Code Review / openocd.git / blob
? search:


dcffd2fba02e7f0d3aface879304d93edc78869b
[openocd.git] / src / jtag / drivers / ti_icdi_usb.c
1 /***************************************************************************
2 * *
3 * Copyright (C) 2012 by Spencer Oliver *
4 * spen@spen-soft.co.uk *
5 * *
6 * This program is free software; you can redistribute it and/or modify *
7 * it under the terms of the GNU General Public License as published by *
8 * the Free Software Foundation; either version 2 of the License, or *
9 * (at your option) any later version. *
10 * *
11 * This program is distributed in the hope that it will be useful, *
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
14 * GNU General Public License for more details. *
15 * *
16 * You should have received a copy of the GNU General Public License *
17 * along with this program; if not, write to the *
18 * Free Software Foundation, Inc., *
19 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
20 ***************************************************************************/
21
22 #ifdef HAVE_CONFIG_H
23 #include "config.h"
24 #endif
25
26 /* project specific includes */
27 #include <helper/binarybuffer.h>
28 #include <jtag/interface.h>
29 #include <jtag/hla/hla_layout.h>
30 #include <jtag/hla/hla_transport.h>
31 #include <jtag/hla/hla_interface.h>
32 #include <target/target.h>
33
34 #include <target/cortex_m.h>
35
36 #include <libusb-1.0/libusb.h>
37
38 #define ICDI_WRITE_ENDPOINT 0x02
39 #define ICDI_READ_ENDPOINT 0x83
40
41 #define ICDI_WRITE_TIMEOUT 1000
42 #define ICDI_READ_TIMEOUT 1000
43 #define ICDI_PACKET_SIZE 2048
44
45 #define PACKET_START "$"
46 #define PACKET_END "#"
47
48 struct icdi_usb_handle_s {
49 libusb_context *usb_ctx;
50 libusb_device_handle *usb_dev;
51
52 char *read_buffer;
53 char *write_buffer;
54 int max_packet;
55 int read_count;
56 };
57
58 static int icdi_usb_read_mem32(void *handle, uint32_t addr, uint16_t len, uint8_t *buffer);
59 static int icdi_usb_write_mem32(void *handle, uint32_t addr, uint16_t len, const uint8_t *buffer);
60
61 static int remote_escape_output(const char *buffer, int len, char *out_buf, int *out_len, int out_maxlen)
62 {
63 int input_index, output_index;
64
65 output_index = 0;
66
67 for (input_index = 0; input_index < len; input_index++) {
68
69 char b = buffer[input_index];
70
71 if (b == '$' || b == '#' || b == '}' || b == '*') {
72 /* These must be escaped. */
73 if (output_index + 2 > out_maxlen)
74 break;
75 out_buf[output_index++] = '}';
76 out_buf[output_index++] = b ^ 0x20;
77 } else {
78 if (output_index + 1 > out_maxlen)
79 break;
80 out_buf[output_index++] = b;
81 }
82 }
83
84 *out_len = input_index;
85 return output_index;
86 }
87
88 static int remote_unescape_input(const char *buffer, int len, char *out_buf, int out_maxlen)
89 {
90 int input_index, output_index;
91 int escaped;
92
93 output_index = 0;
94 escaped = 0;
95
96 for (input_index = 0; input_index < len; input_index++) {
97
98 char b = buffer[input_index];
99
100 if (output_index + 1 > out_maxlen)
101 LOG_ERROR("Received too much data from the target.");
102
103 if (escaped) {
104 out_buf[output_index++] = b ^ 0x20;
105 escaped = 0;
106 } else if (b == '}')
107 escaped = 1;
108 else
109 out_buf[output_index++] = b;
