1 /***************************************************************************
2 * Copyright (C) 2009 Zachary T Welch *
3 * zw@superlucidity.net *
5 * Copyright (C) 2007,2008,2009 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
8 * Copyright (C) 2009 SoftPLC Corporation *
12 * Copyright (C) 2005 by Dominic Rath *
13 * Dominic.Rath@gmx.de *
15 * This program is free software; you can redistribute it and/or modify *
16 * it under the terms of the GNU General Public License as published by *
17 * the Free Software Foundation; either version 2 of the License, or *
18 * (at your option) any later version. *
20 * This program is distributed in the hope that it will be useful, *
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
23 * GNU General Public License for more details. *
25 * You should have received a copy of the GNU General Public License *
26 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
27 ***************************************************************************/
35 #include "interface.h"
36 #include <transport/transport.h>
37 #include <helper/jep106.h>
38 #include "helper/system.h"
44 /* SVF and XSVF are higher level JTAG command sets (for boundary scan) */
46 #include "xsvf/xsvf.h"
48 /* ipdbg are utilities to debug IP-cores. It uses JTAG for transport. */
49 #include "server/ipdbg.h"
51 /** The number of JTAG queue flushes (for profiling and debugging purposes). */
52 static int jtag_flush_queue_count
;
54 /* Sleep this # of ms after flushing the queue */
55 static int jtag_flush_queue_sleep
;
57 static void jtag_add_scan_check(struct jtag_tap
*active
,
58 void (*jtag_add_scan
)(struct jtag_tap
*active
,
60 const struct scan_field
*in_fields
,
62 int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
);
65 * The jtag_error variable is set when an error occurs while executing
66 * the queue. Application code may set this using jtag_set_error(),
67 * when an error occurs during processing that should be reported during
68 * jtag_execute_queue().
70 * The value is set and cleared, but never read by normal application code.
72 * This value is returned (and cleared) by jtag_execute_queue().
74 static int jtag_error
= ERROR_OK
;
76 static const char *jtag_event_strings
[] = {
77 [JTAG_TRST_ASSERTED
] = "TAP reset",
78 [JTAG_TAP_EVENT_SETUP
] = "TAP setup",
79 [JTAG_TAP_EVENT_ENABLE
] = "TAP enabled",
80 [JTAG_TAP_EVENT_DISABLE
] = "TAP disabled",
84 * JTAG adapters must initialize with TRST and SRST de-asserted
85 * (they're negative logic, so that means *high*). But some
86 * hardware doesn't necessarily work that way ... so set things
87 * up so that jtag_init() always forces that state.
89 static int jtag_trst
= -1;
90 static int jtag_srst
= -1;
93 * List all TAPs that have been created.
95 static struct jtag_tap
*__jtag_all_taps
;
97 static enum reset_types jtag_reset_config
= RESET_NONE
;
98 tap_state_t cmd_queue_cur_state
= TAP_RESET
;
100 static bool jtag_verify_capture_ir
= true;
101 static int jtag_verify
= 1;
103 /* how long the OpenOCD should wait before attempting JTAG communication after reset lines
104 *deasserted (in ms) */
105 static int adapter_nsrst_delay
; /* default to no nSRST delay */
106 static int jtag_ntrst_delay
;/* default to no nTRST delay */
107 static int adapter_nsrst_assert_width
; /* width of assertion */
108 static int jtag_ntrst_assert_width
; /* width of assertion */
111 * Contains a single callback along with a pointer that will be passed
112 * when an event occurs.
114 struct jtag_event_callback
{
115 /** a event callback */
116 jtag_event_handler_t callback
;
117 /** the private data to pass to the callback */
119 /** the next callback */
120 struct jtag_event_callback
*next
;
123 /* callbacks to inform high-level handlers about JTAG state changes */
124 static struct jtag_event_callback
*jtag_event_callbacks
;
127 static int speed_khz
;
128 /* speed to fallback to when RCLK is requested but not supported */
129 static int rclk_fallback_speed_khz
;
130 static enum {CLOCK_MODE_UNSELECTED
, CLOCK_MODE_KHZ
, CLOCK_MODE_RCLK
} clock_mode
;
131 static int jtag_speed
;
133 /* FIXME: change name to this variable, it is not anymore JTAG only */
134 static struct adapter_driver
*jtag
;
136 extern struct adapter_driver
*adapter_driver
;
138 void jtag_set_flush_queue_sleep(int ms
)
140 jtag_flush_queue_sleep
= ms
;
143 void jtag_set_error(int error
)
145 if ((error
== ERROR_OK
) || (jtag_error
!= ERROR_OK
))
150 int jtag_error_clear(void)
152 int temp
= jtag_error
;
153 jtag_error
= ERROR_OK
;
159 static bool jtag_poll
= 1;
161 bool is_jtag_poll_safe(void)
163 /* Polling can be disabled explicitly with set_enabled(false).
164 * It is also implicitly disabled while TRST is active and
165 * while SRST is gating the JTAG clock.
167 if (!transport_is_jtag())
170 if (!jtag_poll
|| jtag_trst
!= 0)
172 return jtag_srst
== 0 || (jtag_reset_config
& RESET_SRST_NO_GATING
);
175 bool jtag_poll_get_enabled(void)
180 void jtag_poll_set_enabled(bool value
)
187 struct jtag_tap
*jtag_all_taps(void)
189 return __jtag_all_taps
;
192 unsigned jtag_tap_count(void)
194 struct jtag_tap
*t
= jtag_all_taps();
203 unsigned jtag_tap_count_enabled(void)
205 struct jtag_tap
*t
= jtag_all_taps();
215 /** Append a new TAP to the chain of all taps. */
216 static void jtag_tap_add(struct jtag_tap
*t
)
218 unsigned jtag_num_taps
= 0;
220 struct jtag_tap
**tap
= &__jtag_all_taps
;
223 tap
= &(*tap
)->next_tap
;
226 t
->abs_chain_position
= jtag_num_taps
;
229 /* returns a pointer to the n-th device in the scan chain */
230 struct jtag_tap
*jtag_tap_by_position(unsigned n
)
232 struct jtag_tap
*t
= jtag_all_taps();
240 struct jtag_tap
*jtag_tap_by_string(const char *s
)
242 /* try by name first */
243 struct jtag_tap
*t
= jtag_all_taps();
246 if (strcmp(t
->dotted_name
, s
) == 0)
251 /* no tap found by name, so try to parse the name as a number */
253 if (parse_uint(s
, &n
) != ERROR_OK
)
256 /* FIXME remove this numeric fallback code late June 2010, along
257 * with all info in the User's Guide that TAPs have numeric IDs.
258 * Also update "scan_chain" output to not display the numbers.
260 t
= jtag_tap_by_position(n
);
262 LOG_WARNING("Specify TAP '%s' by name, not number %u",
268 struct jtag_tap
*jtag_tap_next_enabled(struct jtag_tap
*p
)
270 p
= p
? p
->next_tap
: jtag_all_taps();
279 const char *jtag_tap_name(const struct jtag_tap
*tap
)
281 return (!tap
) ? "(unknown)" : tap
->dotted_name
;
285 int jtag_register_event_callback(jtag_event_handler_t callback
, void *priv
)
287 struct jtag_event_callback
**callbacks_p
= &jtag_event_callbacks
;
290 return ERROR_COMMAND_SYNTAX_ERROR
;
293 while ((*callbacks_p
)->next
)
294 callbacks_p
= &((*callbacks_p
)->next
);
295 callbacks_p
= &((*callbacks_p
)->next
);
298 (*callbacks_p
) = malloc(sizeof(struct jtag_event_callback
));
299 (*callbacks_p
)->callback
= callback
;
300 (*callbacks_p
)->priv
= priv
;
301 (*callbacks_p
)->next
= NULL
;
306 int jtag_unregister_event_callback(jtag_event_handler_t callback
, void *priv
)
308 struct jtag_event_callback
**p
= &jtag_event_callbacks
, *temp
;
311 return ERROR_COMMAND_SYNTAX_ERROR
;
314 if (((*p
)->priv
!= priv
) || ((*p
)->callback
!= callback
)) {
327 int jtag_call_event_callbacks(enum jtag_event event
)
329 struct jtag_event_callback
*callback
= jtag_event_callbacks
;
331 LOG_DEBUG("jtag event: %s", jtag_event_strings
[event
]);
334 struct jtag_event_callback
*next
;
336 /* callback may remove itself */
337 next
= callback
->next
;
338 callback
->callback(event
, callback
->priv
);
345 static void jtag_checks(void)
347 assert(jtag_trst
== 0);
350 static void jtag_prelude(tap_state_t state
)
354 assert(state
!= TAP_INVALID
);
356 cmd_queue_cur_state
= state
;
359 void jtag_add_ir_scan_noverify(struct jtag_tap
*active
, const struct scan_field
*in_fields
,
364 int retval
= interface_jtag_add_ir_scan(active
, in_fields
, state
);
365 jtag_set_error(retval
);
368 static void jtag_add_ir_scan_noverify_callback(struct jtag_tap
*active
,
370 const struct scan_field
*in_fields
,
373 jtag_add_ir_scan_noverify(active
, in_fields
, state
);
376 /* If fields->in_value is filled out, then the captured IR value will be checked */
377 void jtag_add_ir_scan(struct jtag_tap
*active
, struct scan_field
*in_fields
, tap_state_t state
)
379 assert(state
!= TAP_RESET
);
381 if (jtag_verify
&& jtag_verify_capture_ir
) {
382 /* 8 x 32 bit id's is enough for all invocations */
384 /* if we are to run a verification of the ir scan, we need to get the input back.
