drivers/imx_gpio: fix usage messages
[openocd.git] / src / jtag / drivers / libusb0_common.c
1 /***************************************************************************
2 * Copyright (C) 2009 by Zachary T Welch <zw@superlucidity.net> *
3 * *
4 * Copyright (C) 2011 by Mauro Gamba <maurillo71@gmail.com> *
5 * *
6 * This program is free software; you can redistribute it and/or modify *
7 * it under the terms of the GNU General Public License as published by *
8 * the Free Software Foundation; either version 2 of the License, or *
9 * (at your option) any later version. *
10 * *
11 * This program is distributed in the hope that it will be useful, *
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
14 * GNU General Public License for more details. *
15 * *
16 * You should have received a copy of the GNU General Public License *
17 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
18 ***************************************************************************/
19
20 #ifdef HAVE_CONFIG_H
21 #include "config.h"
22 #endif
23 #include "log.h"
24 #include "libusb0_common.h"
25
26 static bool jtag_libusb_match(struct jtag_libusb_device *dev,
27 const uint16_t vids[], const uint16_t pids[])
28 {
29 for (unsigned i = 0; vids[i]; i++) {
30 if (dev->descriptor.idVendor == vids[i] &&
31 dev->descriptor.idProduct == pids[i]) {
32 return true;
33 }
34 }
35 return false;
36 }
37
38 /* Returns true if the string descriptor indexed by str_index in device matches string */
39 static bool string_descriptor_equal(usb_dev_handle *device, uint8_t str_index,
40 const char *string)
41 {
42 int retval;
43 bool matched;
44 char desc_string[256+1]; /* Max size of string descriptor */
45
46 if (str_index == 0)
47 return false;
48
49 retval = usb_get_string_simple(device, str_index,
50 desc_string, sizeof(desc_string)-1);
51 if (retval < 0) {
52 LOG_ERROR("usb_get_string_simple() failed with %d", retval);
53 return false;
54 }
55
56 /* Null terminate descriptor string in case it needs to be logged. */
57 desc_string[sizeof(desc_string)-1] = '\0';
58
59 matched = strncmp(string, desc_string, sizeof(desc_string)) == 0;
60 if (!matched)
61 LOG_DEBUG("Device serial number '%s' doesn't match requested serial '%s'",
62 desc_string, string);
63 return matched;
64 }
65
66 int jtag_libusb_open(const uint16_t vids[], const uint16_t pids[],
67 const char *serial,
68 struct jtag_libusb_device_handle **out)
69 {
70 int retval = ERROR_FAIL;
71 bool serial_mismatch = false;
72 struct jtag_libusb_device_handle *libusb_handle;
73 usb_init();
74
75 usb_find_busses();
76 usb_find_devices();
77
78 struct usb_bus *busses = usb_get_busses();
79 for (struct usb_bus *bus = busses; bus; bus = bus->next) {
80 for (struct usb_device *dev = bus->devices;
81 dev; dev = dev->next) {
82 if (!jtag_libusb_match(dev, vids, pids))
83 continue;
84
85 libusb_handle = usb_open(dev);
86 if (NULL == libusb_handle) {
87 LOG_ERROR("usb_open() failed with %s", usb_strerror());
88 continue;
89 }
90
91 /* Device must be open to use libusb_get_string_descriptor_ascii. */
92 if (serial != NULL &&
93 !string_descriptor_equal(libusb_handle, dev->descriptor.iSerialNumber, serial)) {
94 serial_mismatch = true;
95 usb_close(libusb_handle);
96 continue;
97 }
98 *out = libusb_handle;
99 retval = ERROR_OK;
100 serial_mismatch = false;
101 break;
102 }
103 }
104
105 if (serial_mismatch)
106 LOG_INFO("No device matches the serial string");
107
108 return retval;
109 }
110
111 void jtag_libusb_close(jtag_libusb_device_handle *dev)
112 {
113 /* Close device */
114 usb_close(dev);
115 }
116
117 int jtag_libusb_control_transfer(jtag_libusb_device_handle *dev, uint8_t requestType,
118 uint8_t request, uint16_t wValue, uint16_t wIndex, char *bytes,
119 uint16_t size, unsigned int timeout)
120 {
121 int transferred = 0;
122
123 transferred = usb_control_msg(dev, requestType, request, wValue, wIndex,
124 bytes, size, timeout);
125
126 if (transferred < 0)
127 transferred = 0;
128
129 return transferred;
130 }
131
132 int jtag_libusb_bulk_write(jtag_libusb_device_handle *dev, int ep, char *bytes,
133 int size, int timeout)
134 {
135 return usb_bulk_write(dev, ep, bytes, size, timeout);
136 }
137
138 int jtag_libusb_bulk_read(jtag_libusb_device_handle *dev, int ep, char *bytes,
139 int size, int timeout)
140 {
141 return usb_bulk_read(dev, ep, bytes, size, timeout);
142 }
143
144 int jtag_libusb_set_configuration(jtag_libusb_device_handle *devh,
145 int configuration)
146 {
147 struct jtag_libusb_device *udev = jtag_libusb_get_device(devh);
148
149 return usb_set_configuration(devh,
150 udev->config[configuration].bConfigurationValue);
151 }
152
153 int jtag_libusb_choose_interface(struct jtag_libusb_device_handle *devh,
154 unsigned int *usb_read_ep,
155 unsigned int *usb_write_ep,
156 int bclass, int subclass, int protocol, int trans_type)
157 {
158 struct jtag_libusb_device *udev = jtag_libusb_get_device(devh);
159 struct usb_interface *iface = udev->config->interface;
160 struct usb_interface_descriptor *desc = iface->altsetting;
161
162 *usb_read_ep = *usb_write_ep = 0;
163
164 for (int i = 0; i < desc->bNumEndpoints; i++) {
165 if ((bclass > 0 && desc->bInterfaceClass != bclass) ||
166 (subclass > 0 && desc->bInterfaceSubClass != subclass) ||
167 (protocol > 0 && desc->bInterfaceProtocol != protocol) ||
168 (trans_type > 0 && (desc->endpoint[i].bmAttributes & 0x3) != trans_type))
169 continue;
170
171 uint8_t epnum = desc->endpoint[i].bEndpointAddress;
172 bool is_input = epnum & 0x80;
173 LOG_DEBUG("usb ep %s %02x", is_input ? "in" : "out", epnum);
174 if (is_input)
175 *usb_read_ep = epnum;
176 else
177 *usb_write_ep = epnum;
178
179 if (*usb_read_ep && *usb_write_ep) {
180 LOG_DEBUG("Claiming interface %d", (int)desc->bInterfaceNumber);
181 usb_claim_interface(devh, (int)desc->bInterfaceNumber);
182 return ERROR_OK;
183 }
184 }
185
186 return ERROR_FAIL;
187 }
188
189 int jtag_libusb_get_pid(struct jtag_libusb_device *dev, uint16_t *pid)
190 {
191 if (!dev)
192 return ERROR_FAIL;
193
194 *pid = dev->descriptor.idProduct;
195 return ERROR_OK;
196 }

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)