110 }
111
112 if (escaped)
113 LOG_ERROR("Unmatched escape character in target response.");
114
115 return output_index;
116 }
117
118 static int icdi_send_packet(void *handle, int len)
119 {
120 unsigned char cksum = 0;
121 struct icdi_usb_handle_s *h;
122 int result, retry = 0;
123 int transferred = 0;
124
125 assert(handle != NULL);
126 h = (struct icdi_usb_handle_s *)handle;
127
128 /* check we have a large enough buffer for checksum "#00" */
129 if (len + 3 > h->max_packet) {
130 LOG_ERROR("packet buffer too small");
131 return ERROR_FAIL;
132 }
133
134 /* calculate checksum - offset start of packet */
135 for (int i = 1; i < len; i++)
136 cksum += h->write_buffer[i];
137
138 len += sprintf(&h->write_buffer[len], PACKET_END "%02x", cksum);
139
140 #ifdef _DEBUG_USB_COMMS_
141 char buffer[50];
142 char ch = h->write_buffer[1];
143 if (ch == 'x' || ch == 'X')
144 LOG_DEBUG("writing packet: <binary>");
145 else {
146 memcpy(buffer, h->write_buffer, len >= 50 ? 50-1 : len);
147 buffer[len] = 0;
148 LOG_DEBUG("writing packet: %s", buffer);
149 }
150 #endif
151
152 while (1) {
153
154 result = libusb_bulk_transfer(h->usb_dev, ICDI_WRITE_ENDPOINT, (unsigned char *)h->write_buffer, len,
155 &transferred, ICDI_WRITE_TIMEOUT);
156 if (result != 0 || transferred != len) {
157 LOG_DEBUG("Error TX Data %d", result);
158 return ERROR_FAIL;
159 }
160
161 /* check that the client got the message ok, or shall we resend */
162 result = libusb_bulk_transfer(h->usb_dev, ICDI_READ_ENDPOINT, (unsigned char *)h->read_buffer, h->max_packet,
163 &transferred, ICDI_READ_TIMEOUT);
164 if (result != 0 || transferred < 1) {
165 LOG_DEBUG("Error RX Data %d", result);
166 return ERROR_FAIL;
167 }
168
169 #ifdef _DEBUG_USB_COMMS_
170 LOG_DEBUG("received reply: '%c' : count %d", h->read_buffer[0], transferred);
171 #endif
172
173 if (h->read_buffer[0] == '-') {
174 LOG_DEBUG("Resending packet %d", ++retry);
175 } else {
176 if (h->read_buffer[0] != '+')
177 LOG_DEBUG("Unexpected Reply from ICDI: %c", h->read_buffer[0]);
178 break;
179 }
180
181 if (retry == 3) {
182 LOG_DEBUG("maximum nack retries attempted");
183 return ERROR_FAIL;
184 }
185 }
186
187 retry = 0;
188 h->read_count = transferred;
189
190 while (1) {
191
192 /* read reply from icdi */
193 result = libusb_bulk_transfer(h->usb_dev, ICDI_READ_ENDPOINT, (unsigned char *)h->read_buffer + h->read_count,
194 h->max_packet - h->read_count, &transferred, ICDI_READ_TIMEOUT);
195
196 #ifdef _DEBUG_USB_COMMS_
197 LOG_DEBUG("received data: count %d", transferred);
198 #endif
199
200 /* check for errors but retry for timeout */
201 if (result != 0) {
202
203 if (result == LIBUSB_ERROR_TIMEOUT) {
204 LOG_DEBUG("Error RX timeout %d", result);
205 } else {
206 LOG_DEBUG("Error RX Data %d", result);
207 return ERROR_FAIL;
208 }
209 }
210
211 h->read_count += transferred;
212
213 /* we need to make sure we have a full packet, including checksum */
214 if (h->read_count > 5) {
215
216 /* check that we have received an packet delimiter
217 * we do not validate the checksum
218 * reply should contain $...#AA - so we check for # */
219 if (h->read_buffer[h->read_count - 3] == '#')
220 return ERROR_OK;
221 }
222
223 if (retry++ == 3) {
224 LOG_DEBUG("maximum data retries attempted");
