1 /***************************************************************************
2 * Copyright (C) 2004, 2006 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
8 * Copyright (C) 2009 by SoftPLC Corporation. http://softplc.com *
9 * Dick Hollenbeck <dick@softplc.com> *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
25 ***************************************************************************/
28 /* This code uses information contained in the MPSSE specification which was
30 * http://www.ftdichip.com/Documents/AppNotes/AN2232C-01_MPSSE_Cmnd.pdf
31 * Hereafter this is called the "MPSSE Spec".
33 * The datasheet for the ftdichip.com's FT2232D part is here:
34 * http://www.ftdichip.com/Documents/DataSheets/DS_FT2232D.pdf
42 /* project specific includes */
43 #include "interface.h"
45 #include "time_support.h"
53 #if (BUILD_FT2232_FTD2XX==1 && BUILD_FT2232_LIBFTDI==1)
54 #error "BUILD_FT2232_FTD2XX && BUILD_FT2232_LIBFTDI are mutually exclusive"
55 #elif(BUILD_FT2232_FTD2XX!=1 && BUILD_FT2232_LIBFTDI!=1)
56 #error "BUILD_FT2232_FTD2XX || BUILD_FT2232_LIBFTDI must be chosen"
59 /* FT2232 access library includes */
60 #if BUILD_FT2232_FTD2XX == 1
62 #elif BUILD_FT2232_LIBFTDI == 1
66 /* max TCK for the high speed devices 30000 kHz */
67 #define FTDI_2232H_4232H_MAX_TCK 30000
69 static int ft2232_execute_queue(void);
71 static int ft2232_speed(int speed
);
72 static int ft2232_speed_div(int speed
, int* khz
);
73 static int ft2232_khz(int khz
, int* jtag_speed
);
74 static int ft2232_register_commands(struct command_context_s
* cmd_ctx
);
75 static int ft2232_init(void);
76 static int ft2232_quit(void);
78 static int ft2232_handle_device_desc_command(struct command_context_s
* cmd_ctx
, char* cmd
, char** args
, int argc
);
79 static int ft2232_handle_serial_command(struct command_context_s
* cmd_ctx
, char* cmd
, char** args
, int argc
);
80 static int ft2232_handle_layout_command(struct command_context_s
* cmd_ctx
, char* cmd
, char** args
, int argc
);
81 static int ft2232_handle_vid_pid_command(struct command_context_s
* cmd_ctx
, char* cmd
, char** args
, int argc
);
82 static int ft2232_handle_latency_command(struct command_context_s
* cmd_ctx
, char* cmd
, char** args
, int argc
);
86 * Send out \a num_cycles on the TCK line while the TAP(s) are in a
87 * stable state. Calling code must ensure that current state is stable,
88 * that verification is not done in here.
90 * @param num_cycles The number of clocks cycles to send.
91 * @param cmd The command to send.
93 * @returns ERROR_OK on success, or ERROR_JTAG_QUEUE_FAILED on failure.
95 static int ft2232_stableclocks(int num_cycles
, jtag_command_t
* cmd
);
97 /* max TCK for the high speed devices 30000 kHz */
98 #define FTDI_2232H_4232H_MAX_TCK 30000
100 static char * ft2232_device_desc_A
= NULL
;
101 static char* ft2232_device_desc
= NULL
;
102 static char* ft2232_serial
= NULL
;
103 static char* ft2232_layout
= NULL
;
104 static u8 ft2232_latency
= 2;
105 static unsigned ft2232_max_tck
= 6000;
108 #define MAX_USB_IDS 8
109 /* vid = pid = 0 marks the end of the list */
110 static u16 ft2232_vid
[MAX_USB_IDS
+ 1] = { 0x0403, 0 };
111 static u16 ft2232_pid
[MAX_USB_IDS
+ 1] = { 0x6010, 0 };
113 typedef struct ft2232_layout_s
117 void (*reset
)(int trst
, int srst
);
121 /* init procedures for supported layouts */
122 static int usbjtag_init(void);
123 static int jtagkey_init(void);
124 static int olimex_jtag_init(void);
125 static int flyswatter_init(void);