385 * We may have to allocate space if the caller didn't ask for the input back.
387 in_fields
->check_value
= active
->expected
;
388 in_fields
->check_mask
= active
->expected_mask
;
389 jtag_add_scan_check(active
, jtag_add_ir_scan_noverify_callback
, 1, in_fields
,
392 jtag_add_ir_scan_noverify(active
, in_fields
, state
);
395 void jtag_add_plain_ir_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
,
399 assert(state
!= TAP_RESET
);
403 int retval
= interface_jtag_add_plain_ir_scan(
404 num_bits
, out_bits
, in_bits
, state
);
405 jtag_set_error(retval
);
408 static int jtag_check_value_inner(uint8_t *captured
, uint8_t *in_check_value
,
409 uint8_t *in_check_mask
, int num_bits
);
411 static int jtag_check_value_mask_callback(jtag_callback_data_t data0
,
412 jtag_callback_data_t data1
,
413 jtag_callback_data_t data2
,
414 jtag_callback_data_t data3
)
416 return jtag_check_value_inner((uint8_t *)data0
,
422 static void jtag_add_scan_check(struct jtag_tap
*active
, void (*jtag_add_scan
)(
423 struct jtag_tap
*active
,
425 const struct scan_field
*in_fields
,
427 int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
)
429 jtag_add_scan(active
, in_num_fields
, in_fields
, state
);
431 for (int i
= 0; i
< in_num_fields
; i
++) {
432 if ((in_fields
[i
].check_value
) && (in_fields
[i
].in_value
)) {
433 jtag_add_callback4(jtag_check_value_mask_callback
,
434 (jtag_callback_data_t
)in_fields
[i
].in_value
,
435 (jtag_callback_data_t
)in_fields
[i
].check_value
,
436 (jtag_callback_data_t
)in_fields
[i
].check_mask
,
437 (jtag_callback_data_t
)in_fields
[i
].num_bits
);
442 void jtag_add_dr_scan_check(struct jtag_tap
*active
,
444 struct scan_field
*in_fields
,
448 jtag_add_scan_check(active
, jtag_add_dr_scan
, in_num_fields
, in_fields
, state
);
450 jtag_add_dr_scan(active
, in_num_fields
, in_fields
, state
);
454 void jtag_add_dr_scan(struct jtag_tap
*active
,
456 const struct scan_field
*in_fields
,
459 assert(state
!= TAP_RESET
);
464 retval
= interface_jtag_add_dr_scan(active
, in_num_fields
, in_fields
, state
);
465 jtag_set_error(retval
);
468 void jtag_add_plain_dr_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
,
472 assert(state
!= TAP_RESET
);
477 retval
= interface_jtag_add_plain_dr_scan(num_bits
, out_bits
, in_bits
, state
);
478 jtag_set_error(retval
);
481 void jtag_add_tlr(void)
483 jtag_prelude(TAP_RESET
);
484 jtag_set_error(interface_jtag_add_tlr());
486 /* NOTE: order here matches TRST path in jtag_add_reset() */
487 jtag_call_event_callbacks(JTAG_TRST_ASSERTED
);
488 jtag_notify_event(JTAG_TRST_ASSERTED
);
492 * If supported by the underlying adapter, this clocks a raw bit sequence
493 * onto TMS for switching between JTAG and SWD modes.
495 * DO NOT use this to bypass the integrity checks and logging provided
496 * by the jtag_add_pathmove() and jtag_add_statemove() calls.
498 * @param nbits How many bits to clock out.
499 * @param seq The bit sequence. The LSB is bit 0 of seq[0].
500 * @param state The JTAG tap state to record on completion. Use
501 * TAP_INVALID to represent being in in SWD mode.
503 * @todo Update naming conventions to stop assuming everything is JTAG.
505 int jtag_add_tms_seq(unsigned nbits
, const uint8_t *seq
, enum tap_state state
)
509 if (!(jtag
->jtag_ops
->supported
& DEBUG_CAP_TMS_SEQ
))
510 return ERROR_JTAG_NOT_IMPLEMENTED
;
513 cmd_queue_cur_state
= state
;
515 retval
= interface_add_tms_seq(nbits
, seq
, state
);
516 jtag_set_error(retval
);
520 void jtag_add_pathmove(int num_states
, const tap_state_t
*path
)
522 tap_state_t cur_state
= cmd_queue_cur_state
;
524 /* the last state has to be a stable state */
525 if (!tap_is_state_stable(path
[num_states
- 1])) {
526 LOG_ERROR("BUG: TAP path doesn't finish in a stable state");
527 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE
);
531 for (int i
= 0; i
< num_states
; i
++) {
532 if (path
[i
] == TAP_RESET
) {
533 LOG_ERROR("BUG: TAP_RESET is not a valid state for pathmove sequences");
534 jtag_set_error(ERROR_JTAG_STATE_INVALID
);
538 if (tap_state_transition(cur_state
, true) != path
[i
] &&
539 tap_state_transition(cur_state
, false) != path
[i
]) {
540 LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
541 tap_state_name(cur_state
), tap_state_name(path
[i
]));
542 jtag_set_error(ERROR_JTAG_TRANSITION_INVALID
);
550 jtag_set_error(interface_jtag_add_pathmove(num_states
, path
));
551 cmd_queue_cur_state
= path
[num_states
- 1];
554 int jtag_add_statemove(tap_state_t goal_state
)
556 tap_state_t cur_state
= cmd_queue_cur_state
;
558 if (goal_state
!= cur_state
) {
559 LOG_DEBUG("cur_state=%s goal_state=%s",
560 tap_state_name(cur_state
),
561 tap_state_name(goal_state
));
564 /* If goal is RESET, be paranoid and force that that transition
565 * (e.g. five TCK cycles, TMS high). Else trust "cur_state".