225 break;
226 }
227 }
228
229 return ERROR_FAIL;
230 }
231
232 static int icdi_send_cmd(void *handle, const char *cmd)
233 {
234 struct icdi_usb_handle_s *h;
235 h = (struct icdi_usb_handle_s *)handle;
236
237 int cmd_len = snprintf(h->write_buffer, h->max_packet, PACKET_START "%s", cmd);
238 return icdi_send_packet(handle, cmd_len);
239 }
240
241 static int icdi_send_remote_cmd(void *handle, const char *data)
242 {
243 struct icdi_usb_handle_s *h;
244 h = (struct icdi_usb_handle_s *)handle;
245
246 size_t cmd_len = sprintf(h->write_buffer, PACKET_START "qRcmd,");
247 cmd_len += hexify(h->write_buffer + cmd_len, data, 0, h->max_packet - cmd_len);
248
249 return icdi_send_packet(handle, cmd_len);
250 }
251
252 static int icdi_get_cmd_result(void *handle)
253 {
254 struct icdi_usb_handle_s *h;
255 int offset = 0;
256 char ch;
257
258 assert(handle != NULL);
259 h = (struct icdi_usb_handle_s *)handle;
260
261 do {
262 ch = h->read_buffer[offset++];
263 if (offset > h->read_count)
264 return ERROR_FAIL;
265 } while (ch != '$');
266
267 if (memcmp("OK", h->read_buffer + offset, 2) == 0)
268 return ERROR_OK;
269
270 if (h->read_buffer[offset] == 'E') {
271 /* get error code */
272 char result;
273 if (unhexify(&result, h->read_buffer + offset + 1, 1) != 1)
274 return ERROR_FAIL;
275 return result;
276 }
277
278 /* for now we assume everything else is ok */
279 return ERROR_OK;
280 }
281
282 static int icdi_usb_idcode(void *handle, uint32_t *idcode)
283 {
284 return ERROR_OK;
285 }
286
287 static int icdi_usb_write_debug_reg(void *handle, uint32_t addr, uint32_t val)
288 {
289 return icdi_usb_write_mem32(handle, addr, 1, (uint8_t *)&val);
290 }
291
292 static enum target_state icdi_usb_state(void *handle)
293 {
294 int result;
295 struct icdi_usb_handle_s *h;
296 uint32_t dhcsr;
297
298 h = (struct icdi_usb_handle_s *)handle;
299
300 result = icdi_usb_read_mem32(h, DCB_DHCSR, 1, (uint8_t *)&dhcsr);
301 if (result != ERROR_OK)
302 return TARGET_UNKNOWN;
303
304 if (dhcsr & S_HALT)
305 return TARGET_HALTED;
306
307 return TARGET_RUNNING;
308 }
309
310 static int icdi_usb_version(void *handle)
311 {
312 struct icdi_usb_handle_s *h;
313 h = (struct icdi_usb_handle_s *)handle;
314
315 char version[20];
316
317 /* get info about icdi */
318 int result = icdi_send_remote_cmd(handle, "version");
319 if (result != ERROR_OK)
320 return result;
321
322 if (h->read_count < 8) {
323 LOG_ERROR("Invalid Reply Received");
324 return ERROR_FAIL;
325 }
326
327 /* convert reply */
328 if (unhexify(version, h->read_buffer + 2, 4) != 4) {
329 LOG_WARNING("unable to get ICDI version");
330 return ERROR_OK;
331 }
332
333 /* null terminate and print info */
334 version[4] = 0;
335
336 LOG_INFO("ICDI Firmware version: %s", version);
337
338 return ERROR_OK;
339 }
340
341 static int icdi_usb_query(void *handle)
342 {
343 int result;
344
345 struct icdi_usb_handle_s *h;
346 h = (struct icdi_usb_handle_s *)handle;
347
348 result = icdi_send_cmd(handle, "qSupported");
349 if (result != ERROR_OK)
350 return result;
351
352 /* check result */
353 result = icdi_get_cmd_result(handle);
354 if (result != ERROR_OK) {
355 LOG_ERROR("query supported failed: 0x%x", result);
356 return ERROR_FAIL;
357 }
358
359 /* from this we can get the max packet supported */