126 static int turtle_init(void);
127 static int comstick_init(void);
128 static int stm32stick_init(void);
129 static int axm0432_jtag_init(void);
130 static int sheevaplug_init(void);
131 static int icebear_jtag_init(void);
132 static int cortino_jtag_init(void);
134 /* reset procedures for supported layouts */
135 static void usbjtag_reset(int trst
, int srst
);
136 static void jtagkey_reset(int trst
, int srst
);
137 static void olimex_jtag_reset(int trst
, int srst
);
138 static void flyswatter_reset(int trst
, int srst
);
139 static void turtle_reset(int trst
, int srst
);
140 static void comstick_reset(int trst
, int srst
);
141 static void stm32stick_reset(int trst
, int srst
);
142 static void axm0432_jtag_reset(int trst
, int srst
);
143 static void sheevaplug_reset(int trst
, int srst
);
144 static void icebear_jtag_reset(int trst
, int srst
);
146 /* blink procedures for layouts that support a blinking led */
147 static void olimex_jtag_blink(void);
148 static void flyswatter_jtag_blink(void);
149 static void turtle_jtag_blink(void);
151 static const ft2232_layout_t ft2232_layouts
[] =
153 { "usbjtag", usbjtag_init
, usbjtag_reset
, NULL
},
154 { "jtagkey", jtagkey_init
, jtagkey_reset
, NULL
},
155 { "jtagkey_prototype_v1", jtagkey_init
, jtagkey_reset
, NULL
},
156 { "oocdlink", jtagkey_init
, jtagkey_reset
, NULL
},
157 { "signalyzer", usbjtag_init
, usbjtag_reset
, NULL
},
158 { "evb_lm3s811", usbjtag_init
, usbjtag_reset
, NULL
},
159 { "olimex-jtag", olimex_jtag_init
, olimex_jtag_reset
, olimex_jtag_blink
},
160 { "flyswatter", flyswatter_init
, flyswatter_reset
, flyswatter_jtag_blink
},
161 { "turtelizer2", turtle_init
, turtle_reset
, turtle_jtag_blink
},
162 { "comstick", comstick_init
, comstick_reset
, NULL
},
163 { "stm32stick", stm32stick_init
, stm32stick_reset
, NULL
},
164 { "axm0432_jtag", axm0432_jtag_init
, axm0432_jtag_reset
, NULL
},
165 { "sheevaplug", sheevaplug_init
, sheevaplug_reset
, NULL
},
166 { "icebear", icebear_jtag_init
, icebear_jtag_reset
, NULL
},
167 { "cortino", cortino_jtag_init
, comstick_reset
, NULL
},
168 { NULL
, NULL
, NULL
, NULL
},
171 static u8 nTRST
, nTRSTnOE
, nSRST
, nSRSTnOE
;
173 static const ft2232_layout_t
*layout
;
174 static u8 low_output
= 0x0;
175 static u8 low_direction
= 0x0;
176 static u8 high_output
= 0x0;
177 static u8 high_direction
= 0x0;
179 #if BUILD_FT2232_FTD2XX == 1
180 static FT_HANDLE ftdih
= NULL
;
181 static FT_DEVICE ftdi_device
= 0;
182 #elif BUILD_FT2232_LIBFTDI == 1
183 static struct ftdi_context ftdic
;
187 static jtag_command_t
* first_unsent
; /* next command that has to be sent */
188 static int require_send
;
191 /* http://urjtag.wiki.sourceforge.net/Cable+FT2232 says:
193 "There is a significant difference between libftdi and libftd2xx. The latter
194 one allows to schedule up to 64*64 bytes of result data while libftdi fails
195 with more than 4*64. As a consequence, the FT2232 driver is forced to
196 perform around 16x more USB transactions for long command streams with TDO
197 capture when running with libftdi."
200 #define FT2232_BUFFER_SIZE 131072
201 a comment would have been nice.
204 #define FT2232_BUFFER_SIZE 131072
206 static u8
* ft2232_buffer
= NULL
;
207 static int ft2232_buffer_size
= 0;
208 static int ft2232_read_pointer
= 0;
209 static int ft2232_expect_read
= 0;
212 * Function buffer_write
213 * writes a byte into the byte buffer, "ft2232_buffer", which must be sent later.
214 * @param val is the byte to send.
