495 LOG_INFO("Connect SRST, use 'reset_config srst_only' and retry.");
496 goto deassert_reset_and_exit
;
498 retval
= kinetis_mdm_read_register(dap
, MDM_REG_STAT
, &stat
);
499 if (retval
!= ERROR_OK
) {
504 if (!(stat
& MDM_STAT_FMEEN
)) {
506 cnt_mass_erase_disabled
++;
507 if (cnt_mass_erase_disabled
> 10) {
508 LOG_ERROR("MDM: mass erase is disabled");
509 goto deassert_reset_and_exit
;
514 if ((stat
& (MDM_STAT_FREADY
| MDM_STAT_SYSRES
)) == MDM_STAT_FREADY
)
519 } while (cnt_ready
< 32);
522 * ... Write the MDM-AP control register to set the Flash Mass
523 * Erase in Progress bit. This will start the mass erase
526 retval
= kinetis_mdm_write_register(dap
, MDM_REG_CTRL
, MDM_CTRL_SYS_RES_REQ
| MDM_CTRL_FMEIP
);
527 if (retval
!= ERROR_OK
) {
528 LOG_ERROR("MDM: failed to start mass erase");
529 goto deassert_reset_and_exit
;
533 * ... Read the MDM-AP control register until the Flash Mass
534 * Erase in Progress bit clears...
535 * Data sheed defines erase time <3.6 sec/512kB flash block.
536 * The biggest device has 4 pflash blocks => timeout 16 sec.
538 retval
= kinetis_mdm_poll_register(dap
, MDM_REG_CTRL
, MDM_CTRL_FMEIP
, 0, 16000);
539 if (retval
!= ERROR_OK
) {
540 LOG_ERROR("MDM: mass erase timeout");
541 goto deassert_reset_and_exit
;
545 /* enable polling in case kinetis_check_flash_security_status disabled it */
546 jtag_poll_set_enabled(true);
550 target
->reset_halt
= true;
551 target
->type
->assert_reset(target
);
554 * ... Negate the RESET signal or clear the System Reset Request
555 * bit in the MDM-AP control register.
557 retval
= kinetis_mdm_write_register(dap
, MDM_REG_CTRL
, 0);
558 if (retval
!= ERROR_OK
)
559 LOG_ERROR("MDM: failed to clear MDM_REG_CTRL");
561 target
->type
->deassert_reset(target
);
565 deassert_reset_and_exit
:
566 kinetis_mdm_write_register(dap
, MDM_REG_CTRL
, 0);
568 adapter_deassert_reset();
572 static const uint32_t kinetis_known_mdm_ids
[] = {
573 0x001C0000, /* Kinetis-K Series */
574 0x001C0020, /* Kinetis-L/M/V/E Series */
578 * This function implements the procedure to connect to
579 * SWD/JTAG on Kinetis K and L series of devices as it is described in
580 * AN4835 "Production Flash Programming Best Practices for Kinetis K-
581 * and L-series MCUs" Section 4.1.1
583 COMMAND_HANDLER(kinetis_check_flash_security_status
)
585 struct target
*target
= get_current_target(CMD_CTX
);
586 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
587 struct adiv5_dap
*dap
= cortex_m
->armv7m
.arm
.dap
;
590 LOG_WARNING("Cannot check flash security status with a high-level adapter");
598 * ... The MDM-AP ID register can be read to verify that the
599 * connection is working correctly...
601 retval
= kinetis_mdm_read_register(dap
, MDM_REG_ID
, &val
);
602 if (retval
!= ERROR_OK
) {
603 LOG_ERROR("MDM: failed to read ID register");
611 for (size_t i
= 0; i
< ARRAY_SIZE(kinetis_known_mdm_ids
); i
++) {
612 if (val
== kinetis_known_mdm_ids
[i
]) {
619 LOG_WARNING("MDM: unknown ID %08" PRIX32
, val
);
622 * ... Read the System Security bit to determine if security is enabled.
623 * If System Security = 0, then proceed. If System Security = 1, then
624 * communication with the internals of the processor, including the
625 * flash, will not be possible without issuing a mass erase command or
626 * unsecuring the part through other means (backdoor key unlock)...
628 retval
= kinetis_mdm_read_register(dap
, MDM_REG_STAT
, &val
);
629 if (retval
!= ERROR_OK
) {
630 LOG_ERROR("MDM: failed to read MDM_REG_STAT");
635 * System Security bit is also active for short time during reset.
636 * If a MCU has blank flash and runs in RESET/WDOG loop,
637 * System Security bit is active most of time!
638 * We should observe Flash Ready bit and read status several times
639 * to avoid false detection of secured MCU
641 int secured_score
= 0, flash_not_ready_score
= 0;
643 if ((val
& (MDM_STAT_SYSSEC
| MDM_STAT_FREADY
)) != MDM_STAT_FREADY
) {
647 for (i
= 0; i
< 32; i
++) {
648 stats
[i
] = MDM_STAT_FREADY
;
649 dap_queue_ap_read(dap_ap(dap
, MDM_AP
), MDM_REG_STAT
, &stats
[i
]);
651 retval
= dap_run(dap
);
652 if (retval
!= ERROR_OK
) {
653 LOG_DEBUG("MDM: dap_run failed when validating secured state");
656 for (i
= 0; i
< 32; i
++) {
657 if (stats
[i
] & MDM_STAT_SYSSEC
)
659 if (!(stats
[i
] & MDM_STAT_FREADY
))
660 flash_not_ready_score
++;
664 if (flash_not_ready_score
<= 8 && secured_score
> 24) {
665 jtag_poll_set_enabled(false);
667 LOG_WARNING("*********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********");
668 LOG_WARNING("**** ****");
669 LOG_WARNING("**** Your Kinetis MCU is in secured state, which means that, ****");
670 LOG_WARNING("**** with exception for very basic communication, JTAG/SWD ****");
671 LOG_WARNING("**** interface will NOT work. In order to restore its ****");
672 LOG_WARNING("**** functionality please issue 'kinetis mdm mass_erase' ****");
673 LOG_WARNING("**** command, power cycle the MCU and restart OpenOCD. ****");
674 LOG_WARNING("**** ****");
675 LOG_WARNING("*********** ATTENTION! ATTENTION! ATTENTION! ATTENTION! **********");
677 } else if (flash_not_ready_score
> 24) {
678 jtag_poll_set_enabled(false);
679 LOG_WARNING("**** Your Kinetis MCU is probably locked-up in RESET/WDOG loop. ****");
680 LOG_WARNING("**** Common reason is a blank flash (at least a reset vector). ****");
681 LOG_WARNING("**** Issue 'kinetis mdm halt' command or if SRST is connected ****");
682 LOG_WARNING("**** and configured, use 'reset halt' ****");
683 LOG_WARNING("**** If MCU cannot be halted, it is likely secured and running ****");
684 LOG_WARNING("**** in RESET/WDOG loop. Issue 'kinetis mdm mass_erase' ****");
687 LOG_INFO("MDM: Chip is unsecured. Continuing.");
688 jtag_poll_set_enabled(true);
694 FLASH_BANK_COMMAND_HANDLER(kinetis_flash_bank_command
)
696 struct kinetis_flash_bank
*bank_info
;
699 return ERROR_COMMAND_SYNTAX_ERROR
;
701 LOG_INFO("add flash_bank kinetis %s", bank
->name
);
703 bank_info
= malloc(sizeof(struct kinetis_flash_bank
));
705 memset(bank_info
, 0, sizeof(struct kinetis_flash_bank
));
707 bank
->driver_priv
= bank_info
;
712 /* Disable the watchdog on Kinetis devices */
713 int kinetis_disable_wdog(struct target
*target
, uint32_t sim_sdid
)
715 struct working_area
*wdog_algorithm
;
716 struct armv7m_algorithm armv7m_info
;
720 static const uint8_t kinetis_unlock_wdog_code
[] = {
721 #include "../../../contrib/loaders/watchdog/armv7m_kinetis_wdog.inc"
724 /* Decide whether the connected device needs watchdog disabling.