360
361 /* query packet buffer size */
362 char *offset = strstr(h->read_buffer, "PacketSize");
363 if (offset) {
364 char *separator;
365 int max_packet;
366
367 max_packet = strtoul(offset + 11, &separator, 16);
368 if (!max_packet)
369 LOG_ERROR("invalid max packet, using defaults");
370 else
371 h->max_packet = max_packet;
372 LOG_DEBUG("max packet supported : %" PRIu32 " bytes", h->max_packet);
373 }
374
375
376 /* if required re allocate packet buffer */
377 if (h->max_packet != ICDI_PACKET_SIZE) {
378 h->read_buffer = realloc(h->read_buffer, h->max_packet);
379 h->write_buffer = realloc(h->write_buffer, h->max_packet);
380 if (h->read_buffer == 0 || h->write_buffer == 0) {
381 LOG_ERROR("unable to reallocate memory");
382 return ERROR_FAIL;
383 }
384 }
385
386 /* set extended mode */
387 result = icdi_send_cmd(handle, "!");
388
389 /* check result */
390 result = icdi_get_cmd_result(handle);
391 if (result != ERROR_OK) {
392 LOG_ERROR("unable to enable extended mode: 0x%x", result);
393 return ERROR_FAIL;
394 }
395
396 return ERROR_OK;
397 }
398
399 static int icdi_usb_reset(void *handle)
400 {
401 /* we do this in hla_target.c */
402 return ERROR_OK;
403 }
404
405 static int icdi_usb_assert_srst(void *handle, int srst)
406 {
407 /* TODO not supported yet */
408 return ERROR_COMMAND_NOTFOUND;
409 }
410
411 static int icdi_usb_run(void *handle)
412 {
413 int result;
414
415 /* resume target at current address */
416 result = icdi_send_cmd(handle, "c");
417 if (result != ERROR_OK)
418 return result;
419
420 /* check result */
421 result = icdi_get_cmd_result(handle);
422 if (result != ERROR_OK) {
423 LOG_ERROR("continue failed: 0x%x", result);
424 return ERROR_FAIL;
425 }
426
427 return result;
428 }
429
430 static int icdi_usb_halt(void *handle)
431 {
432 int result;
433
434 /* this query halts the target ?? */
435 result = icdi_send_cmd(handle, "?");
436 if (result != ERROR_OK)
437 return result;
438
439 /* check result */
440 result = icdi_get_cmd_result(handle);
441 if (result != ERROR_OK) {
442 LOG_ERROR("halt failed: 0x%x", result);
443 return ERROR_FAIL;
444 }
445
446 return result;
447 }
448
449 static int icdi_usb_step(void *handle)
450 {
451 int result;
452
453 /* step target at current address */
454 result = icdi_send_cmd(handle, "s");
455 if (result != ERROR_OK)
456 return result;
457
458 /* check result */
459 result = icdi_get_cmd_result(handle);
460 if (result != ERROR_OK) {
461 LOG_ERROR("step failed: 0x%x", result);
462 return ERROR_FAIL;
463 }
464
465 return result;
466 }
467
468 static int icdi_usb_read_regs(void *handle)
469 {
470 /* currently unsupported */
471 return ERROR_OK;
472 }
473
474 static int icdi_usb_read_reg(void *handle, int num, uint32_t *val)
475 {
476 int result;
477 struct icdi_usb_handle_s *h;
478 char cmd[10];
479
480 h = (struct icdi_usb_handle_s *)handle;
481
482 snprintf(cmd, sizeof(cmd), "p%x", num);
483 result = icdi_send_cmd(handle, cmd);
484 if (result != ERROR_OK)
485 return result;
486
487 /* check result */
488 result = icdi_get_cmd_result(handle);
489 if (result != ERROR_OK) {
490 LOG_ERROR("register read failed: 0x%x", result);
491 return ERROR_FAIL;
492 }
493
494 /* convert result */
495 if (unhexify((char *)val, h->read_buffer + 2, 4) != 4) {