216 static inline void buffer_write( u8 val
)
218 assert( ft2232_buffer
);
219 assert( (unsigned) ft2232_buffer_size
< (unsigned) FT2232_BUFFER_SIZE
);
220 ft2232_buffer
[ft2232_buffer_size
++] = val
;
224 * Function buffer_read
225 * returns a byte from the byte buffer.
227 static inline u8
buffer_read(void)
229 assert( ft2232_buffer
);
230 assert( ft2232_read_pointer
< ft2232_buffer_size
);
231 return ft2232_buffer
[ft2232_read_pointer
++];
236 * Clocks out \a bit_count bits on the TMS line, starting with the least
237 * significant bit of tms_bits and progressing to more significant bits.
238 * Rigorous state transition logging is done here via tap_set_state().
240 * @param mpsse_cmd One of the MPSSE TMS oriented commands such as
241 * 0x4b or 0x6b. See the MPSSE spec referenced above for their
242 * functionality. The MPSSE command "Clock Data to TMS/CS Pin (no Read)"
243 * is often used for this, 0x4b.
245 * @param tms_bits Holds the sequence of bits to send.
246 * @param tms_count Tells how many bits in the sequence.
247 * @param tdi_bit A single bit to pass on to TDI before the first TCK
248 * cycle and held static for the duration of TMS clocking.
250 * See the MPSSE spec referenced above.
252 static void clock_tms( u8 mpsse_cmd
, int tms_bits
, int tms_count
, bool tdi_bit
)
256 int tms_ndx
; /* bit index into tms_byte */
258 assert( tms_count
> 0 );
260 // LOG_DEBUG("mpsse cmd=%02x, tms_bits=0x%08x, bit_count=%d", mpsse_cmd, tms_bits, tms_count );
262 for (tms_byte
= tms_ndx
= i
= 0; i
< tms_count
; ++i
, tms_bits
>>=1)
264 bool bit
= tms_bits
& 1;
267 tms_byte
|= (1<<tms_ndx
);
269 /* always do state transitions in public view */
270 tap_set_state( tap_state_transition(tap_get_state(), bit
) );
272 /* we wrote a bit to tms_byte just above, increment bit index. if bit was zero
277 if( tms_ndx
==7 || i
==tms_count
-1 )
279 buffer_write( mpsse_cmd
);
280 buffer_write( tms_ndx
- 1 );
282 /* Bit 7 of the byte is passed on to TDI/DO before the first TCK/SK of
283 TMS/CS and is held static for the duration of TMS/CS clocking.
285 buffer_write( tms_byte
| (tdi_bit
<< 7) );
292 * Function get_tms_buffer_requirements
293 * returns what clock_tms() will consume if called with
296 static inline int get_tms_buffer_requirements( int bit_count
)
298 return ((bit_count
+ 6)/7) * 3;
303 * Function move_to_state
304 * moves the TAP controller from the current state to a
305 * \a goal_state through a path given by tap_get_tms_path(). State transition
306 * logging is performed by delegation to clock_tms().
308 * @param goal_state is the destination state for the move.
310 static void move_to_state( tap_state_t goal_state
)
312 tap_state_t start_state
= tap_get_state();
314 /* goal_state is 1/2 of a tuple/pair of states which allow convenient
315 lookup of the required TMS pattern to move to this state from the
319 /* do the 2 lookups */
320 int tms_bits
= tap_get_tms_path(start_state
, goal_state
);
321 int tms_count
= tap_get_tms_path_len(start_state
, goal_state
);
323 DEBUG_JTAG_IO( "start=%s goal=%s", tap_state_name(start_state
), tap_state_name(goal_state
) );
325 clock_tms( 0x4b, tms_bits
, tms_count
, 0 );
329 jtag_interface_t ft2232_interface
=
332 .execute_queue
= ft2232_execute_queue
,
333 .speed
= ft2232_speed
,
334 .speed_div