725 * Disable for all Kx and KVx devices, return if it is a KLx */
727 if ((sim_sdid
& KINETIS_SDID_SERIESID_MASK
) == KINETIS_SDID_SERIESID_KL
)
730 /* The connected device requires watchdog disabling. */
731 retval
= target_read_u16(target
, WDOG_STCTRH
, &wdog
);
732 if (retval
!= ERROR_OK
)
735 if ((wdog
& 0x1) == 0) {
736 /* watchdog already disabled */
739 LOG_INFO("Disabling Kinetis watchdog (initial WDOG_STCTRLH = 0x%x)", wdog
);
741 if (target
->state
!= TARGET_HALTED
) {
742 LOG_ERROR("Target not halted");
743 return ERROR_TARGET_NOT_HALTED
;
746 retval
= target_alloc_working_area(target
, sizeof(kinetis_unlock_wdog_code
), &wdog_algorithm
);
747 if (retval
!= ERROR_OK
)
750 retval
= target_write_buffer(target
, wdog_algorithm
->address
,
751 sizeof(kinetis_unlock_wdog_code
), (uint8_t *)kinetis_unlock_wdog_code
);
752 if (retval
!= ERROR_OK
) {
753 target_free_working_area(target
, wdog_algorithm
);
757 armv7m_info
.common_magic
= ARMV7M_COMMON_MAGIC
;
758 armv7m_info
.core_mode
= ARM_MODE_THREAD
;
760 retval
= target_run_algorithm(target
, 0, NULL
, 0, NULL
, wdog_algorithm
->address
,
761 wdog_algorithm
->address
+ (sizeof(kinetis_unlock_wdog_code
) - 2),
762 10000, &armv7m_info
);
764 if (retval
!= ERROR_OK
)
765 LOG_ERROR("error executing kinetis wdog unlock algorithm");
767 retval
= target_read_u16(target
, WDOG_STCTRH
, &wdog
);
768 if (retval
!= ERROR_OK
)
770 LOG_INFO("WDOG_STCTRLH = 0x%x", wdog
);
772 target_free_working_area(target
, wdog_algorithm
);
777 COMMAND_HANDLER(kinetis_disable_wdog_handler
)
781 struct target
*target
= get_current_target(CMD_CTX
);
784 return ERROR_COMMAND_SYNTAX_ERROR
;
786 result
= target_read_u32(target
, SIM_SDID
, &sim_sdid
);
787 if (result
!= ERROR_OK
) {
788 LOG_ERROR("Failed to read SIMSDID");
792 result
= kinetis_disable_wdog(target
, sim_sdid
);
797 /* Kinetis Program-LongWord Microcodes */
798 static const uint8_t kinetis_flash_write_code
[] = {
800 * r0 - workarea buffer
801 * r1 - target address
811 /* for(register uint32_t i=0;i<wcount;i++){ */
812 0x04, 0x1C, /* mov r4, r0 */
813 0x00, 0x23, /* mov r3, #0 */
815 0x0E, 0x1A, /* sub r6, r1, r0 */
816 0xA6, 0x19, /* add r6, r4, r6 */
817 0x93, 0x42, /* cmp r3, r2 */
818 0x16, 0xD0, /* beq .L9 */
820 /* while((FTFx_FSTAT&FTFA_FSTAT_CCIF_MASK) != FTFA_FSTAT_CCIF_MASK){}; */
821 0x0B, 0x4D, /* ldr r5, .L10 */
822 0x2F, 0x78, /* ldrb r7, [r5] */
823 0x7F, 0xB2, /* sxtb r7, r7 */
824 0x00, 0x2F, /* cmp r7, #0 */
825 0xFA, 0xDA, /* bge .L5 */
826 /* FTFx_FSTAT = FTFA_FSTAT_ACCERR_MASK|FTFA_FSTAT_FPVIOL_MASK|FTFA_FSTAT_RDCO */
827 0x70, 0x27, /* mov r7, #112 */
828 0x2F, 0x70, /* strb r7, [r5] */
829 /* FTFx_FCCOB3 = faddr; */
830 0x09, 0x4F, /* ldr r7, .L10+4 */
831 0x3E, 0x60, /* str r6, [r7] */
832 0x06, 0x27, /* mov r7, #6 */
833 /* FTFx_FCCOB0 = 0x06; */
834 0x08, 0x4E, /* ldr r6, .L10+8 */
835 0x37, 0x70, /* strb r7, [r6] */
836 /* FTFx_FCCOB7 = *pLW; */
837 0x80, 0xCC, /* ldmia r4!, {r7} */
838 0x08, 0x4E, /* ldr r6, .L10+12 */
839 0x37, 0x60, /* str r7, [r6] */
840 /* FTFx_FSTAT = FTFA_FSTAT_CCIF_MASK; */
841 0x80, 0x27, /* mov r7, #128 */
842 0x2F, 0x70, /* strb r7, [r5] */
844 /* while((FTFx_FSTAT&FTFA_FSTAT_CCIF_MASK) != FTFA_FSTAT_CCIF_MASK){}; */
845 0x2E, 0x78, /* ldrb r6, [r5] */
846 0x77, 0xB2, /* sxtb r7, r6 */
847 0x00, 0x2F, /* cmp r7, #0 */
848 0xFB, 0xDA, /* bge .L4 */
849 0x01, 0x33, /* add r3, r3, #1 */
850 0xE4, 0xE7, /* b .L2 */
852 0x00, 0xBE, /* bkpt #0 */
854 0x00, 0x00, 0x02, 0x40, /* .word 1073872896 */
855 0x04, 0x00, 0x02, 0x40, /* .word 1073872900 */
856 0x07, 0x00, 0x02, 0x40, /* .word 1073872903 */
857 0x08, 0x00, 0x02, 0x40, /* .word 1073872904 */
860 /* Program LongWord Block Write */
861 static int kinetis_write_block(struct flash_bank
*bank
, const uint8_t *buffer
,
862 uint32_t offset
, uint32_t wcount
)
864 struct target
*target
= bank
->target
;
865 uint32_t buffer_size
= 2048; /* Default minimum value */
866 struct working_area
*write_algorithm
;
867 struct working_area
*source
;
868 struct kinetis_flash_bank
*kinfo
= bank
->driver_priv
;
869 uint32_t address
= kinfo
->prog_base
+ offset
;
870 struct reg_param reg_params
[3];
871 struct armv7m_algorithm armv7m_info
;
872 int retval
= ERROR_OK
;
875 * r0 - workarea buffer
876 * r1 - target address
885 /* Increase buffer_size if needed */
886 if (buffer_size
< (target
->working_area_size
/2))
887 buffer_size
= (target
->working_area_size
/2);
889 LOG_INFO("Kinetis: FLASH Write ...");
891 /* check code alignment */
893 LOG_WARNING("offset 0x%" PRIx32
" breaks required 2-byte alignment", offset
);
894 return ERROR_FLASH_DST_BREAKS_ALIGNMENT
;
897 /* allocate working area with flash programming code */
898 if (target_alloc_working_area(target
, sizeof(kinetis_flash_write_code
),
899 &write_algorithm
) != ERROR_OK
) {
900 LOG_WARNING("no working area available, can't do block memory writes");
901 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
904 retval
= target_write_buffer(target
, write_algorithm
->address
,
905 sizeof(kinetis_flash_write_code
), kinetis_flash_write_code
);
906 if (retval
!= ERROR_OK
)
910 while (target_alloc_working_area(target
, buffer_size
, &source
) != ERROR_OK
) {
912 if (buffer_size
<= 256) {
913 /* free working area, write algorithm already allocated */
914 target_free_working_area(target
, write_algorithm
);
916 LOG_WARNING("No large enough working area available, can't do block memory writes");
917 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
921 armv7m_info
.common_magic
= ARMV7M_COMMON_MAGIC
;
922 armv7m_info
.core_mode
= ARM_MODE_THREAD
;
924 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
); /* *pLW (*buffer) */
925 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
); /* faddr */
926 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
); /* number of words to program */
928 /* write code buffer and use Flash programming code within kinetis */