496 LOG_ERROR("failed to convert result");
497 return ERROR_FAIL;
498 }
499
500 return result;
501 }
502
503 static int icdi_usb_write_reg(void *handle, int num, uint32_t val)
504 {
505 int result;
506 char cmd[20];
507
508 int cmd_len = snprintf(cmd, sizeof(cmd), "P%x=", num);
509 hexify(cmd + cmd_len, (char *)&val, 4, sizeof(cmd));
510
511 result = icdi_send_cmd(handle, cmd);
512 if (result != ERROR_OK)
513 return result;
514
515 /* check result */
516 result = icdi_get_cmd_result(handle);
517 if (result != ERROR_OK) {
518 LOG_ERROR("register write failed: 0x%x", result);
519 return ERROR_FAIL;
520 }
521
522 return result;
523 }
524
525 static int icdi_usb_read_mem(void *handle, uint32_t addr, uint32_t len, uint8_t *buffer)
526 {
527 int result;
528 struct icdi_usb_handle_s *h;
529 char cmd[20];
530
531 h = (struct icdi_usb_handle_s *)handle;
532
533 snprintf(cmd, sizeof(cmd), "x%x,%x", addr, len);
534 result = icdi_send_cmd(handle, cmd);
535 if (result != ERROR_OK)
536 return result;
537
538 /* check result */
539 result = icdi_get_cmd_result(handle);
540 if (result != ERROR_OK) {
541 LOG_ERROR("memory read failed: 0x%x", result);
542 return ERROR_FAIL;
543 }
544
545 /* unescape input */
546 int read_len = remote_unescape_input(h->read_buffer + 5, h->read_count - 8, (char *)buffer, len);
547 if (read_len != (int)len) {
548 LOG_ERROR("read more bytes than expected: actual 0x%" PRIx32 " expected 0x%" PRIx32, read_len, len);
549 return ERROR_FAIL;
550 }
551
552 return ERROR_OK;
553 }
554
555 static int icdi_usb_write_mem(void *handle, uint32_t addr, uint32_t len, const uint8_t *buffer)
556 {
557 int result;
558 struct icdi_usb_handle_s *h;
559
560 h = (struct icdi_usb_handle_s *)handle;
561
562 size_t cmd_len = snprintf(h->write_buffer, h->max_packet, PACKET_START "X%x,%x:", addr, len);
563
564 int out_len;
565 cmd_len += remote_escape_output((char *)buffer, len, h->write_buffer + cmd_len,
566 &out_len, h->max_packet - cmd_len);
567
568 if (out_len < (int)len) {
569 /* for now issue a error as we have no way of allocating a larger buffer */
570 LOG_ERROR("memory buffer too small: requires 0x%" PRIx32 " actual 0x%" PRIx32, out_len, len);
571 return ERROR_FAIL;
572 }
573
574 result = icdi_send_packet(handle, cmd_len);
575 if (result != ERROR_OK)
576 return result;
577
578 /* check result */
579 result = icdi_get_cmd_result(handle);
580 if (result != ERROR_OK) {
581 LOG_ERROR("memory write failed: 0x%x", result);
582 return ERROR_FAIL;
583 }
584
585 return ERROR_OK;
586 }
587
588 static int icdi_usb_read_mem8(void *handle, uint32_t addr, uint16_t len, uint8_t *buffer)
589 {
590 return icdi_usb_read_mem(handle, addr, len, buffer);
591 }
592
593 static int icdi_usb_write_mem8(void *handle, uint32_t addr, uint16_t len, const uint8_t *buffer)
594 {
595 return icdi_usb_write_mem(handle, addr, len, buffer);
596 }
597
598 static int icdi_usb_read_mem32(void *handle, uint32_t addr, uint16_t len, uint8_t *buffer)
599 {
600 return icdi_usb_read_mem(handle, addr, len * 4, buffer);
601 }
602
603 static int icdi_usb_write_mem32(void *handle, uint32_t addr, uint16_t len, const uint8_t *buffer)
604 {
605 return icdi_usb_write_mem(handle, addr, len * 4, buffer);
606 }
607
608 static int icdi_usb_close(void *handle)