567 if (goal_state
== TAP_RESET
)
569 else if (goal_state
== cur_state
)
572 else if (tap_is_state_stable(cur_state
) && tap_is_state_stable(goal_state
)) {
573 unsigned tms_bits
= tap_get_tms_path(cur_state
, goal_state
);
574 unsigned tms_count
= tap_get_tms_path_len(cur_state
, goal_state
);
575 tap_state_t moves
[8];
576 assert(tms_count
< ARRAY_SIZE(moves
));
578 for (unsigned i
= 0; i
< tms_count
; i
++, tms_bits
>>= 1) {
579 bool bit
= tms_bits
& 1;
581 cur_state
= tap_state_transition(cur_state
, bit
);
582 moves
[i
] = cur_state
;
585 jtag_add_pathmove(tms_count
, moves
);
586 } else if (tap_state_transition(cur_state
, true) == goal_state
587 || tap_state_transition(cur_state
, false) == goal_state
)
588 jtag_add_pathmove(1, &goal_state
);
595 void jtag_add_runtest(int num_cycles
, tap_state_t state
)
598 jtag_set_error(interface_jtag_add_runtest(num_cycles
, state
));
602 void jtag_add_clocks(int num_cycles
)
604 if (!tap_is_state_stable(cmd_queue_cur_state
)) {
605 LOG_ERROR("jtag_add_clocks() called with TAP in unstable state \"%s\"",
606 tap_state_name(cmd_queue_cur_state
));
607 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE
);
611 if (num_cycles
> 0) {
613 jtag_set_error(interface_jtag_add_clocks(num_cycles
));
617 static int adapter_system_reset(int req_srst
)
622 if (!(jtag_reset_config
& RESET_HAS_SRST
)) {
623 LOG_ERROR("BUG: can't assert SRST");
629 /* Maybe change SRST signal state */
630 if (jtag_srst
!= req_srst
) {
631 retval
= jtag
->reset(0, req_srst
);
632 if (retval
!= ERROR_OK
) {
633 LOG_ERROR("SRST error");
636 jtag_srst
= req_srst
;
639 LOG_DEBUG("SRST line asserted");
640 if (adapter_nsrst_assert_width
)
641 jtag_sleep(adapter_nsrst_assert_width
* 1000);
643 LOG_DEBUG("SRST line released");
644 if (adapter_nsrst_delay
)
645 jtag_sleep(adapter_nsrst_delay
* 1000);
652 static void legacy_jtag_add_reset(int req_tlr_or_trst
, int req_srst
)
654 int trst_with_tlr
= 0;
658 /* Without SRST, we must use target-specific JTAG operations
659 * on each target; callers should not be requesting SRST when
660 * that signal doesn't exist.
662 * RESET_SRST_PULLS_TRST is a board or chip level quirk, which
663 * can kick in even if the JTAG adapter can't drive TRST.
666 if (!(jtag_reset_config
& RESET_HAS_SRST
)) {
667 LOG_ERROR("BUG: can't assert SRST");
668 jtag_set_error(ERROR_FAIL
);
671 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) != 0
672 && !req_tlr_or_trst
) {
673 LOG_ERROR("BUG: can't assert only SRST");
674 jtag_set_error(ERROR_FAIL
);
680 /* JTAG reset (entry to TAP_RESET state) can always be achieved
681 * using TCK and TMS; that may go through a TAP_{IR,DR}UPDATE
682 * state first. TRST accelerates it, and bypasses those states.
684 * RESET_TRST_PULLS_SRST is a board or chip level quirk, which
685 * can kick in even if the JTAG adapter can't drive SRST.
687 if (req_tlr_or_trst
) {
688 if (!(jtag_reset_config
& RESET_HAS_TRST
))
690 else if ((jtag_reset_config
& RESET_TRST_PULLS_SRST
) != 0
697 /* Maybe change TRST and/or SRST signal state */
698 if (jtag_srst
!= new_srst
|| jtag_trst
!= new_trst
) {
701 retval
= interface_jtag_add_reset(new_trst
, new_srst
);
702 if (retval
!= ERROR_OK
)
703 jtag_set_error(retval
);
705 retval
= jtag_execute_queue();
707 if (retval
!= ERROR_OK
) {
708 LOG_ERROR("TRST/SRST error");
713 /* SRST resets everything hooked up to that signal */
714 if (jtag_srst
!= new_srst
) {
715 jtag_srst
= new_srst
;
717 LOG_DEBUG("SRST line asserted");
718 if (adapter_nsrst_assert_width
)
719 jtag_add_sleep(adapter_nsrst_assert_width
* 1000);
721 LOG_DEBUG("SRST line released");
722 if (adapter_nsrst_delay
)
723 jtag_add_sleep(adapter_nsrst_delay
* 1000);
727 /* Maybe enter the JTAG TAP_RESET state ...
728 * - using only TMS, TCK, and the JTAG state machine
729 * - or else more directly, using TRST
731 * TAP_RESET should be invisible to non-debug parts of the system.
734 LOG_DEBUG("JTAG reset with TLR instead of TRST");
737 } else if (jtag_trst
!= new_trst
) {
738 jtag_trst
= new_trst
;
740 LOG_DEBUG("TRST line asserted");
741 tap_set_state(TAP_RESET
);
742 if (jtag_ntrst_assert_width
)
743 jtag_add_sleep(jtag_ntrst_assert_width
* 1000);
745 LOG_DEBUG("TRST line released");
746 if (jtag_ntrst_delay
)
747 jtag_add_sleep(jtag_ntrst_delay
* 1000);
749 /* We just asserted nTRST, so we're now in TAP_RESET.
750 * Inform possible listeners about this, now that
751 * JTAG instructions and data can be shifted. This
752 * sequence must match jtag_add_tlr().
754 jtag_call_event_callbacks(JTAG_TRST_ASSERTED
);
755 jtag_notify_event(JTAG_TRST_ASSERTED
);
760 /* FIXME: name is misleading; we do not plan to "add" reset into jtag queue */
761 void jtag_add_reset(int req_tlr_or_trst
, int req_srst
)
764 int trst_with_tlr
= 0;
769 legacy_jtag_add_reset(req_tlr_or_trst
, req_srst
);
773 /* Without SRST, we must use target-specific JTAG operations
774 * on each target; callers should not be requesting SRST when
775 * that signal doesn't exist.
777 * RESET_SRST_PULLS_TRST is a board or chip level quirk, which
778 * can kick in even if the JTAG adapter can't drive TRST.
781 if (!(jtag_reset_config
& RESET_HAS_SRST
)) {
782 LOG_ERROR("BUG: can't assert SRST");
783 jtag_set_error(ERROR_FAIL
);
786 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) != 0
787 && !req_tlr_or_trst
) {
788 LOG_ERROR("BUG: can't assert only SRST");
789 jtag_set_error(ERROR_FAIL
);
795 /* JTAG reset (entry to TAP_RESET state) can always be achieved
796 * using TCK and TMS; that may go through a TAP_{IR,DR}UPDATE
797 * state first. TRST accelerates it, and bypasses those states.
799 * RESET_TRST_PULLS_SRST is a board or chip level quirk, which
800 * can kick in even if the JTAG adapter can't drive SRST.
802 if (req_tlr_or_trst
) {
803 if (!(jtag_reset_config
& RESET_HAS_TRST
))
805 else if ((jtag_reset_config
& RESET_TRST_PULLS_SRST
) != 0
812 /* Maybe change TRST and/or SRST signal state */
813 if (jtag_srst
!= new_srst
|| jtag_trst
!= new_trst
) {
814 /* guarantee jtag queue empty before changing reset status */
815 jtag_execute_queue();
817 retval
= jtag
->reset(new_trst
, new_srst
);
818 if (retval
!= ERROR_OK
) {
819 jtag_set_error(retval
);
820 LOG_ERROR("TRST/SRST error");
825 /* SRST resets everything hooked up to that signal */
826 if (jtag_srst
!= new_srst
) {
827 jtag_srst
= new_srst
;
829 LOG_DEBUG("SRST line asserted");
830 if (adapter_nsrst_assert_width
)
831 jtag_add_sleep(adapter_nsrst_assert_width
* 1000);
833 LOG_DEBUG("SRST line released");
834 if (adapter_nsrst_delay
)
835 jtag_add_sleep(adapter_nsrst_delay
* 1000);
839 /* Maybe enter the JTAG TAP_RESET state ...
840 * - using only TMS, TCK, and the JTAG state machine
841 * - or else more directly, using TRST
843 * TAP_RESET should be invisible to non-debug parts of the system.
846 LOG_DEBUG("JTAG reset with TLR instead of TRST");
848 jtag_execute_queue();
850 } else if (jtag_trst
!= new_trst
) {
851 jtag_trst
= new_trst
;
853 LOG_DEBUG("TRST line asserted");
854 tap_set_state(TAP_RESET
);
855 if (jtag_ntrst_assert_width
)
856 jtag_add_sleep(jtag_ntrst_assert_width
* 1000);
858 LOG_DEBUG("TRST line released");
859 if (jtag_ntrst_delay
)
860 jtag_add_sleep(jtag_ntrst_delay
* 1000);
862 /* We just asserted nTRST, so we're now in TAP_RESET.