929 /* Set breakpoint to 0 with time-out of 1000 ms */
931 uint32_t thisrun_count
= (wcount
> (buffer_size
/ 4)) ? (buffer_size
/ 4) : wcount
;
933 retval
= target_write_buffer(target
, source
->address
, thisrun_count
* 4, buffer
);
934 if (retval
!= ERROR_OK
)
937 buf_set_u32(reg_params
[0].value
, 0, 32, source
->address
);
938 buf_set_u32(reg_params
[1].value
, 0, 32, address
);
939 buf_set_u32(reg_params
[2].value
, 0, 32, thisrun_count
);
941 retval
= target_run_algorithm(target
, 0, NULL
, 3, reg_params
,
942 write_algorithm
->address
, 0, 100000, &armv7m_info
);
943 if (retval
!= ERROR_OK
) {
944 LOG_ERROR("Error executing kinetis Flash programming algorithm");
945 retval
= ERROR_FLASH_OPERATION_FAILED
;
949 buffer
+= thisrun_count
* 4;
950 address
+= thisrun_count
* 4;
951 wcount
-= thisrun_count
;
954 target_free_working_area(target
, source
);
955 target_free_working_area(target
, write_algorithm
);
957 destroy_reg_param(®_params
[0]);
958 destroy_reg_param(®_params
[1]);
959 destroy_reg_param(®_params
[2]);
964 static int kinetis_protect(struct flash_bank
*bank
, int set
, int first
, int last
)
966 LOG_WARNING("kinetis_protect not supported yet");
969 if (bank
->target
->state
!= TARGET_HALTED
) {
970 LOG_ERROR("Target not halted");
971 return ERROR_TARGET_NOT_HALTED
;
974 return ERROR_FLASH_BANK_INVALID
;
977 static int kinetis_protect_check(struct flash_bank
*bank
)
979 struct kinetis_flash_bank
*kinfo
= bank
->driver_priv
;
982 uint32_t fprot
, psec
;
984 if (bank
->target
->state
!= TARGET_HALTED
) {
985 LOG_ERROR("Target not halted");
986 return ERROR_TARGET_NOT_HALTED
;
989 if (kinfo
->flash_class
== FC_PFLASH
) {
992 /* read protection register */
993 result
= target_read_memory(bank
->target
, FTFx_FPROT3
, 1, 4, buffer
);
995 if (result
!= ERROR_OK
)
998 fprot
= target_buffer_get_u32(bank
->target
, buffer
);
999 /* Every bit protects 1/32 of the full flash (not necessarily just this bank) */
1001 } else if (kinfo
->flash_class
== FC_FLEX_NVM
) {
1004 /* read protection register */
1005 result
= target_read_memory(bank
->target
, FTFx_FDPROT
, 1, 1, &fdprot
);
1007 if (result
!= ERROR_OK
)
1013 LOG_ERROR("Protection checks for FlexRAM not supported");
1014 return ERROR_FLASH_BANK_INVALID
;
1017 b
= kinfo
->protection_block
;
1018 for (psec
= 0, i
= 0; i
< bank
->num_sectors
; i
++) {
1019 if ((fprot
>> b
) & 1)
1020 bank
->sectors
[i
].is_protected
= 0;
1022 bank
->sectors
[i
].is_protected
= 1;
1024 psec
+= bank
->sectors
[i
].size
;
1026 if (psec
>= kinfo
->protection_size
) {
1035 static int kinetis_ftfx_command(struct target
*target
, uint8_t fcmd
, uint32_t faddr
,
1036 uint8_t fccob4
, uint8_t fccob5
, uint8_t fccob6
, uint8_t fccob7
,
1037 uint8_t fccob8
, uint8_t fccob9
, uint8_t fccoba
, uint8_t fccobb
,
1038 uint8_t *ftfx_fstat
)
1040 uint8_t command
[12] = {faddr
& 0xff, (faddr
>> 8) & 0xff, (faddr
>> 16) & 0xff, fcmd
,
1041 fccob7
, fccob6
, fccob5
, fccob4
,
1042 fccobb
, fccoba
, fccob9
, fccob8
};
1045 int64_t ms_timeout
= timeval_ms() + 250;
1048 for (i
= 0; i
< 50; i
++) {
1050 target_read_memory(target
, FTFx_FSTAT
, 1, 1, &buffer
);
1052 if (result
!= ERROR_OK
)
1061 if (buffer
!= 0x80) {
1062 /* reset error flags */
1065 target_write_memory(target
, FTFx_FSTAT
, 1, 1, &buffer
);
1066 if (result
!= ERROR_OK
)
1070 result
= target_write_memory(target
, FTFx_FCCOB3
, 4, 3, command
);
1072 if (result
!= ERROR_OK
)
1077 result
= target_write_memory(target
, FTFx_FSTAT
, 1, 1, &buffer
);
1078 if (result
!= ERROR_OK
)
1084 target_read_memory(target
, FTFx_FSTAT
, 1, 1, ftfx_fstat
);
1086 if (result
!= ERROR_OK
)
1089 if (*ftfx_fstat
& 0x80)
1092 } while (timeval_ms() < ms_timeout
);
1094 if ((*ftfx_fstat
& 0xf0) != 0x80) {
1096 ("ftfx command failed FSTAT: %02X FCCOB: %02X%02X%02X%02X %02X%02X%02X%02X %02X%02X%02X%02X",
1097 *ftfx_fstat
, command
[3], command
[2], command
[1], command
[0],
1098 command
[7], command
[6], command
[5], command
[4],
1099 command
[11], command
[10], command
[9], command
[8]);
1100 return ERROR_FLASH_OPERATION_FAILED
;
1107 static int kinetis_check_run_mode(struct target
*target
)
1110 uint8_t pmctrl
, pmstat
;
1112 if (target
->state
!= TARGET_HALTED
) {
1113 LOG_ERROR("Target not halted");
1114 return ERROR_TARGET_NOT_HALTED
;
1117 result
= target_read_u8(target
, SMC_PMSTAT
, &pmstat
);
1118 if (result
!= ERROR_OK
)
1121 if (pmstat
== PM_STAT_RUN
)
1124 if (pmstat
== PM_STAT_VLPR
) {
1125 /* It is safe to switch from VLPR to RUN mode without changing clock */
1126 LOG_INFO("Switching from VLPR to RUN mode.");
1127 pmctrl
= PM_CTRL_RUNM_RUN
;
1128 result
= target_write_u8(target
, SMC_PMCTRL
, pmctrl
);
1129 if (result
!= ERROR_OK
)
1132 for (i
= 100; i
; i
--) {
1133 result
= target_read_u8(target
, SMC_PMSTAT
, &pmstat
);
1134 if (result
!= ERROR_OK
)
1137 if (pmstat
== PM_STAT_RUN
)
1142 LOG_ERROR("Flash operation not possible in current run mode: SMC_PMSTAT: 0x%x", pmstat
);
1143 LOG_ERROR("Issue a 'reset init' command.");
1144 return ERROR_TARGET_NOT_HALTED
;
1148 static void kinetis_invalidate_flash_cache(struct flash_bank
*bank
)
1150 struct kinetis_flash_bank
*kinfo
= bank
->driver_priv
;
1151 uint8_t pfb01cr_byte2
= 0xf0;
1153 if (!(kinfo
->flash_support
& FS_INVALIDATE_CACHE
))
1156 target_write_memory(bank
->target
, FMC_PFB01CR
+ 2, 1, 1, &pfb01cr_byte2
);
1161 static int kinetis_erase(struct flash_bank
*bank
, int first
, int last
)
1164 struct kinetis_flash_bank
*kinfo
= bank
->driver_priv
;
1166 result
= kinetis_check_run_mode(bank
->target
);
1167 if (result
!= ERROR_OK
)
1170 if ((first
> bank
->num_sectors
) || (last
> bank
->num_sectors
))
1171 return ERROR_FLASH_OPERATION_FAILED
;
1174 * FIXME: TODO: use the 'Erase Flash Block' command if the
1175 * requested erase is PFlash or NVM and encompasses the entire
1176 * block. Should be quicker.
