2527fe9a6315f41dd856ac80622b6a9867b635f6
[openocd.git] / src / jtag / drivers / usb_blaster / ublast_access_ftdi.c
1 /*
2 * Driver for USB-JTAG, Altera USB-Blaster and compatibles
3 *
4 * Inspired from original code from Kolja Waschk's USB-JTAG project
5 * (http://www.ixo.de/info/usb_jtag/), and from openocd project.
6 *
7 * Copyright (C) 2012 Robert Jarzmik robert.jarzmik@free.fr
8 * Copyright (C) 2011 Ali Lown ali@lown.me.uk
9 * Copyright (C) 2009 Catalin Patulea cat@vv.carleton.ca
10 * Copyright (C) 2006 Kolja Waschk usbjtag@ixo.de
11 *
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License as published by
14 * the Free Software Foundation; either version 2 of the License, or
15 * (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 */
23
24 #ifdef HAVE_CONFIG_H
25 #include <config.h>
26 #endif
27 #include <jtag/interface.h>
28 #include <jtag/commands.h>
29
30 #include "ublast_access.h"
31 #include <ftdi.h>
32
33 static struct ftdi_context *ublast_getftdic(struct ublast_lowlevel *low)
34 {
35 return low->priv;
36 }
37
38 static int ublast_ftdi_read(struct ublast_lowlevel *low, uint8_t *buf,
39 unsigned size, uint32_t *bytes_read)
40 {
41 int retval;
42 int timeout = 100;
43 struct ftdi_context *ftdic = ublast_getftdic(low);
44
45 *bytes_read = 0;
46 while ((*bytes_read < size) && timeout--) {
47 retval = ftdi_read_data(ftdic, buf + *bytes_read,
48 size - *bytes_read);
49 if (retval < 0) {
50 *bytes_read = 0;
51 LOG_ERROR("ftdi_read_data: %s",
52 ftdi_get_error_string(ftdic));
53 return ERROR_JTAG_DEVICE_ERROR;
54 }
55 *bytes_read += retval;
56 }
57 return ERROR_OK;
58 }
59
60 static int ublast_ftdi_write(struct ublast_lowlevel *low, uint8_t *buf, int size,
61 uint32_t *bytes_written)
62 {
63 int retval;
64 struct ftdi_context *ftdic = ublast_getftdic(low);
65
66 retval = ftdi_write_data(ftdic, buf, size);
67 if (retval < 0) {
68 *bytes_written = 0;
69 LOG_ERROR("ftdi_write_data: %s",
70 ftdi_get_error_string(ftdic));
71 return ERROR_JTAG_DEVICE_ERROR;
72 }
73 *bytes_written = retval;
74 return ERROR_OK;
75 }
76
77 static int ublast_ftdi_init(struct ublast_lowlevel *low)
78 {
79 uint8_t latency_timer;
80 struct ftdi_context *ftdic = ublast_getftdic(low);
81
82 LOG_INFO("usb blaster interface using libftdi");
83 if (ftdi_init(ftdic) < 0)
84 return ERROR_JTAG_INIT_FAILED;
85
86 /* context, vendor id, product id */
87 if (ftdi_usb_open(ftdic, low->ublast_vid, low->ublast_pid) < 0) {
88 LOG_ERROR("unable to open ftdi device: %s", ftdic->error_str);
89 return ERROR_JTAG_INIT_FAILED;
90 }
91
92 if (ftdi_usb_reset(ftdic) < 0) {
93 LOG_ERROR("unable to reset ftdi device");
94 return ERROR_JTAG_INIT_FAILED;
95 }
96
97 if (ftdi_set_latency_timer(ftdic, 2) < 0) {
98 LOG_ERROR("unable to set latency timer");
99 return ERROR_JTAG_INIT_FAILED;
100 }
101
102 if (ftdi_get_latency_timer(ftdic, &latency_timer) < 0)
103 LOG_ERROR("unable to get latency timer");
104 else
105 LOG_DEBUG("current latency timer: %u", latency_timer);
106
107 ftdi_disable_bitbang(ftdic);
108 return ERROR_OK;
109 }
110
111 static int ublast_ftdi_quit(struct ublast_lowlevel *low)
112 {
113 struct ftdi_context *ftdic = ublast_getftdic(low);
114
115 ftdi_usb_close(ftdic);
116 ftdi_deinit(ftdic);
117 return ERROR_OK;
118 };
119
120 static struct ublast_lowlevel_priv {
121 struct ftdi_context ftdic;
122 } info;
123
124 static struct ublast_lowlevel low = {
125 .open = ublast_ftdi_init,
126 .close = ublast_ftdi_quit,
127 .read = ublast_ftdi_read,
128 .write = ublast_ftdi_write,
129 .priv = &info,
130 };
131
132 struct ublast_lowlevel *ublast_register_ftdi(void)
133 {
134 return &low;
135 }

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)