863 * Inform possible listeners about this, now that
864 * JTAG instructions and data can be shifted. This
865 * sequence must match jtag_add_tlr().
867 jtag_call_event_callbacks(JTAG_TRST_ASSERTED
);
868 jtag_notify_event(JTAG_TRST_ASSERTED
);
873 void jtag_add_sleep(uint32_t us
)
875 /** @todo Here, keep_alive() appears to be a layering violation!!! */
877 jtag_set_error(interface_jtag_add_sleep(us
));
880 static int jtag_check_value_inner(uint8_t *captured
, uint8_t *in_check_value
,
881 uint8_t *in_check_mask
, int num_bits
)
883 int retval
= ERROR_OK
;
887 compare_failed
= buf_cmp_mask(captured
, in_check_value
, in_check_mask
, num_bits
);
889 compare_failed
= buf_cmp(captured
, in_check_value
, num_bits
);
891 if (compare_failed
) {
892 char *captured_str
, *in_check_value_str
;
893 int bits
= (num_bits
> DEBUG_JTAG_IOZ
) ? DEBUG_JTAG_IOZ
: num_bits
;
895 /* NOTE: we've lost diagnostic context here -- 'which tap' */
897 captured_str
= buf_to_hex_str(captured
, bits
);
898 in_check_value_str
= buf_to_hex_str(in_check_value
, bits
);
900 LOG_WARNING("Bad value '%s' captured during DR or IR scan:",
902 LOG_WARNING(" check_value: 0x%s", in_check_value_str
);
905 free(in_check_value_str
);
908 char *in_check_mask_str
;
910 in_check_mask_str
= buf_to_hex_str(in_check_mask
, bits
);
911 LOG_WARNING(" check_mask: 0x%s", in_check_mask_str
);
912 free(in_check_mask_str
);
915 retval
= ERROR_JTAG_QUEUE_FAILED
;
920 void jtag_check_value_mask(struct scan_field
*field
, uint8_t *value
, uint8_t *mask
)
922 assert(field
->in_value
);
925 /* no checking to do */
929 jtag_execute_queue_noclear();
931 int retval
= jtag_check_value_inner(field
->in_value
, value
, mask
, field
->num_bits
);
932 jtag_set_error(retval
);
935 int default_interface_jtag_execute_queue(void)
938 LOG_ERROR("No JTAG interface configured yet. "
939 "Issue 'init' command in startup scripts "
940 "before communicating with targets.");
944 if (!transport_is_jtag()) {
946 * FIXME: This should not happen!
947 * There could be old code that queues jtag commands with non jtag interfaces so, for
948 * the moment simply highlight it by log an error and return on empty execute_queue.
949 * We should fix it quitting with assert(0) because it is an internal error.
950 * The fix can be applied immediately after next release (v0.11.0 ?)
952 LOG_ERROR("JTAG API jtag_execute_queue() called on non JTAG interface");
953 if (!jtag
->jtag_ops
|| !jtag
->jtag_ops
->execute_queue
)
957 int result
= jtag
->jtag_ops
->execute_queue();
959 struct jtag_command
*cmd
= jtag_command_queue
;
960 while (debug_level
>= LOG_LVL_DEBUG_IO
&& cmd
) {
963 LOG_DEBUG_IO("JTAG %s SCAN to %s",
964 cmd
->cmd
.scan
->ir_scan
? "IR" : "DR",
965 tap_state_name(cmd
->cmd
.scan
->end_state
));
966 for (int i
= 0; i
< cmd
->cmd
.scan
->num_fields
; i
++) {
967 struct scan_field
*field
= cmd
->cmd
.scan
->fields
+ i
;
968 if (field
->out_value
) {
969 char *str
= buf_to_hex_str(field
->out_value
, field
->num_bits
);
970 LOG_DEBUG_IO(" %db out: %s", field
->num_bits
, str
);
973 if (field
->in_value
) {
974 char *str
= buf_to_hex_str(field
->in_value
, field
->num_bits
);
975 LOG_DEBUG_IO(" %db in: %s", field
->num_bits
, str
);
981 LOG_DEBUG_IO("JTAG TLR RESET to %s",
982 tap_state_name(cmd
->cmd
.statemove
->end_state
));
985 LOG_DEBUG_IO("JTAG RUNTEST %d cycles to %s",
986 cmd
->cmd
.runtest
->num_cycles
,
987 tap_state_name(cmd
->cmd
.runtest
->end_state
));
991 const char *reset_str
[3] = {
992 "leave", "deassert", "assert"
994 LOG_DEBUG_IO("JTAG RESET %s TRST, %s SRST",
995 reset_str
[cmd
->cmd
.reset
->trst
+ 1],
996 reset_str
[cmd
->cmd
.reset
->srst
+ 1]);
1000 LOG_DEBUG_IO("JTAG PATHMOVE (TODO)");
1003 LOG_DEBUG_IO("JTAG SLEEP (TODO)");
1005 case JTAG_STABLECLOCKS
:
1006 LOG_DEBUG_IO("JTAG STABLECLOCKS (TODO)");
1009 LOG_DEBUG_IO("JTAG TMS (TODO)");
1012 LOG_ERROR("Unknown JTAG command: %d", cmd
->type
);
1021 void jtag_execute_queue_noclear(void)
1023 jtag_flush_queue_count
++;
1024 jtag_set_error(interface_jtag_execute_queue());
1026 if (jtag_flush_queue_sleep
> 0) {
1027 /* For debug purposes it can be useful to test performance
1028 * or behavior when delaying after flushing the queue,
1029 * e.g. to simulate long roundtrip times.
1031 usleep(jtag_flush_queue_sleep
* 1000);
1035 int jtag_get_flush_queue_count(void)
1037 return jtag_flush_queue_count
;
1040 int jtag_execute_queue(void)
1042 jtag_execute_queue_noclear();
1043 return jtag_error_clear();
1046 static int jtag_reset_callback(enum jtag_event event
, void *priv
)
1048 struct jtag_tap
*tap
= priv
;
1050 if (event
== JTAG_TRST_ASSERTED
) {
1051 tap
->enabled
= !tap
->disabled_after_reset
;
1053 /* current instruction is either BYPASS or IDCODE */
1054 buf_set_ones(tap
->cur_instr
, tap
->ir_length
);
1061 /* sleep at least us microseconds. When we sleep more than 1000ms we
1062 * do an alive sleep, i.e. keep GDB alive. Note that we could starve
1063 * GDB if we slept for <1000ms many times.
1065 void jtag_sleep(uint32_t us
)
1070 alive_sleep((us
+999)/1000);
1073 #define JTAG_MAX_AUTO_TAPS 20
1075 #define EXTRACT_MFG(X) (((X) & 0xffe) >> 1)
1076 #define EXTRACT_PART(X) (((X) & 0xffff000) >> 12)
1077 #define EXTRACT_VER(X) (((X) & 0xf0000000) >> 28)
1079 /* A reserved manufacturer ID is used in END_OF_CHAIN_FLAG, so we
1080 * know that no valid TAP will have it as an IDCODE value.