1178 for (i
= first
; i
<= last
; i
++) {
1180 /* set command and sector address */
1181 result
= kinetis_ftfx_command(bank
->target
, FTFx_CMD_SECTERASE
, kinfo
->prog_base
+ bank
->sectors
[i
].offset
,
1182 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat
);
1184 if (result
!= ERROR_OK
) {
1185 LOG_WARNING("erase sector %d failed", i
);
1186 return ERROR_FLASH_OPERATION_FAILED
;
1189 bank
->sectors
[i
].is_erased
= 1;
1192 kinetis_invalidate_flash_cache(bank
);
1196 ("flash configuration field erased, please reset the device");
1202 static int kinetis_make_ram_ready(struct target
*target
)
1208 /* check if ram ready */
1209 result
= target_read_memory(target
, FTFx_FCNFG
, 1, 1, &ftfx_fcnfg
);
1210 if (result
!= ERROR_OK
)
1213 if (ftfx_fcnfg
& (1 << 1))
1214 return ERROR_OK
; /* ram ready */
1216 /* make flex ram available */
1217 result
= kinetis_ftfx_command(target
, FTFx_CMD_SETFLEXRAM
, 0x00ff0000,
1218 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat
);
1219 if (result
!= ERROR_OK
)
1220 return ERROR_FLASH_OPERATION_FAILED
;
1223 result
= target_read_memory(target
, FTFx_FCNFG
, 1, 1, &ftfx_fcnfg
);
1224 if (result
!= ERROR_OK
)
1227 if (ftfx_fcnfg
& (1 << 1))
1228 return ERROR_OK
; /* ram ready */
1230 return ERROR_FLASH_OPERATION_FAILED
;
1233 static int kinetis_write(struct flash_bank
*bank
, const uint8_t *buffer
,
1234 uint32_t offset
, uint32_t count
)
1236 unsigned int i
, result
, fallback
= 0;
1238 struct kinetis_flash_bank
*kinfo
= bank
->driver_priv
;
1239 uint8_t *new_buffer
= NULL
;
1241 result
= kinetis_check_run_mode(bank
->target
);
1242 if (result
!= ERROR_OK
)
1245 if (!(kinfo
->flash_support
& FS_PROGRAM_SECTOR
)) {
1246 /* fallback to longword write */
1248 LOG_WARNING("This device supports Program Longword execution only.");
1250 result
= kinetis_make_ram_ready(bank
->target
);
1251 if (result
!= ERROR_OK
) {
1253 LOG_WARNING("FlexRAM not ready, fallback to slow longword write.");
1257 LOG_DEBUG("flash write @08%" PRIX32
, offset
);
1260 /* program section command */
1261 if (fallback
== 0) {
1263 * Kinetis uses different terms for the granularity of
1264 * sector writes, e.g. "phrase" or "128 bits". We use
1265 * the generic term "chunk". The largest possible
1266 * Kinetis "chunk" is 16 bytes (128 bits).
1268 unsigned prog_section_chunk_bytes
= kinfo
->sector_size
>> 8;
1269 unsigned prog_size_bytes
= kinfo
->max_flash_prog_size
;
1270 for (i
= 0; i
< count
; i
+= prog_size_bytes
) {
1271 uint8_t residual_buffer
[16];
1273 uint32_t section_count
= prog_size_bytes
/ prog_section_chunk_bytes
;
1274 uint32_t residual_wc
= 0;
1277 * Assume the word count covers an entire
1280 wc
= prog_size_bytes
/ 4;
1283 * If bytes to be programmed are less than the
1284 * full sector, then determine the number of
1285 * full-words to program, and put together the
1286 * residual buffer so that a full "section"
1287 * may always be programmed.
1289 if ((count
- i
) < prog_size_bytes
) {
1290 /* number of bytes to program beyond full section */
1291 unsigned residual_bc
= (count
-i
) % prog_section_chunk_bytes
;
1293 /* number of complete words to copy directly from buffer */
1294 wc
= (count
- i
- residual_bc
) / 4;
1296 /* number of total sections to write, including residual */
1297 section_count
= DIV_ROUND_UP((count
-i
), prog_section_chunk_bytes
);
1299 /* any residual bytes delivers a whole residual section */
1300 residual_wc
= (residual_bc
? prog_section_chunk_bytes
: 0)/4;
1302 /* clear residual buffer then populate residual bytes */
1303 (void) memset(residual_buffer
, 0xff, prog_section_chunk_bytes
);
1304 (void) memcpy(residual_buffer
, &buffer
[i
+4*wc
], residual_bc
);
1307 LOG_DEBUG("write section @ %08" PRIX32
" with length %" PRIu32
" bytes",
1308 offset
+ i
, (uint32_t)wc
*4);
1310 /* write data to flexram as whole-words */
1311 result
= target_write_memory(bank
->target
, FLEXRAM
, 4, wc
,
1314 if (result
!= ERROR_OK
) {
1315 LOG_ERROR("target_write_memory failed");
1319 /* write the residual words to the flexram */
1321 result
= target_write_memory(bank
->target
,
1326 if (result
!= ERROR_OK
) {
1327 LOG_ERROR("target_write_memory failed");
1332 /* execute section-write command */
1333 result
= kinetis_ftfx_command(bank
->target
, FTFx_CMD_SECTWRITE
, kinfo
->prog_base
+ offset
+ i
,
1334 section_count
>>8, section_count
, 0, 0,
1335 0, 0, 0, 0, &ftfx_fstat
);
1337 if (result
!= ERROR_OK
)
1338 return ERROR_FLASH_OPERATION_FAILED
;
1341 /* program longword command, not supported in "SF3" devices */
1342 else if (kinfo
->flash_support
& FS_PROGRAM_LONGWORD
) {
1344 uint32_t old_count
= count
;
1345 count
= (old_count
| 3) + 1;
1346 new_buffer
= malloc(count
);
1347 if (new_buffer
== NULL
) {
1348 LOG_ERROR("odd number of bytes to write and no memory "
1349 "for padding buffer");
1352 LOG_INFO("odd number of bytes to write (%" PRIu32
"), extending to %" PRIu32
" "
1353 "and padding with 0xff", old_count
, count
);
1354 memset(new_buffer
, 0xff, count
);
1355 buffer
= memcpy(new_buffer
, buffer
, old_count
);
1358 uint32_t words_remaining
= count
/ 4;
1360 kinetis_disable_wdog(bank
->target
, kinfo
->sim_sdid
);
1362 /* try using a block write */
1363 int retval
= kinetis_write_block(bank
, buffer
, offset
, words_remaining
);
1365 if (retval
== ERROR_TARGET_RESOURCE_NOT_AVAILABLE
) {
1366 /* if block write failed (no sufficient working area),
1367 * we use normal (slow) single word accesses */
1368 LOG_WARNING("couldn't use block writes, falling back to single "