= ft2232_speed_div
,
336 .register_commands
= ft2232_register_commands
,
341 static int ft2232_write(u8
* buf
, int size
, u32
* bytes_written
)
343 #if BUILD_FT2232_FTD2XX == 1
345 DWORD dw_bytes_written
;
346 if ( ( status
= FT_Write(ftdih
, buf
, size
, &dw_bytes_written
) ) != FT_OK
)
348 *bytes_written
= dw_bytes_written
;
349 LOG_ERROR("FT_Write returned: %lu", status
);
350 return ERROR_JTAG_DEVICE_ERROR
;
354 *bytes_written
= dw_bytes_written
;
357 #elif BUILD_FT2232_LIBFTDI == 1
359 if ( ( retval
= ftdi_write_data(&ftdic
, buf
, size
) ) < 0 )
362 LOG_ERROR( "ftdi_write_data: %s", ftdi_get_error_string(&ftdic
) );
363 return ERROR_JTAG_DEVICE_ERROR
;
367 *bytes_written
= retval
;
374 static int ft2232_read(u8
* buf
, u32 size
, u32
* bytes_read
)
376 #if BUILD_FT2232_FTD2XX == 1
382 while ( (*bytes_read
< size
) && timeout
-- )
384 if ( ( status
= FT_Read(ftdih
, buf
+ *bytes_read
, size
-
385 *bytes_read
, &dw_bytes_read
) ) != FT_OK
)
388 LOG_ERROR("FT_Read returned: %lu", status
);
389 return ERROR_JTAG_DEVICE_ERROR
;
391 *bytes_read
+= dw_bytes_read
;
394 #elif BUILD_FT2232_LIBFTDI == 1
399 while ( (*bytes_read
< size
) && timeout
-- )
401 if ( ( retval
= ftdi_read_data(&ftdic
, buf
+ *bytes_read
, size
- *bytes_read
) ) < 0 )
404 LOG_ERROR( "ftdi_read_data: %s", ftdi_get_error_string(&ftdic
) );
405 return ERROR_JTAG_DEVICE_ERROR
;
407 *bytes_read
+= retval
;
412 if (*bytes_read
< size
)
414 LOG_ERROR("couldn't read the requested number of bytes from FT2232 device (%i < %i)", *bytes_read
, size
);
415 return ERROR_JTAG_DEVICE_ERROR
;
421 #ifdef BUILD_FTD2XX_HIGHSPEED
422 static bool ft2232_device_is_highspeed(void)
424 return (ftdi_device
== FT_DEVICE_2232H
) || (ftdi_device
== FT_DEVICE_4232H
);
427 static int ft2232_adaptive_clocking(int speed
)
429 bool use_adaptive_clocking
= FALSE
;
432 if (ft2232_device_is_highspeed())
433 use_adaptive_clocking
= TRUE
;
436 LOG_ERROR("ft2232 device %lu does not support RTCK", ftdi_device
);
441 u8 buf
= use_adaptive_clocking
? 0x96 : 0x97;
442 LOG_DEBUG("%2.2x", buf
);
445 int retval
= ft2232_write(&buf
, 1, &bytes_written
);
446 if (ERROR_OK
!= retval
|| bytes_written
!= 1)
448 LOG_ERROR("unable to set adative clocking: %d", retval
);
455 static int ft2232_adaptive_clocking(int speed
)
457 // not implemented on low-speed devices
458 return speed
? ERROR_OK
: -1234;
462 static int ft2232_speed(int speed
)
468 ft2232_adaptive_clocking(speed
);
470 buf
[0] = 0x86; /* command "set divisor" */
471 buf
[1] = speed
& 0xff; /* valueL (0=6MHz, 1=3MHz, 2=2.0MHz, ...*/
472 buf
[2] = (speed
>> 8) & 0xff; /* valueH */
474 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
475 if ( ( ( retval
= ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
477 LOG_ERROR("couldn't set FT2232 TCK speed");
485 static int ft2232_speed_div(int speed
, int* khz
)
487 /* Take a look in the FT2232 manual,
488 * AN2232C-01 Command Processor for
489 * MPSSE and MCU Host Bus. Chapter 3.8 */
491 *khz
= ft2232_max_tck
/ (1 + speed
);
497 static int ft2232_khz(int khz
, int* jtag_speed
)
501 #ifdef BUILD_FTD2XX_HIGHSPEED
505 LOG_DEBUG("RCLK not supported");
506 LOG_DEBUG("If you have a high-speed FTDI device, then "
507 "OpenOCD may be built with --enable-ftd2xx-highspeed.");
512 /* Take a look in the FT2232 manual,