1082 #define END_OF_CHAIN_FLAG 0xffffffff
1084 /* a larger IR length than we ever expect to autoprobe */
1085 #define JTAG_IRLEN_MAX 60
1087 static int jtag_examine_chain_execute(uint8_t *idcode_buffer
, unsigned num_idcode
)
1089 struct scan_field field
= {
1090 .num_bits
= num_idcode
* 32,
1091 .out_value
= idcode_buffer
,
1092 .in_value
= idcode_buffer
,
1095 /* initialize to the end of chain ID value */
1096 for (unsigned i
= 0; i
< num_idcode
; i
++)
1097 buf_set_u32(idcode_buffer
, i
* 32, 32, END_OF_CHAIN_FLAG
);
1099 jtag_add_plain_dr_scan(field
.num_bits
, field
.out_value
, field
.in_value
, TAP_DRPAUSE
);
1101 return jtag_execute_queue();
1104 static bool jtag_examine_chain_check(uint8_t *idcodes
, unsigned count
)
1106 uint8_t zero_check
= 0x0;
1107 uint8_t one_check
= 0xff;
1109 for (unsigned i
= 0; i
< count
* 4; i
++) {
1110 zero_check
|= idcodes
[i
];
1111 one_check
&= idcodes
[i
];
1114 /* if there wasn't a single non-zero bit or if all bits were one,
1115 * the scan is not valid. We wrote a mix of both values; either
1117 * - There's a hardware issue (almost certainly):
1118 * + all-zeroes can mean a target stuck in JTAG reset
1119 * + all-ones tends to mean no target
1120 * - The scan chain is WAY longer than we can handle, *AND* either
1121 * + there are several hundreds of TAPs in bypass, or
1122 * + at least a few dozen TAPs all have an all-ones IDCODE
1124 if (zero_check
== 0x00 || one_check
== 0xff) {
1125 LOG_ERROR("JTAG scan chain interrogation failed: all %s",
1126 (zero_check
== 0x00) ? "zeroes" : "ones");
1127 LOG_ERROR("Check JTAG interface, timings, target power, etc.");
1133 static void jtag_examine_chain_display(enum log_levels level
, const char *msg
,
1134 const char *name
, uint32_t idcode
)
1136 log_printf_lf(level
, __FILE__
, __LINE__
, __func__
,
1137 "JTAG tap: %s %16.16s: 0x%08x "
1138 "(mfg: 0x%3.3x (%s), part: 0x%4.4x, ver: 0x%1.1x)",
1140 (unsigned int)idcode
,
1141 (unsigned int)EXTRACT_MFG(idcode
),
1142 jep106_manufacturer(EXTRACT_MFG(idcode
)),
1143 (unsigned int)EXTRACT_PART(idcode
),
1144 (unsigned int)EXTRACT_VER(idcode
));
1147 static bool jtag_idcode_is_final(uint32_t idcode
)
1150 * Some devices, such as AVR8, will output all 1's instead
1151 * of TDI input value at end of chain. Allow those values
1152 * instead of failing.
1154 return idcode
== END_OF_CHAIN_FLAG
;
1158 * This helper checks that remaining bits in the examined chain data are
1159 * all as expected, but a single JTAG device requires only 64 bits to be
1160 * read back correctly. This can help identify and diagnose problems
1161 * with the JTAG chain earlier, gives more helpful/explicit error messages.
1162 * Returns TRUE iff garbage was found.
1164 static bool jtag_examine_chain_end(uint8_t *idcodes
, unsigned count
, unsigned max
)
1166 bool triggered
= false;
1167 for (; count
< max
- 31; count
+= 32) {
1168 uint32_t idcode
= buf_get_u32(idcodes
, count
, 32);
1170 /* do not trigger the warning if the data looks good */
1171 if (jtag_idcode_is_final(idcode
))
1173 LOG_WARNING("Unexpected idcode after end of chain: %d 0x%08x",
1174 count
, (unsigned int)idcode
);
1180 static bool jtag_examine_chain_match_tap(const struct jtag_tap
*tap
)
1183 if (tap
->expected_ids_cnt
== 0 || !tap
->hasidcode
)
1186 /* optionally ignore the JTAG version field - bits 28-31 of IDCODE */
1187 uint32_t mask
= tap
->ignore_version
? ~(0xfU
<< 28) : ~0U;
1188 uint32_t idcode
= tap
->idcode
& mask
;
1190 /* Loop over the expected identification codes and test for a match */
1191 for (unsigned ii
= 0; ii
< tap
->expected_ids_cnt
; ii
++) {
1192 uint32_t expected
= tap
->expected_ids
[ii
] & mask
;
1194 if (idcode
== expected
)
1197 /* treat "-expected-id 0" as a "don't-warn" wildcard */
1198 if (tap
->expected_ids
[ii
] == 0)
1202 /* If none of the expected ids matched, warn */
1203 jtag_examine_chain_display(LOG_LVL_WARNING
, "UNEXPECTED",
1204 tap
->dotted_name
, tap
->idcode
);
1205 for (unsigned ii
= 0; ii
< tap
->expected_ids_cnt
; ii
++) {
1208 snprintf(msg
, sizeof(msg
), "expected %u of %u", ii
+ 1, tap
->expected_ids_cnt
);
1209 jtag_examine_chain_display(LOG_LVL_ERROR
, msg
,
1210 tap
->dotted_name
, tap
->expected_ids
[ii
]);
1215 /* Try to examine chain layout according to IEEE 1149.1 §12
1216 * This is called a "blind interrogation" of the scan chain.
1218 static int jtag_examine_chain(void)
1221 unsigned max_taps
= jtag_tap_count();
1223 /* Autoprobe up to this many. */
1224 if (max_taps
< JTAG_MAX_AUTO_TAPS
)
1225 max_taps
= JTAG_MAX_AUTO_TAPS
;
1227 /* Add room for end-of-chain marker. */
1230 uint8_t *idcode_buffer
= calloc(4, max_taps
);
1232 return ERROR_JTAG_INIT_FAILED
;
1234 /* DR scan to collect BYPASS or IDCODE register contents.
1235 * Then make sure the scan data has both ones and zeroes.
1237 LOG_DEBUG("DR scan interrogation for IDCODE/BYPASS");
1238 retval
= jtag_examine_chain_execute(idcode_buffer
, max_taps
);
1239 if (retval
!= ERROR_OK
)
1241 if (!jtag_examine_chain_check(idcode_buffer
, max_taps
)) {
1242 retval
= ERROR_JTAG_INIT_FAILED
;
1246 /* Point at the 1st predefined tap, if any */
1247 struct jtag_tap
*tap
= jtag_tap_next_enabled(NULL
);
1249 unsigned bit_count
= 0;
1250 unsigned autocount
= 0;
1251 for (unsigned i
= 0; i
< max_taps
; i
++) {
1252 assert(bit_count
< max_taps
* 32);
1253 uint32_t idcode
= buf_get_u32(idcode_buffer
, bit_count
, 32);
1255 /* No predefined TAP? Auto-probe. */
1257 /* Is there another TAP? */
1258 if (jtag_idcode_is_final(idcode
))
1261 /* Default everything in this TAP except IR length.
1263 * REVISIT create a jtag_alloc(chip, tap) routine, and
1264 * share it with jim_newtap_cmd().
1266 tap
= calloc(1, sizeof(*tap
));
1268 retval
= ERROR_FAIL
;
1272 tap
->chip
= alloc_printf("auto%u", autocount
++);
1273 tap
->tapname
= strdup("tap");
1274 tap
->dotted_name
= alloc_printf("%s.%s", tap
->chip
, tap
->tapname
);
1276 tap
->ir_length
= 0; /* ... signifying irlen autoprobe */
1277 tap
->ir_capture_mask
= 0x03;
1278 tap
->ir_capture_value
= 0x01;
1280 tap
->enabled
= true;
1285 if ((idcode
& 1) == 0) {
1286 /* Zero for LSB indicates a device in bypass */
1287 LOG_INFO("TAP %s does not have valid IDCODE (idcode=0x%" PRIx32
")",
1288 tap
->dotted_name
, idcode
);
1289 tap
->hasidcode
= false;
1294 /* Friendly devices support IDCODE */
1295 tap
->hasidcode
= true;
1296 tap
->idcode
= idcode
;
1297 jtag_examine_chain_display(LOG_LVL_INFO
, "tap/device found", tap
->dotted_name
, idcode
);
1302 /* ensure the TAP ID matches what was expected */
1303 if (!jtag_examine_chain_match_tap(tap
))
1304 retval
= ERROR_JTAG_INIT_SOFT_FAIL
;
1306 tap
= jtag_tap_next_enabled(tap
);
1309 /* After those IDCODE or BYPASS register values should be
1310 * only the data we fed into the scan chain.
1312 if (jtag_examine_chain_end(idcode_buffer
, bit_count
, max_taps
* 32)) {
1313 LOG_ERROR("double-check your JTAG setup (interface, speed, ...)");
1314 retval
= ERROR_JTAG_INIT_FAILED
;
1318 /* Return success or, for backwards compatibility if only
1319 * some IDCODE values mismatched, a soft/continuable fault.
1322 free(idcode_buffer
);
1327 * Validate the date loaded by entry to the Capture-IR state, to help
1328 * find errors related to scan chain configuration (wrong IR lengths)
1331 * Entry state can be anything. On non-error exit, all TAPs are in
1332 * bypass mode. On error exits, the scan chain is reset.