1371 for (i
= 0; i
< count
; i
+= 4) {
1374 LOG_DEBUG("write longword @ %08" PRIX32
, (uint32_t)(offset
+ i
));
1376 uint8_t padding
[4] = {0xff, 0xff, 0xff, 0xff};
1377 memcpy(padding
, buffer
+ i
, MIN(4, count
-i
));
1379 result
= kinetis_ftfx_command(bank
->target
, FTFx_CMD_LWORDPROG
, kinfo
->prog_base
+ offset
+ i
,
1380 padding
[3], padding
[2], padding
[1], padding
[0],
1381 0, 0, 0, 0, &ftfx_fstat
);
1383 if (result
!= ERROR_OK
)
1384 return ERROR_FLASH_OPERATION_FAILED
;
1388 LOG_ERROR("Flash write strategy not implemented");
1389 return ERROR_FLASH_OPERATION_FAILED
;
1392 kinetis_invalidate_flash_cache(bank
);
1396 static int kinetis_probe(struct flash_bank
*bank
)
1399 uint32_t offset
= 0;
1400 uint8_t fcfg1_nvmsize
, fcfg1_pfsize
, fcfg1_eesize
, fcfg1_depart
;
1401 uint8_t fcfg2_maxaddr0
, fcfg2_pflsh
, fcfg2_maxaddr1
;
1402 uint32_t nvm_size
= 0, pf_size
= 0, df_size
= 0, ee_size
= 0;
1403 unsigned num_blocks
= 0, num_pflash_blocks
= 0, num_nvm_blocks
= 0, first_nvm_bank
= 0,
1404 pflash_sector_size_bytes
= 0, nvm_sector_size_bytes
= 0;
1405 struct target
*target
= bank
->target
;
1406 struct kinetis_flash_bank
*kinfo
= bank
->driver_priv
;
1408 kinfo
->probed
= false;
1410 result
= target_read_u32(target
, SIM_SDID
, &kinfo
->sim_sdid
);
1411 if (result
!= ERROR_OK
)
1414 if ((kinfo
->sim_sdid
& (~KINETIS_SDID_K_SERIES_MASK
)) == 0) {
1415 /* older K-series MCU */
1416 uint32_t mcu_type
= kinfo
->sim_sdid
& KINETIS_K_SDID_TYPE_MASK
;
1419 case KINETIS_K_SDID_K10_M50
:
1420 case KINETIS_K_SDID_K20_M50
:
1422 pflash_sector_size_bytes
= 1<<10;
1423 nvm_sector_size_bytes
= 1<<10;
1425 kinfo
->flash_support
= FS_PROGRAM_LONGWORD
| FS_PROGRAM_SECTOR
| FS_INVALIDATE_CACHE
;
1427 case KINETIS_K_SDID_K10_M72
:
1428 case KINETIS_K_SDID_K20_M72
:
1429 case KINETIS_K_SDID_K30_M72
:
1430 case KINETIS_K_SDID_K30_M100
:
1431 case KINETIS_K_SDID_K40_M72
:
1432 case KINETIS_K_SDID_K40_M100
:
1433 case KINETIS_K_SDID_K50_M72
:
1434 /* 2kB sectors, 1kB FlexNVM sectors */
1435 pflash_sector_size_bytes
= 2<<10;
1436 nvm_sector_size_bytes
= 1<<10;
1438 kinfo
->flash_support
= FS_PROGRAM_LONGWORD
| FS_PROGRAM_SECTOR
| FS_INVALIDATE_CACHE
;
1439 kinfo
->max_flash_prog_size
= 1<<10;
1441 case KINETIS_K_SDID_K10_M100
:
1442 case KINETIS_K_SDID_K20_M100
:
1443 case KINETIS_K_SDID_K11
:
1444 case KINETIS_K_SDID_K12
:
1445 case KINETIS_K_SDID_K21_M50
:
1446 case KINETIS_K_SDID_K22_M50
:
1447 case KINETIS_K_SDID_K51_M72
:
1448 case KINETIS_K_SDID_K53
:
1449 case KINETIS_K_SDID_K60_M100
:
1451 pflash_sector_size_bytes
= 2<<10;
1452 nvm_sector_size_bytes
= 2<<10;
1454 kinfo
->flash_support
= FS_PROGRAM_LONGWORD
| FS_PROGRAM_SECTOR
| FS_INVALIDATE_CACHE
;
1456 case KINETIS_K_SDID_K21_M120
:
1457 case KINETIS_K_SDID_K22_M120
:
1458 /* 4kB sectors (MK21FN1M0, MK21FX512, MK22FN1M0, MK22FX512) */
1459 pflash_sector_size_bytes
= 4<<10;
1460 kinfo
->max_flash_prog_size
= 1<<10;
1461 nvm_sector_size_bytes
= 4<<10;
1463 kinfo
->flash_support
= FS_PROGRAM_PHRASE
| FS_PROGRAM_SECTOR
| FS_INVALIDATE_CACHE
;
1465 case KINETIS_K_SDID_K10_M120
:
1466 case KINETIS_K_SDID_K20_M120
:
1467 case KINETIS_K_SDID_K60_M150
:
1468 case KINETIS_K_SDID_K70_M150
:
1470 pflash_sector_size_bytes
= 4<<10;
1471 nvm_sector_size_bytes
= 4<<10;
1473 kinfo
->flash_support
= FS_PROGRAM_PHRASE
| FS_PROGRAM_SECTOR
| FS_INVALIDATE_CACHE
;
1476 LOG_ERROR("Unsupported K-family FAMID");
1479 /* Newer K-series or KL series MCU */
1480 switch (kinfo
->sim_sdid
& KINETIS_SDID_SERIESID_MASK
) {
1481 case KINETIS_SDID_SERIESID_K
:
1482 switch (kinfo
->sim_sdid
& (KINETIS_SDID_FAMILYID_MASK
| KINETIS_SDID_SUBFAMID_MASK
)) {
1483 case KINETIS_SDID_FAMILYID_K0X
| KINETIS_SDID_SUBFAMID_KX2
:
1484 /* K02FN64, K02FN128: FTFA, 2kB sectors */
1485 pflash_sector_size_bytes
= 2<<10;
1487 kinfo
->flash_support
= FS_PROGRAM_LONGWORD
| FS_INVALIDATE_CACHE
;
1490 case KINETIS_SDID_FAMILYID_K2X
| KINETIS_SDID_SUBFAMID_KX2
: {
1491 /* MK24FN1M reports as K22, this should detect it (according to errata note 1N83J) */
1493 result
= target_read_u32(target
, SIM_SOPT1
, &sopt1
);
1494 if (result
!= ERROR_OK
)
1497 if (((kinfo
->sim_sdid
& (KINETIS_SDID_DIEID_MASK
)) == KINETIS_SDID_DIEID_K24FN1M
) &&
1498 ((sopt1
& KINETIS_SOPT1_RAMSIZE_MASK
) == KINETIS_SOPT1_RAMSIZE_K24FN1M
)) {
1500 pflash_sector_size_bytes
= 4<<10;
1502 kinfo
->flash_support
= FS_PROGRAM_PHRASE
| FS_PROGRAM_SECTOR
| FS_INVALIDATE_CACHE
;
1503 kinfo
->max_flash_prog_size
= 1<<10;
1506 if ((kinfo
->sim_sdid
& (KINETIS_SDID_DIEID_MASK
)) == KINETIS_SDID_DIEID_K22FN128
1507 || (kinfo
->sim_sdid
& (KINETIS_SDID_DIEID_MASK
)) == KINETIS_SDID_DIEID_K22FN256
1508 || (kinfo
->sim_sdid
& (KINETIS_SDID_DIEID_MASK
)) == KINETIS_SDID_DIEID_K22FN512
) {
1509 /* K22 with new-style SDID - smaller pflash with FTFA, 2kB sectors */
1510 pflash_sector_size_bytes
= 2<<10;
1511 /* autodetect 1 or 2 blocks */
1512 kinfo
->flash_support
= FS_PROGRAM_LONGWORD
| FS_INVALIDATE_CACHE
;
1515 LOG_ERROR("Unsupported Kinetis K22 DIEID");
1518 case KINETIS_SDID_FAMILYID_K2X
| KINETIS_SDID_SUBFAMID_KX4
:
1519 pflash_sector_size_bytes
= 4<<10;
1520 if ((kinfo
->sim_sdid
& (KINETIS_SDID_DIEID_MASK
)) == KINETIS_SDID_DIEID_K24FN256
) {
1521 /* K24FN256 - smaller pflash with FTFA */
1523 kinfo
->flash_support
= FS_PROGRAM_LONGWORD
| FS_INVALIDATE_CACHE
;
1526 /* K24FN1M without errata 7534 */
1528 kinfo
->flash_support
= FS_PROGRAM_PHRASE
| FS_PROGRAM_SECTOR
| FS_INVALIDATE_CACHE
;
1529 kinfo