513 * AN2232C-01 Command Processor for
514 * MPSSE and MCU Host Bus. Chapter 3.8
516 * We will calc here with a multiplier
517 * of 10 for better rounding later. */
519 /* Calc speed, (ft2232_max_tck / khz) - 1 */
520 /* Use 65000 for better rounding */
521 *jtag_speed
= ((ft2232_max_tck
*10) / khz
) - 10;
523 /* Add 0.9 for rounding */
526 /* Calc real speed */
527 *jtag_speed
= *jtag_speed
/ 10;
529 /* Check if speed is greater than 0 */
535 /* Check max value */
536 if (*jtag_speed
> 0xFFFF)
538 *jtag_speed
= 0xFFFF;
545 static int ft2232_register_commands(struct command_context_s
* cmd_ctx
)
547 register_command(cmd_ctx
, NULL
, "ft2232_device_desc", ft2232_handle_device_desc_command
,
548 COMMAND_CONFIG
, "the USB device description of the FTDI FT2232 device");
549 register_command(cmd_ctx
, NULL
, "ft2232_serial", ft2232_handle_serial_command
,
550 COMMAND_CONFIG
, "the serial number of the FTDI FT2232 device");
551 register_command(cmd_ctx
, NULL
, "ft2232_layout", ft2232_handle_layout_command
,
552 COMMAND_CONFIG
, "the layout of the FT2232 GPIO signals used to control output-enables and reset signals");
553 register_command(cmd_ctx
, NULL
, "ft2232_vid_pid", ft2232_handle_vid_pid_command
,
554 COMMAND_CONFIG
, "the vendor ID and product ID of the FTDI FT2232 device");
555 register_command(cmd_ctx
, NULL
, "ft2232_latency", ft2232_handle_latency_command
,
556 COMMAND_CONFIG
, "set the FT2232 latency timer to a new value");
561 static void ft2232_end_state(tap_state_t state
)
563 if (tap_is_state_stable(state
))
564 tap_set_end_state(state
);
567 LOG_ERROR("BUG: %s is not a stable end state", tap_state_name(state
));
572 static void ft2232_read_scan(enum scan_type type
, u8
* buffer
, int scan_size
)
574 int num_bytes
= (scan_size
+ 7) / 8;
575 int bits_left
= scan_size
;
578 while (num_bytes
-- > 1)
580 buffer
[cur_byte
++] = buffer_read();
584 buffer
[cur_byte
] = 0x0;
586 /* There is one more partial byte left from the clock data in/out instructions */
589 buffer
[cur_byte
] = buffer_read() >> 1;
591 /* This shift depends on the length of the clock data to tms instruction, insterted at end of the scan, now fixed to a two step transition in ft2232_add_scan */
592 buffer
[cur_byte
] = ( buffer
[cur_byte
] | ( ( (buffer_read()) << 1 ) & 0x80 )) >> (8 - bits_left
);
596 static void ft2232_debug_dump_buffer(void)
602 for (i
= 0; i
< ft2232_buffer_size
; i
++)
604 line_p
+= snprintf(line_p
, 256 - (line_p
- line
), "%2.2x ", ft2232_buffer
[i
]);
607 LOG_DEBUG("%s", line
);
613 LOG_DEBUG("%s", line
);
617 static int ft2232_send_and_recv(jtag_command_t
* first
, jtag_command_t
* last
)
627 #ifdef _DEBUG_USB_IO_
628 struct timeval start
, inter
, inter2
, end
;
629 struct timeval d_inter
, d_inter2
, d_end
;
632 #ifdef _DEBUG_USB_COMMS_
633 LOG_DEBUG("write buffer (size %i):", ft2232_buffer_size
);
634 ft2232_debug_dump_buffer();
637 #ifdef _DEBUG_USB_IO_
638 gettimeofday(&start
, NULL
);
641 if ( ( retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
) ) != ERROR_OK
)
643 LOG_ERROR("couldn't write MPSSE commands to FT2232");
647 #ifdef _DEBUG_USB_IO_
648 gettimeofday(&inter
, NULL
);
651 if (ft2232_expect_read
)
654 ft2232_buffer_size
= 0;
656 #ifdef _DEBUG_USB_IO_
657 gettimeofday(&inter2
, NULL
);
660 if ( ( retval
= ft2232_read(ft2232_buffer