1334 static int jtag_validate_ircapture(void)
1336 struct jtag_tap
*tap
;
1337 uint8_t *ir_test
= NULL
;
1338 struct scan_field field
;
1343 /* when autoprobing, accommodate huge IR lengths */
1344 int total_ir_length
= 0;
1345 for (tap
= jtag_tap_next_enabled(NULL
); tap
; tap
= jtag_tap_next_enabled(tap
)) {
1346 if (tap
->ir_length
== 0)
1347 total_ir_length
+= JTAG_IRLEN_MAX
;
1349 total_ir_length
+= tap
->ir_length
;
1352 /* increase length to add 2 bit sentinel after scan */
1353 total_ir_length
+= 2;
1355 ir_test
= malloc(DIV_ROUND_UP(total_ir_length
, 8));
1359 /* after this scan, all TAPs will capture BYPASS instructions */
1360 buf_set_ones(ir_test
, total_ir_length
);
1362 field
.num_bits
= total_ir_length
;
1363 field
.out_value
= ir_test
;
1364 field
.in_value
= ir_test
;
1366 jtag_add_plain_ir_scan(field
.num_bits
, field
.out_value
, field
.in_value
, TAP_IDLE
);
1368 LOG_DEBUG("IR capture validation scan");
1369 retval
= jtag_execute_queue();
1370 if (retval
!= ERROR_OK
)
1377 tap
= jtag_tap_next_enabled(tap
);
1381 /* If we're autoprobing, guess IR lengths. They must be at
1382 * least two bits. Guessing will fail if (a) any TAP does
1383 * not conform to the JTAG spec; or (b) when the upper bits
1384 * captured from some conforming TAP are nonzero. Or if
1385 * (c) an IR length is longer than JTAG_IRLEN_MAX bits,
1386 * an implementation limit, which could someday be raised.
1388 * REVISIT optimization: if there's a *single* TAP we can
1389 * lift restrictions (a) and (b) by scanning a recognizable
1390 * pattern before the all-ones BYPASS. Check for where the
1391 * pattern starts in the result, instead of an 0...01 value.
1393 * REVISIT alternative approach: escape to some tcl code
1394 * which could provide more knowledge, based on IDCODE; and
1395 * only guess when that has no success.
1397 if (tap
->ir_length
== 0) {
1399 while ((val
= buf_get_u64(ir_test
, chain_pos
, tap
->ir_length
+ 1)) == 1
1400 && tap
->ir_length
< JTAG_IRLEN_MAX
) {
1403 LOG_WARNING("AUTO %s - use \"jtag newtap %s %s -irlen %d "
1404 "-expected-id 0x%08" PRIx32
"\"",
1405 tap
->dotted_name
, tap
->chip
, tap
->tapname
, tap
->ir_length
, tap
->idcode
);
1408 /* Validate the two LSBs, which must be 01 per JTAG spec.
1410 * Or ... more bits could be provided by TAP declaration.
1411 * Plus, some taps (notably in i.MX series chips) violate
1412 * this part of the JTAG spec, so their capture mask/value
1413 * attributes might disable this test.
1415 val
= buf_get_u64(ir_test
, chain_pos
, tap
->ir_length
);
1416 if ((val
& tap
->ir_capture_mask
) != tap
->ir_capture_value
) {
1417 LOG_ERROR("%s: IR capture error; saw 0x%0*" PRIx64
" not 0x%0*" PRIx32
,
1419 (tap
->ir_length
+ 7) / tap
->ir_length
, val
,
1420 (tap
->ir_length
+ 7) / tap
->ir_length
, tap
->ir_capture_value
);
1422 retval
= ERROR_JTAG_INIT_FAILED
;
1425 LOG_DEBUG("%s: IR capture 0x%0*" PRIx64
, jtag_tap_name(tap
),
1426 (tap
->ir_length
+ 7) / tap
->ir_length
, val
);
1427 chain_pos
+= tap
->ir_length
;
1430 /* verify the '11' sentinel we wrote is returned at the end */
1431 val
= buf_get_u64(ir_test
, chain_pos
, 2);
1433 char *cbuf
= buf_to_hex_str(ir_test
, total_ir_length
);
1435 LOG_ERROR("IR capture error at bit %d, saw 0x%s not 0x...3",
1438 retval
= ERROR_JTAG_INIT_FAILED
;
1443 if (retval
!= ERROR_OK
) {
1445 jtag_execute_queue();
1450 void jtag_tap_init(struct jtag_tap
*tap
)
1452 unsigned ir_len_bits
;
1453 unsigned ir_len_bytes
;
1455 /* if we're autoprobing, cope with potentially huge ir_length */
1456 ir_len_bits
= tap
->ir_length
? tap
->ir_length
: JTAG_IRLEN_MAX
;
1457 ir_len_bytes
= DIV_ROUND_UP(ir_len_bits
, 8);
1459 tap
->expected
= calloc(1, ir_len_bytes
);
1460 tap
->expected_mask
= calloc(1, ir_len_bytes
);
1461 tap
->cur_instr
= malloc(ir_len_bytes
);
1463 /** @todo cope better with ir_length bigger than 32 bits */
1464 if (ir_len_bits
> 32)
1467 buf_set_u32(tap
->expected
, 0, ir_len_bits
, tap
->ir_capture_value
);
1468 buf_set_u32(tap
->expected_mask
, 0, ir_len_bits
, tap
->ir_capture_mask
);
1470 /* TAP will be in bypass mode after jtag_validate_ircapture() */
1472 buf_set_ones(tap
->cur_instr
, tap
->ir_length
);
1474 /* register the reset callback for the TAP */
1475 jtag_register_event_callback(&jtag_reset_callback
, tap
);
1478 LOG_DEBUG("Created Tap: %s @ abs position %d, "
1479 "irlen %d, capture: 0x%x mask: 0x%x", tap
->dotted_name
,
1480 tap
->abs_chain_position
, tap
->ir_length
,
1481 (unsigned) tap
->ir_capture_value
,
1482 (unsigned) tap
->ir_capture_mask
);
1485 void jtag_tap_free(struct jtag_tap
*tap
)
1487 jtag_unregister_event_callback(&jtag_reset_callback
, tap
);
1489 struct jtag_tap_event_action
*jteap
= tap
->event_action
;
1491 struct jtag_tap_event_action
*next
= jteap
->next
;
1492 Jim_DecrRefCount(jteap
->interp
, jteap
->body
);
1497 free(tap
->expected
);
1498 free(tap
->expected_mask
);
1499 free(tap
->expected_ids
);
1500 free(tap
->cur_instr
);
1503 free(tap
->dotted_name
);
1508 * Do low-level setup like initializing registers, output signals,
1511 int adapter_init(struct command_context
*cmd_ctx
)
1516 if (!adapter_driver
) {
1517 /* nothing was previously specified by "adapter driver" command */
1518 LOG_ERROR("Debug Adapter has to be specified, "
1519 "see \"adapter driver\" command");
1520 return ERROR_JTAG_INVALID_INTERFACE
;
1524 retval
= adapter_driver
->init();
1525 if (retval
!= ERROR_OK
)
1527 jtag
= adapter_driver
;
1530 LOG_INFO("This adapter doesn't support configurable speed");
1534 if (clock_mode
== CLOCK_MODE_UNSELECTED
) {
1535 LOG_ERROR("An adapter speed is not selected in the init script."
1536 " Insert a call to \"adapter speed\" or \"jtag_rclk\" to proceed.");
1537 return ERROR_JTAG_INIT_FAILED
;
1540 int requested_khz
= jtag_get_speed_khz();
1541 int actual_khz
= requested_khz
;
1542 int jtag_speed_var
= 0;
1543 retval
= jtag_get_speed(&jtag_speed_var
);
1544 if (retval
!= ERROR_OK
)
1546 retval
= jtag
->speed(jtag_speed_var
);
1547 if (retval
!= ERROR_OK
)
1549 retval
= jtag_get_speed_readable(&actual_khz
);
1550 if (retval
!= ERROR_OK
)
1551 LOG_INFO("adapter-specific clock speed value %d", jtag_speed_var
);
1552 else if (actual_khz
) {
1553 /* Adaptive clocking -- JTAG-specific */
1554 if ((clock_mode
== CLOCK_MODE_RCLK
)
1555 || ((clock_mode
== CLOCK_MODE_KHZ
) && !requested_khz
)) {
1556 LOG_INFO("RCLK (adaptive clock speed) not supported - fallback to %d kHz"
1559 LOG_INFO("clock speed %d kHz", actual_khz
);
1561 LOG_INFO("RCLK (adaptive clock speed)");
1566 int jtag_init_inner(struct command_context
*cmd_ctx
)
1568 struct jtag_tap
*tap
;
1570 bool issue_setup
= true;
1572 LOG_DEBUG("Init JTAG chain");
1574 tap
= jtag_tap_next_enabled(NULL
);
1576 /* Once JTAG itself is properly set up, and the scan chain
1577 * isn't absurdly large, IDCODE autoprobe should work fine.