->max_flash_prog_size
= 1<<10;
1532 case KINETIS_SDID_FAMILYID_K6X
| KINETIS_SDID_SUBFAMID_KX3
:
1533 case KINETIS_SDID_FAMILYID_K6X
| KINETIS_SDID_SUBFAMID_KX1
: /* errata 7534 - should be K63 */
1535 case KINETIS_SDID_FAMILYID_K6X
| KINETIS_SDID_SUBFAMID_KX4
:
1536 case KINETIS_SDID_FAMILYID_K6X
| KINETIS_SDID_SUBFAMID_KX2
: /* errata 7534 - should be K64 */
1537 /* K64FN1M0, K64FX512 */
1538 pflash_sector_size_bytes
= 4<<10;
1539 nvm_sector_size_bytes
= 4<<10;
1540 kinfo
->max_flash_prog_size
= 1<<10;
1542 kinfo
->flash_support
= FS_PROGRAM_PHRASE
| FS_PROGRAM_SECTOR
| FS_INVALIDATE_CACHE
;
1545 case KINETIS_SDID_FAMILYID_K2X
| KINETIS_SDID_SUBFAMID_KX6
:
1547 case KINETIS_SDID_FAMILYID_K6X
| KINETIS_SDID_SUBFAMID_KX6
:
1548 /* K66FN2M0, K66FX1M0 */
1549 pflash_sector_size_bytes
= 4<<10;
1550 nvm_sector_size_bytes
= 4<<10;
1551 kinfo
->max_flash_prog_size
= 1<<10;
1553 kinfo
->flash_support
= FS_PROGRAM_PHRASE
| FS_PROGRAM_SECTOR
| FS_INVALIDATE_CACHE
;
1556 LOG_ERROR("Unsupported Kinetis FAMILYID SUBFAMID");
1560 case KINETIS_SDID_SERIESID_KL
:
1562 pflash_sector_size_bytes
= 1<<10;
1563 nvm_sector_size_bytes
= 1<<10;
1564 /* autodetect 1 or 2 blocks */
1565 kinfo
->flash_support
= FS_PROGRAM_LONGWORD
;
1568 case KINETIS_SDID_SERIESID_KV
:
1570 switch (kinfo
->sim_sdid
& (KINETIS_SDID_FAMILYID_MASK
| KINETIS_SDID_SUBFAMID_MASK
)) {
1571 case KINETIS_SDID_FAMILYID_K1X
| KINETIS_SDID_SUBFAMID_KX0
:
1572 /* KV10: FTFA, 1kB sectors */
1573 pflash_sector_size_bytes
= 1<<10;
1575 kinfo
->flash_support
= FS_PROGRAM_LONGWORD
;
1578 case KINETIS_SDID_FAMILYID_K1X
| KINETIS_SDID_SUBFAMID_KX1
:
1579 /* KV11: FTFA, 2kB sectors */
1580 pflash_sector_size_bytes
= 2<<10;
1582 kinfo
->flash_support
= FS_PROGRAM_LONGWORD
;
1585 case KINETIS_SDID_FAMILYID_K3X
| KINETIS_SDID_SUBFAMID_KX0
:
1586 /* KV30: FTFA, 2kB sectors, 1 block */
1587 case KINETIS_SDID_FAMILYID_K3X
| KINETIS_SDID_SUBFAMID_KX1
:
1588 /* KV31: FTFA, 2kB sectors, 2 blocks */
1589 pflash_sector_size_bytes
= 2<<10;
1590 /* autodetect 1 or 2 blocks */
1591 kinfo
->flash_support
= FS_PROGRAM_LONGWORD
| FS_INVALIDATE_CACHE
;
1594 case KINETIS_SDID_FAMILYID_K4X
| KINETIS_SDID_SUBFAMID_KX2
:
1595 case KINETIS_SDID_FAMILYID_K4X
| KINETIS_SDID_SUBFAMID_KX4
:
1596 case KINETIS_SDID_FAMILYID_K4X
| KINETIS_SDID_SUBFAMID_KX6
:
1597 /* KV4x: FTFA, 4kB sectors */
1598 pflash_sector_size_bytes
= 4<<10;
1600 kinfo
->flash_support
= FS_PROGRAM_LONGWORD
| FS_INVALIDATE_CACHE
;
1604 LOG_ERROR("Unsupported KV FAMILYID SUBFAMID");
1609 LOG_ERROR("Unsupported K-series");
1613 if (pflash_sector_size_bytes
== 0) {
1614 LOG_ERROR("MCU is unsupported, SDID 0x%08" PRIx32
, kinfo
->sim_sdid
);
1615 return ERROR_FLASH_OPER_UNSUPPORTED
;
1618 result
= target_read_u32(target
, SIM_FCFG1
, &kinfo
->sim_fcfg1
);
1619 if (result
!= ERROR_OK
)
1622 result
= target_read_u32(target
, SIM_FCFG2
, &kinfo
->sim_fcfg2
);
1623 if (result
!= ERROR_OK
)
1626 LOG_DEBUG("SDID: 0x%08" PRIX32
" FCFG1: 0x%08" PRIX32
" FCFG2: 0x%08" PRIX32
, kinfo
->sim_sdid
,
1627 kinfo
->sim_fcfg1
, kinfo
->sim_fcfg2
);
1629 fcfg1_nvmsize
= (uint8_t)((kinfo
->sim_fcfg1
>> 28) & 0x0f);
1630 fcfg1_pfsize
= (uint8_t)((kinfo
->sim_fcfg1
>> 24) & 0x0f);
1631 fcfg1_eesize
= (uint8_t)((kinfo
->sim_fcfg1
>> 16) & 0x0f);
1632 fcfg1_depart
= (uint8_t)((kinfo
->sim_fcfg1
>> 8) & 0x0f);
1634 fcfg2_pflsh
= (uint8_t)((kinfo
->sim_fcfg2
>> 23) & 0x01);
1635 fcfg2_maxaddr0
= (uint8_t)((kinfo
->sim_fcfg2
>> 24) & 0x7f);
1636 fcfg2_maxaddr1
= (uint8_t)((kinfo
->sim_fcfg2
>> 16) & 0x7f);
1638 if (num_blocks
== 0)
1639 num_blocks
= fcfg2_maxaddr1
? 2 : 1;
1640 else if (fcfg2_maxaddr1
== 0 && num_blocks
>= 2) {
1642 LOG_WARNING("MAXADDR1 is zero, number of flash banks adjusted to 1");
1643 } else if (fcfg2_maxaddr1
!= 0 && num_blocks
== 1) {
1645 LOG_WARNING("MAXADDR1 is non zero, number of flash banks adjusted to 2");
1648 /* when the PFLSH bit is set, there is no FlexNVM/FlexRAM */
1650 switch (fcfg1_nvmsize
) {
1656 nvm_size
= 1 << (14 + (fcfg1_nvmsize
>> 1));
1659 if (pflash_sector_size_bytes
>= 4<<10)
1670 switch (fcfg1_eesize
) {
1681 ee_size
= (16 << (10 - fcfg1_eesize
));
1688 switch (fcfg1_depart
) {
1695 df_size
= nvm_size
- (4096 << fcfg1_depart
);
1705 df_size
= 4096 << (fcfg1_depart
& 0x7);
1713 switch (fcfg1_pfsize
) {
1720 pf_size
= 1 << (14 + (fcfg1_pfsize
>> 1));
1723 /* a peculiar case: Freescale states different sizes for 0xf
1724 * K02P64M100SFARM 128 KB ... duplicate of code 0x7
1725 * K22P121M120SF8RM 256 KB ... duplicate of code 0x9
1726 * K22P121M120SF7RM 512 KB ... duplicate of code 0xb
1727 * K22P100M120SF5RM 1024 KB ... duplicate of code 0xd
1728 * K26P169M180SF5RM 2048 KB ... the only unique value
1729 * fcfg2_maxaddr0 seems to be the only clue to pf_size
1730 * Checking fcfg2_maxaddr0 later in this routine is pointless then
1733 pf_size
= ((uint32_t)fcfg2_maxaddr0
<< 13) * num_blocks
;
1735 pf_size
= ((uint32_t)fcfg2_maxaddr0
<< 13) * num_blocks
/ 2;
1736 if (pf_size
!= 2048<<10)
1737 LOG_WARNING("SIM_FCFG1 PFSIZE = 0xf: please check if pflash is %u KB", pf_size
>>10);
1745 LOG_DEBUG("FlexNVM: %" PRIu32
" PFlash: %" PRIu32
" FlexRAM: %" PRIu32
" PFLSH: %d",
1746 nvm_size
, pf_size
, ee_size
, fcfg2_pflsh
);
1748 num_pflash_blocks
= num_blocks
/ (2 - fcfg2_pflsh
);
1749 first_nvm_bank
= num_pflash_blocks
;
1750 num_nvm_blocks
= num_blocks
- num_pflash_blocks
;
1752 LOG_DEBUG("%d blocks total: %d PFlash, %d FlexNVM",
1753 num_blocks
, num_pflash_blocks
, num_nvm_blocks
);