609 {
610 struct icdi_usb_handle_s *h;
611
612 h = (struct icdi_usb_handle_s *)handle;
613
614 if (h->usb_dev)
615 libusb_close(h->usb_dev);
616
617 if (h->usb_ctx)
618 libusb_exit(h->usb_ctx);
619
620 if (h->read_buffer)
621 free(h->read_buffer);
622
623 if (h->write_buffer)
624 free(h->write_buffer);
625
626 free(handle);
627
628 return ERROR_OK;
629 }
630
631 static int icdi_usb_open(struct hl_interface_param_s *param, void **fd)
632 {
633 int retval;
634 struct icdi_usb_handle_s *h;
635
636 LOG_DEBUG("icdi_usb_open");
637
638 h = calloc(1, sizeof(struct icdi_usb_handle_s));
639
640 if (h == 0) {
641 LOG_ERROR("unable to allocate memory");
642 return ERROR_FAIL;
643 }
644
645 LOG_DEBUG("transport: %d vid: 0x%04x pid: 0x%04x", param->transport,
646 param->vid, param->pid);
647
648 if (libusb_init(&h->usb_ctx) != 0) {
649 LOG_ERROR("libusb init failed");
650 goto error_open;
651 }
652
653 h->usb_dev = libusb_open_device_with_vid_pid(h->usb_ctx, param->vid, param->pid);
654 if (!h->usb_dev) {
655 LOG_ERROR("open failed");
656 goto error_open;
657 }
658
659 if (libusb_claim_interface(h->usb_dev, 2)) {
660 LOG_DEBUG("claim interface failed");
661 goto error_open;
662 }
663
664 /* check if mode is supported */
665 retval = ERROR_OK;
666
667 switch (param->transport) {
668 #if 0
669 /* TODO place holder as swd is not currently supported */
670 case HL_TRANSPORT_SWD:
671 #endif
672 case HL_TRANSPORT_JTAG:
673 break;
674 default:
675 retval = ERROR_FAIL;
676 break;
677 }
678
679 if (retval != ERROR_OK) {
680 LOG_ERROR("mode (transport) not supported by device");
681 goto error_open;
682 }
683
684 /* allocate buffer */
685 h->read_buffer = malloc(ICDI_PACKET_SIZE);
686 h->write_buffer = malloc(ICDI_PACKET_SIZE);
687 h->max_packet = ICDI_PACKET_SIZE;
688
689 if (h->read_buffer == 0 || h->write_buffer == 0) {
690 LOG_DEBUG("malloc failed");
691 goto error_open;
692 }
693
694 /* query icdi version etc */
695 retval = icdi_usb_version(h);
696 if (retval != ERROR_OK)
697 goto error_open;
698
699 /* query icdi support */
700 retval = icdi_usb_query(h);
701 if (retval != ERROR_OK)
702 goto error_open;
703
704 *fd = h;
705
706 /* set the max target read/write buffer in bytes
707 * as we are using gdb binary packets to transfer memory we have to
708 * reserve half the buffer for any possible escape chars plus
709 * at least 64 bytes for the gdb packet header */
710 param->max_buffer = (((h->max_packet - 64) / 4) * 4) / 2;
711
712 return ERROR_OK;
713
714 error_open:
715 icdi_usb_close(h);
716
717 return ERROR_FAIL;
718 }
719
720 struct hl_layout_api_s icdi_usb_layout_api = {
721 .open = icdi_usb_open,
722 .close = icdi_usb_close,
723 .idcode = icdi_usb_idcode,
724 .state = icdi_usb_state,
725 .reset = icdi_usb_reset,
726 .assert_srst = icdi_usb_assert_srst,
727 .run = icdi_usb_run,
728 .halt = icdi_usb_halt,
729 .step = icdi_usb_step,
730 .read_regs = icdi_usb_read_regs,
731 .read_reg = icdi_usb_read_reg,
732 .write_reg = icdi_usb_write_reg,
733 .read_mem8 = icdi_usb_read_mem8,
734 .write_mem8 = icdi_usb_write_mem8,
735 .read_mem32 = icdi_usb_read_mem32,
736 .write_mem32 = icdi_usb_write_mem32,
737 .write_debug_reg = icdi_usb_write_debug_reg
738 };
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)