1579 * But ... IRLEN autoprobe can fail even on systems which
1580 * are fully conformant to JTAG. Also, JTAG setup can be
1581 * quite finicky on some systems.
1583 * REVISIT: if TAP autoprobe works OK, then in many cases
1584 * we could escape to tcl code and set up targets based on
1585 * the TAP's IDCODE values.
1587 LOG_WARNING("There are no enabled taps. "
1588 "AUTO PROBING MIGHT NOT WORK!!");
1590 /* REVISIT default clock will often be too fast ... */
1594 retval
= jtag_execute_queue();
1595 if (retval
!= ERROR_OK
)
1598 /* Examine DR values first. This discovers problems which will
1599 * prevent communication ... hardware issues like TDO stuck, or
1600 * configuring the wrong number of (enabled) TAPs.
1602 retval
= jtag_examine_chain();
1605 /* complete success */
1608 /* For backward compatibility reasons, try coping with
1609 * configuration errors involving only ID mismatches.
1610 * We might be able to talk to the devices.
1612 * Also the device might be powered down during startup.
1614 * After OpenOCD starts, we can try to power on the device
1617 LOG_ERROR("Trying to use configured scan chain anyway...");
1618 issue_setup
= false;
1622 /* Now look at IR values. Problems here will prevent real
1623 * communication. They mostly mean that the IR length is
1624 * wrong ... or that the IR capture value is wrong. (The
1625 * latter is uncommon, but easily worked around: provide
1626 * ircapture/irmask values during TAP setup.)
1628 retval
= jtag_validate_ircapture();
1629 if (retval
!= ERROR_OK
) {
1630 /* The target might be powered down. The user
1631 * can power it up and reset it after firing
1634 issue_setup
= false;
1638 jtag_notify_event(JTAG_TAP_EVENT_SETUP
);
1640 LOG_WARNING("Bypassing JTAG setup events due to errors");
1646 int adapter_quit(void)
1648 if (jtag
&& jtag
->quit
) {
1649 /* close the JTAG interface */
1650 int result
= jtag
->quit();
1651 if (result
!= ERROR_OK
)
1652 LOG_ERROR("failed: %d", result
);
1655 struct jtag_tap
*t
= jtag_all_taps();
1657 struct jtag_tap
*n
= t
->next_tap
;
1665 int swd_init_reset(struct command_context
*cmd_ctx
)
1667 int retval
, retval1
;
1669 retval
= adapter_init(cmd_ctx
);
1670 if (retval
!= ERROR_OK
)
1673 LOG_DEBUG("Initializing with hard SRST reset");
1675 if (jtag_reset_config
& RESET_HAS_SRST
)
1676 retval
= adapter_system_reset(1);
1677 retval1
= adapter_system_reset(0);
1679 return (retval
== ERROR_OK
) ? retval1
: retval
;
1682 int jtag_init_reset(struct command_context
*cmd_ctx
)
1684 int retval
= adapter_init(cmd_ctx
);
1685 if (retval
!= ERROR_OK
)
1688 LOG_DEBUG("Initializing with hard TRST+SRST reset");
1691 * This procedure is used by default when OpenOCD triggers a reset.
1692 * It's now done through an overridable Tcl "init_reset" wrapper.
1694 * This started out as a more powerful "get JTAG working" reset than
1695 * jtag_init_inner(), applying TRST because some chips won't activate
1696 * JTAG without a TRST cycle (presumed to be async, though some of
1697 * those chips synchronize JTAG activation using TCK).
1699 * But some chips only activate JTAG as part of an SRST cycle; SRST
1700 * got mixed in. So it became a hard reset routine, which got used
1701 * in more places, and which coped with JTAG reset being forced as
1702 * part of SRST (srst_pulls_trst).
1704 * And even more corner cases started to surface: TRST and/or SRST
1705 * assertion timings matter; some chips need other JTAG operations;
1706 * TRST/SRST sequences can need to be different from these, etc.
1708 * Systems should override that wrapper to support system-specific
1709 * requirements that this not-fully-generic code doesn't handle.
1711 * REVISIT once Tcl code can read the reset_config modes, this won't
1712 * need to be a C routine at all...
1714 if (jtag_reset_config
& RESET_HAS_SRST
) {
1715 jtag_add_reset(1, 1);
1716 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) == 0)
1717 jtag_add_reset(0, 1);
1719 jtag_add_reset(1, 0); /* TAP_RESET, using TMS+TCK or TRST */
1722 /* some targets enable us to connect with srst asserted */
1723 if (jtag_reset_config
& RESET_CNCT_UNDER_SRST
) {
1724 if (jtag_reset_config
& RESET_SRST_NO_GATING
)
1725 jtag_add_reset(0, 1);
1727 LOG_WARNING("\'srst_nogate\' reset_config option is required");
1728 jtag_add_reset(0, 0);
1731 jtag_add_reset(0, 0);
1732 retval
= jtag_execute_queue();
1733 if (retval
!= ERROR_OK
)
1736 /* Check that we can communication on the JTAG chain + eventually we want to
1737 * be able to perform enumeration only after OpenOCD has started
1738 * telnet and GDB server
1740 * That would allow users to more easily perform any magic they need to before
1743 return jtag_init_inner(cmd_ctx
);
1746 int jtag_init(struct command_context
*cmd_ctx
)
1748 int retval
= adapter_init(cmd_ctx
);
1749 if (retval
!= ERROR_OK
)
1752 /* guard against oddball hardware: force resets to be inactive */
1753 jtag_add_reset(0, 0);
1755 /* some targets enable us to connect with srst asserted */
1756 if (jtag_reset_config
& RESET_CNCT_UNDER_SRST
) {
1757 if (jtag_reset_config
& RESET_SRST_NO_GATING
)
1758 jtag_add_reset(0, 1);
1760 LOG_WARNING("\'srst_nogate\' reset_config option is required");
1762 retval
= jtag_execute_queue();
1763 if (retval
!= ERROR_OK
)
1766 if (Jim_Eval_Named(cmd_ctx
->interp
, "jtag_init", __FILE__
, __LINE__
) != JIM_OK
)
1772 unsigned jtag_get_speed_khz(void)
1777 static int adapter_khz_to_speed(unsigned khz
, int *speed
)
1779 LOG_DEBUG("convert khz to interface specific speed value");
1783 LOG_DEBUG("have interface set up");
1785 LOG_ERROR("Translation from khz to jtag_speed not implemented");
1789 int retval
= jtag
->khz(jtag_get_speed_khz(), &speed_div1
);
1790 if (retval
!= ERROR_OK
)
1792 *speed
= speed_div1
;
1796 static int jtag_rclk_to_speed(unsigned fallback_speed_khz
, int *speed
)
1798 int retval
= adapter_khz_to_speed(0, speed
);
1799 if ((retval
!= ERROR_OK
) && fallback_speed_khz
) {
1800 LOG_DEBUG("trying fallback speed...");
1801 retval
= adapter_khz_to_speed(fallback_speed_khz
, speed
);
1806 static int jtag_set_speed(int speed
)
1809 /* this command can be called during CONFIG,
1810 * in which case jtag isn't initialized */
1811 return jtag
? jtag
->speed(speed
) : ERROR_OK
;
1814 int jtag_config_khz(unsigned khz
)
1816 LOG_DEBUG("handle jtag khz");
1817 clock_mode
= CLOCK_MODE_KHZ
;
1819 int retval
= adapter_khz_to_speed(khz