1755 LOG_INFO("Probing flash info for bank %d", bank
->bank_number
);
1757 if ((unsigned)bank
->bank_number
< num_pflash_blocks
) {
1758 /* pflash, banks start at address zero */
1759 kinfo
->flash_class
= FC_PFLASH
;
1760 bank
->size
= (pf_size
/ num_pflash_blocks
);
1761 bank
->base
= 0x00000000 + bank
->size
* bank
->bank_number
;
1762 kinfo
->prog_base
= bank
->base
;
1763 kinfo
->sector_size
= pflash_sector_size_bytes
;
1764 /* pflash is divided into 32 protection areas for
1765 * parts with more than 32K of PFlash. For parts with
1766 * less the protection unit is set to 1024 bytes */
1767 kinfo
->protection_size
= MAX(pf_size
/ 32, 1024);
1768 kinfo
->protection_block
= (32 / num_pflash_blocks
) * bank
->bank_number
;
1770 } else if ((unsigned)bank
->bank_number
< num_blocks
) {
1771 /* nvm, banks start at address 0x10000000 */
1772 unsigned nvm_ord
= bank
->bank_number
- first_nvm_bank
;
1775 kinfo
->flash_class
= FC_FLEX_NVM
;
1776 bank
->size
= (nvm_size
/ num_nvm_blocks
);
1777 bank
->base
= 0x10000000 + bank
->size
* nvm_ord
;
1778 kinfo
->prog_base
= 0x00800000 + bank
->size
* nvm_ord
;
1779 kinfo
->sector_size
= nvm_sector_size_bytes
;
1781 kinfo
->protection_size
= 0;
1783 for (i
= df_size
; ~i
& 1; i
>>= 1)
1786 kinfo
->protection_size
= df_size
/ 8; /* data flash size = 2^^n */
1788 kinfo
->protection_size
= nvm_size
/ 8; /* TODO: verify on SF1, not documented in RM */
1790 kinfo
->protection_block
= (8 / num_nvm_blocks
) * nvm_ord
;
1792 /* EEPROM backup part of FlexNVM is not accessible, use df_size as a limit */
1793 if (df_size
> bank
->size
* nvm_ord
)
1794 limit
= df_size
- bank
->size
* nvm_ord
;
1798 if (bank
->size
> limit
) {
1800 LOG_DEBUG("FlexNVM bank %d limited to 0x%08" PRIx32
" due to active EEPROM backup",
1801 bank
->bank_number
, limit
);
1804 } else if ((unsigned)bank
->bank_number
== num_blocks
) {
1805 LOG_ERROR("FlexRAM support not yet implemented");
1806 return ERROR_FLASH_OPER_UNSUPPORTED
;
1808 LOG_ERROR("Cannot determine parameters for bank %d, only %d banks on device",
1809 bank
->bank_number
, num_blocks
);
1810 return ERROR_FLASH_BANK_INVALID
;
1813 if (bank
->bank_number
== 0 && ((uint32_t)fcfg2_maxaddr0
<< 13) != bank
->size
)
1814 LOG_WARNING("MAXADDR0 0x%02" PRIx8
" check failed,"
1815 " please report to OpenOCD mailing list", fcfg2_maxaddr0
);
1817 if (bank
->bank_number
== 1 && ((uint32_t)fcfg2_maxaddr1
<< 13) != bank
->size
)
1818 LOG_WARNING("MAXADDR1 0x%02" PRIx8
" check failed,"
1819 " please report to OpenOCD mailing list", fcfg2_maxaddr1
);
1821 if ((unsigned)bank
->bank_number
== first_nvm_bank
1822 && ((uint32_t)fcfg2_maxaddr1
<< 13) != df_size
)
1823 LOG_WARNING("FlexNVM MAXADDR1 0x%02" PRIx8
" check failed,"
1824 " please report to OpenOCD mailing list", fcfg2_maxaddr1
);
1827 if (bank
->sectors
) {
1828 free(bank
->sectors
);
1829 bank
->sectors
= NULL
;
1832 if (kinfo
->sector_size
== 0) {
1833 LOG_ERROR("Unknown sector size for bank %d", bank
->bank_number
);
1834 return ERROR_FLASH_BANK_INVALID
;
1837 if (kinfo
->flash_support
& FS_PROGRAM_SECTOR
1838 && kinfo
->max_flash_prog_size
== 0) {
1839 kinfo
->max_flash_prog_size
= kinfo
->sector_size
;
1840 /* Program section size is equal to sector size by default */
1843 bank
->num_sectors
= bank
->size
/ kinfo
->sector_size
;
1845 if (bank
->num_sectors
> 0) {
1846 /* FlexNVM bank can be used for EEPROM backup therefore zero sized */
1847 bank
->sectors
= malloc(sizeof(struct flash_sector
) * bank
->num_sectors
);
1849 for (i
= 0; i
< bank
->num_sectors
; i
++) {
1850 bank
->sectors
[i
].offset
= offset
;
1851 bank
->sectors
[i
].size
= kinfo
->sector_size
;
1852 offset
+= kinfo
->sector_size
;
1853 bank
->sectors
[i
].is_erased
= -1;
1854 bank
->sectors
[i
].is_protected
= 1;
1858 kinfo
->probed
= true;
1863 static int kinetis_auto_probe(struct flash_bank
*bank
)
1865 struct kinetis_flash_bank
*kinfo
= bank
->driver_priv
;
1867 if (kinfo
&& kinfo
->probed
)
1870 return kinetis_probe(bank
);
1873 static int kinetis_info(struct flash_bank
*bank
, char *buf
, int buf_size
)
1875 const char *bank_class_names
[] = {
1876 "(ANY)", "PFlash", "FlexNVM", "FlexRAM"
1879 struct kinetis_flash_bank
*kinfo
= bank
->driver_priv
;
1881 (void) snprintf(buf
, buf_size
,
1882 "%s driver for %s flash bank %s at 0x%8.8" PRIx32
"",
1883 bank
->driver
->name
, bank_class_names
[kinfo
->flash_class
],
1884 bank
->name
, bank
->base
);
1889 static int kinetis_blank_check(struct flash_bank
*bank
)
1891 struct kinetis_flash_bank
*kinfo
= bank
->driver_priv
;
1894 /* suprisingly blank check does not work in VLPR and HSRUN modes */
1895 result
= kinetis_check_run_mode(bank
->target
);
1896 if (result
!= ERROR_OK
)
1899 if (kinfo
->flash_class
== FC_PFLASH
|| kinfo
->flash_class
== FC_FLEX_NVM
) {
1900 bool block_dirty
= false;
1903 if (kinfo
->flash_class
== FC_FLEX_NVM
) {
1904 uint8_t fcfg1_depart
= (uint8_t)((kinfo
->sim_fcfg1
>> 8) & 0x0f);
1905 /* block operation cannot be used on FlexNVM when EEPROM backup partition is set */
1906 if (fcfg1_depart
!= 0xf && fcfg1_depart
!= 0)
1911 /* check if whole bank is blank */
1912 result
= kinetis_ftfx_command(bank
->target
, FTFx_CMD_BLOCKSTAT
, kinfo
->prog_base
,
1913 0, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat
);
1915 if (result
!= ERROR_OK
|| (ftfx_fstat
& 0x01))
1920 /* the whole bank is not erased, check sector-by-sector */
1922 for (i
= 0; i
< bank
->num_sectors
; i
++) {
1924 result
= kinetis_ftfx_command(bank
->target
, FTFx_CMD_SECTSTAT
,