, &speed
);
1820 return (retval
!= ERROR_OK
) ? retval
: jtag_set_speed(speed
);
1823 int jtag_config_rclk(unsigned fallback_speed_khz
)
1825 LOG_DEBUG("handle jtag rclk");
1826 clock_mode
= CLOCK_MODE_RCLK
;
1827 rclk_fallback_speed_khz
= fallback_speed_khz
;
1829 int retval
= jtag_rclk_to_speed(fallback_speed_khz
, &speed
);
1830 return (retval
!= ERROR_OK
) ? retval
: jtag_set_speed(speed
);
1833 int jtag_get_speed(int *speed
)
1835 switch (clock_mode
) {
1836 case CLOCK_MODE_KHZ
:
1837 adapter_khz_to_speed(jtag_get_speed_khz(), speed
);
1839 case CLOCK_MODE_RCLK
:
1840 jtag_rclk_to_speed(rclk_fallback_speed_khz
, speed
);
1843 LOG_ERROR("BUG: unknown jtag clock mode");
1849 int jtag_get_speed_readable(int *khz
)
1851 int jtag_speed_var
= 0;
1852 int retval
= jtag_get_speed(&jtag_speed_var
);
1853 if (retval
!= ERROR_OK
)
1857 if (!jtag
->speed_div
) {
1858 LOG_ERROR("Translation from jtag_speed to khz not implemented");
1861 return jtag
->speed_div(jtag_speed_var
, khz
);
1864 void jtag_set_verify(bool enable
)
1866 jtag_verify
= enable
;
1869 bool jtag_will_verify(void)
1874 void jtag_set_verify_capture_ir(bool enable
)
1876 jtag_verify_capture_ir
= enable
;
1879 bool jtag_will_verify_capture_ir(void)
1881 return jtag_verify_capture_ir
;
1884 int jtag_power_dropout(int *dropout
)
1887 /* TODO: as the jtag interface is not valid all
1888 * we can do at the moment is exit OpenOCD */
1889 LOG_ERROR("No Valid JTAG Interface Configured.");
1892 if (jtag
->power_dropout
)
1893 return jtag
->power_dropout(dropout
);
1895 *dropout
= 0; /* by default we can't detect power dropout */
1899 int jtag_srst_asserted(int *srst_asserted
)
1901 if (jtag
->srst_asserted
)
1902 return jtag
->srst_asserted(srst_asserted
);
1904 *srst_asserted
= 0; /* by default we can't detect srst asserted */
1908 enum reset_types
jtag_get_reset_config(void)
1910 return jtag_reset_config
;
1912 void jtag_set_reset_config(enum reset_types type
)
1914 jtag_reset_config
= type
;
1917 int jtag_get_trst(void)
1919 return jtag_trst
== 1;
1921 int jtag_get_srst(void)
1923 return jtag_srst
== 1;
1926 void jtag_set_nsrst_delay(unsigned delay
)
1928 adapter_nsrst_delay
= delay
;
1930 unsigned jtag_get_nsrst_delay(void)
1932 return adapter_nsrst_delay
;
1934 void jtag_set_ntrst_delay(unsigned delay
)
1936 jtag_ntrst_delay
= delay
;
1938 unsigned jtag_get_ntrst_delay(void)
1940 return jtag_ntrst_delay
;
1944 void jtag_set_nsrst_assert_width(unsigned delay
)
1946 adapter_nsrst_assert_width
= delay
;
1948 unsigned jtag_get_nsrst_assert_width(void)
1950 return adapter_nsrst_assert_width
;
1952 void jtag_set_ntrst_assert_width(unsigned delay
)
1954 jtag_ntrst_assert_width
= delay
;
1956 unsigned jtag_get_ntrst_assert_width(void)
1958 return jtag_ntrst_assert_width
;
1961 static int jtag_select(struct command_context
*ctx
)
1965 /* NOTE: interface init must already have been done.
1966 * That works with only C code ... no Tcl glue required.
1969 retval
= jtag_register_commands(ctx
);
1971 if (retval
!= ERROR_OK
)
1974 retval
= svf_register_commands(ctx
);
1976 if (retval
!= ERROR_OK
)
1979 retval
= xsvf_register_commands(ctx
);
1981 if (retval
!= ERROR_OK
)
1984 return ipdbg_register_commands(ctx
);
1987 static struct transport jtag_transport
= {
1989 .select
= jtag_select
,
1993 static void jtag_constructor(void) __attribute__((constructor
));
1994 static void jtag_constructor(void)
1996 transport_register(&jtag_transport
);
1999 /** Returns true if the current debug session
2000 * is using JTAG as its transport.
2002 bool transport_is_jtag(void)
2004 return get_current_transport() == &jtag_transport
;
2007 int adapter_resets(int trst
, int srst
)
2009 if (!get_current_transport()) {
2010 LOG_ERROR("transport is not selected");
2014 if (transport_is_jtag()) {
2015 if (srst
== SRST_ASSERT
&& !(jtag_reset_config
& RESET_HAS_SRST
)) {
2016 LOG_ERROR("adapter has no srst signal");
2020 /* adapters without trst signal will eventually use tlr sequence */
2021 jtag_add_reset(trst
, srst
);
2023 * The jtag queue is still used for reset by some adapter. Flush it!
2024 * FIXME: To be removed when all adapter drivers will be updated!
2026 jtag_execute_queue();
2028 } else if (transport_is_swd() || transport_is_hla() ||
2029 transport_is_dapdirect_swd() || transport_is_dapdirect_jtag() ||
2030 transport_is_swim()) {
2031 if (trst
== TRST_ASSERT
) {
2032 LOG_ERROR("transport %s has no trst signal",
2033 get_current_transport()->name
);
2037 if (srst
== SRST_ASSERT
&& !(jtag_reset_config
& RESET_HAS_SRST
)) {
2038 LOG_ERROR("adapter has no srst signal");
2041 adapter_system_reset(srst
);
2045 if (trst
== TRST_DEASSERT
&& srst
== SRST_DEASSERT
)
2048 LOG_ERROR("reset is not supported on transport %s",
2049 get_current_transport()->name
);
2054 int adapter_assert_reset(void)
2056 if (transport_is_jtag()) {
2057 if (jtag_reset_config
& RESET_SRST_PULLS_TRST
)
2058 jtag_add_reset(1, 1);
2060 jtag_add_reset(0, 1);
2062 } else if (transport_is_swd() || transport_is_hla() ||
2063 transport_is_dapdirect_jtag() || transport_is_dapdirect_swd() ||
2064 transport_is_swim())
2065 return adapter_system_reset(1);
2066 else if (get_current_transport())
2067 LOG_ERROR("reset is not supported on %s",
2068 get_current_transport()->name
);
2070 LOG_ERROR("transport is not selected");
2074 int adapter_deassert_reset(void)
2076 if (transport_is_jtag()) {
2077 jtag_add_reset(0, 0);
2079 } else if (transport_is_swd() || transport_is_hla() ||
2080 transport_is_dapdirect_jtag() || transport_is_dapdirect_swd() ||
2081 transport_is_swim())
2082 return adapter_system_reset(0);
2083 else if (get_current_transport())
2084 LOG_ERROR("reset is not supported on %s",
2085 get_current_transport()->name
);
2087 LOG_ERROR("transport is not selected");
2091 int adapter_config_trace(bool enabled
, enum tpiu_pin_protocol pin_protocol
,
2092 uint32_t port_size
, unsigned int *trace_freq
,
2093 unsigned int traceclkin_freq
, uint16_t *prescaler
)
2095 if (jtag
->config_trace
) {
2096 return jtag
->config_trace(enabled
, pin_protocol
, port_size
, trace_freq
,
2097 traceclkin_freq
, prescaler
);
2098 } else if (enabled
) {
2099 LOG_ERROR("The selected interface does not support tracing");
2106 int adapter_poll_trace(uint8_t *buf
, size_t *size
)
2108 if (jtag
->poll_trace
)
2109 return jtag
->poll_trace(buf
, size
);
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)