1925 kinfo
->prog_base
+ bank
->sectors
[i
].offset
,
1926 1, 0, 0, 0, 0, 0, 0, 0, &ftfx_fstat
);
1928 if (result
== ERROR_OK
) {
1929 bank
->sectors
[i
].is_erased
= !(ftfx_fstat
& 0x01);
1931 LOG_DEBUG("Ignoring errored PFlash sector blank-check");
1932 bank
->sectors
[i
].is_erased
= -1;
1936 /* the whole bank is erased, update all sectors */
1938 for (i
= 0; i
< bank
->num_sectors
; i
++)
1939 bank
->sectors
[i
].is_erased
= 1;
1942 LOG_WARNING("kinetis_blank_check not supported yet for FlexRAM");
1943 return ERROR_FLASH_OPERATION_FAILED
;
1950 COMMAND_HANDLER(kinetis_nvm_partition
)
1953 unsigned long par
, log2
= 0, ee1
= 0, ee2
= 0;
1954 enum { SHOW_INFO
, DF_SIZE
, EEBKP_SIZE
} sz_type
= SHOW_INFO
;
1957 uint8_t load_flex_ram
= 1;
1958 uint8_t ee_size_code
= 0x3f;
1959 uint8_t flex_nvm_partition_code
= 0;
1960 uint8_t ee_split
= 3;
1961 struct target
*target
= get_current_target(CMD_CTX
);
1962 struct flash_bank
*bank
;
1963 struct kinetis_flash_bank
*kinfo
;
1966 if (CMD_ARGC
>= 2) {
1967 if (strcmp(CMD_ARGV
[0], "dataflash") == 0)
1969 else if (strcmp(CMD_ARGV
[0], "eebkp") == 0)
1970 sz_type
= EEBKP_SIZE
;
1972 par
= strtoul(CMD_ARGV
[1], NULL
, 10);
1973 while (par
>> (log2
+ 3))
1978 result
= target_read_u32(target
, SIM_FCFG1
, &sim_fcfg1
);
1979 if (result
!= ERROR_OK
)
1982 flex_nvm_partition_code
= (uint8_t)((sim_fcfg1
>> 8) & 0x0f);
1983 switch (flex_nvm_partition_code
) {
1985 command_print(CMD_CTX
, "No EEPROM backup, data flash only");
1993 command_print(CMD_CTX
, "EEPROM backup %d KB", 4 << flex_nvm_partition_code
);
1996 command_print(CMD_CTX
, "No data flash, EEPROM backup only");
2004 command_print(CMD_CTX
, "data flash %d KB", 4 << (flex_nvm_partition_code
& 7));
2007 command_print(CMD_CTX
, "No EEPROM backup, data flash only (DEPART not set)");
2010 command_print(CMD_CTX
, "Unsupported EEPROM backup size code 0x%02" PRIx8
, flex_nvm_partition_code
);
2015 flex_nvm_partition_code
= 0x8 | log2
;
2019 flex_nvm_partition_code
= log2
;
2024 ee1
= ee2
= strtoul(CMD_ARGV
[2], NULL
, 10) / 2;
2025 else if (CMD_ARGC
>= 4) {
2026 ee1
= strtoul(CMD_ARGV
[2], NULL
, 10);
2027 ee2
= strtoul(CMD_ARGV
[3], NULL
, 10);
2030 enable
= ee1
+ ee2
> 0;
2032 for (log2
= 2; ; log2
++) {
2033 if (ee1
+ ee2
== (16u << 10) >> log2
)
2035 if (ee1
+ ee2
> (16u << 10) >> log2
|| log2
>= 9) {
2036 LOG_ERROR("Unsupported EEPROM size");
2037 return ERROR_FLASH_OPERATION_FAILED
;
2043 else if (ee1
* 7 == ee2
)
2045 else if (ee1
!= ee2
) {
2046 LOG_ERROR("Unsupported EEPROM sizes ratio");
2047 return ERROR_FLASH_OPERATION_FAILED
;
2050 ee_size_code
= log2
| ee_split
<< 4;
2054 COMMAND_PARSE_ON_OFF(CMD_ARGV
[4], enable
);
2058 LOG_INFO("DEPART 0x%" PRIx8
", EEPROM size code 0x%" PRIx8
,
2059 flex_nvm_partition_code
, ee_size_code
);
2061 result
= kinetis_check_run_mode(target
);
2062 if (result
!= ERROR_OK
)
2065 result
= kinetis_ftfx_command(target
, FTFx_CMD_PGMPART
, load_flex_ram
,
2066 ee_size_code
, flex_nvm_partition_code
, 0, 0,
2067 0, 0, 0, 0, &ftfx_fstat
);
2068 if (result
!= ERROR_OK
)
2071 command_print(CMD_CTX
, "FlexNVM partition set. Please reset MCU.");
2073 for (i
= 1; i
< 4; i
++) {
2074 bank
= get_flash_bank_by_num_noprobe(i
);
2078 kinfo
= bank
->driver_priv
;
2079 if (kinfo
&& kinfo
->flash_class
== FC_FLEX_NVM
)
2080 kinfo
->probed
= false; /* re-probe before next use */
2083 command_print(CMD_CTX
, "FlexNVM banks will be re-probed to set new data flash size.");
2088 static const struct command_registration kinetis_security_command_handlers
[] = {
2090 .name
= "check_security",
2091 .mode
= COMMAND_EXEC
,
2092 .help
= "Check status of device security lock",
2094 .handler
= kinetis_check_flash_security_status
,
2098 .mode
= COMMAND_EXEC
,
2099 .help
= "Issue a halt via the MDM-AP",
2101 .handler
= kinetis_mdm_halt
,
2104 .name
= "mass_erase",
2105 .mode
= COMMAND_EXEC
,
2106 .help
= "Issue a complete flash erase via the MDM-AP",
2108 .handler
= kinetis_mdm_mass_erase
,
2111 .mode
= COMMAND_EXEC
,
2112 .help
= "Issue a reset via the MDM-AP",
2114 .handler
= kinetis_mdm_reset
,
2116 COMMAND_REGISTRATION_DONE
2119 static const struct command_registration kinetis_exec_command_handlers
[] = {
2122 .mode
= COMMAND_ANY
,
2123 .help
= "MDM-AP command group",
2125 .chain
= kinetis_security_command_handlers
,
2128 .name
= "disable_wdog",
2129 .mode
= COMMAND_EXEC
,
2130 .help
= "Disable the watchdog timer",
2132 .handler
= kinetis_disable_wdog_handler
,
2135 .name
= "nvm_partition",
2136 .mode
= COMMAND_EXEC
,
2137 .help
= "Show/set data flash or EEPROM backup size in kilobytes,"
2138 " set two EEPROM sizes in bytes and FlexRAM loading during reset",
2139 .usage
= "('info'|'dataflash' size|'eebkp' size) [eesize1 eesize2] ['on'|'off']",
2140 .handler
= kinetis_nvm_partition
,
2142 COMMAND_REGISTRATION_DONE
2145 static const struct command_registration kinetis_command_handler
[] = {
2148 .mode
= COMMAND_ANY
,
2149 .help
= "Kinetis flash controller commands",
2151 .chain
= kinetis_exec_command_handlers
,
2153 COMMAND_REGISTRATION_DONE
2158 struct flash_driver kinetis_flash
= {
2160 .commands
= kinetis_command_handler
,
2161 .flash_bank_command
= kinetis_flash_bank_command
,
2162 .erase
= kinetis_erase
,
2163 .protect
= kinetis_protect
,
2164 .write
= kinetis_write
,
2165 .read
= default_flash_read
,
2166 .probe
= kinetis_probe
,
2167 .auto_probe
= kinetis_auto_probe
,
2168 .erase_check
= kinetis_blank_check
,
2169 .protect_check
= kinetis_protect_check
,
2170 .info
= kinetis_info
,