, ft2232_expect_read
, &bytes_read
) ) != ERROR_OK
)
662 LOG_ERROR("couldn't read from FT2232");
666 #ifdef _DEBUG_USB_IO_
667 gettimeofday(&end
, NULL
);
669 timeval_subtract(&d_inter
, &inter
, &start
);
670 timeval_subtract(&d_inter2
, &inter2
, &start
);
671 timeval_subtract(&d_end
, &end
, &start
);
673 LOG_INFO("inter: %u.%06u, inter2: %u.%06u end: %u.%06u",
674 (unsigned)d_inter
.tv_sec
, (unsigned)d_inter
.tv_usec
,
675 (unsigned)d_inter2
.tv_sec
, (unsigned)d_inter2
.tv_usec
,
676 (unsigned)d_end
.tv_sec
, (unsigned)d_end
.tv_usec
);
679 ft2232_buffer_size
= bytes_read
;
681 if (ft2232_expect_read
!= ft2232_buffer_size
)
683 LOG_ERROR("ft2232_expect_read (%i) != ft2232_buffer_size (%i) (%i retries)", ft2232_expect_read
,
686 ft2232_debug_dump_buffer();
691 #ifdef _DEBUG_USB_COMMS_
692 LOG_DEBUG("read buffer (%i retries): %i bytes", 100 - timeout
, ft2232_buffer_size
);
693 ft2232_debug_dump_buffer();
697 ft2232_expect_read
= 0;
698 ft2232_read_pointer
= 0;
700 /* return ERROR_OK, unless a jtag_read_buffer returns a failed check
701 * that wasn't handled by a caller-provided error handler
711 type
= jtag_scan_type(cmd
->cmd
.scan
);
712 if (type
!= SCAN_OUT
)
714 scan_size
= jtag_scan_size(cmd
->cmd
.scan
);
715 buffer
= calloc(CEIL(scan_size
, 8), 1);
716 ft2232_read_scan(type
, buffer
, scan_size
);
717 if (jtag_read_buffer(buffer
, cmd
->cmd
.scan
) != ERROR_OK
)
718 retval
= ERROR_JTAG_QUEUE_FAILED
;
730 ft2232_buffer_size
= 0;
737 * Function ft2232_add_pathmove
738 * moves the TAP controller from the current state to a new state through the
739 * given path, where path is an array of tap_state_t's.
741 * @param path is an array of tap_stat_t which gives the states to traverse through
742 * ending with the last state at path[num_states-1]
743 * @param num_states is the count of state steps to move through
745 static void ft2232_add_pathmove( tap_state_t
* path
, int num_states
)
749 tap_state_t walker
= tap_get_state();
751 assert( (unsigned) num_states
<= 32u ); /* tms_bits only holds 32 bits */
753 /* this loop verifies that the path is legal and logs each state in the path */
754 for( state_ndx
= 0; state_ndx
< num_states
; ++state_ndx
)
756 tap_state_t desired_next_state
= path
[state_ndx
];
758 if (tap_state_transition(walker
, false) == desired_next_state
)
759 ; /* bit within tms_bits at index state_ndx is already zero */
760 else if (tap_state_transition(walker
, true) == desired_next_state
)
761 tms_bits
|= (1<<state_ndx
);
764 LOG_ERROR( "BUG: %s -> %s isn't a valid TAP transition",
765 tap_state_name(walker
), tap_state_name(desired_next_state
) );
769 walker
= desired_next_state
;
772 clock_tms( 0x4b, tms_bits
, num_states
, 0 );
774 tap_set_end_state(tap_get_state());
778 static void ft2232_add_scan(bool ir_scan
, enum scan_type type
, u8
* buffer
, int scan_size
)
780 int num_bytes
= (scan_size
+ 7) / 8;
781 int bits_left
= scan_size
;
787 if (tap_get_state() != TAP_DRSHIFT
)
789 move_to_state( TAP_DRSHIFT
);
794 if (tap_get_state() != TAP_IRSHIFT
)
796 move_to_state( TAP_IRSHIFT
);
800 /* add command for complete bytes */
801 while (num_bytes
> 1)
806 /* Clock Data Bytes In and Out LSB First */
807 buffer_write( 0x39 );
808 /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
810 else if (type
== SCAN_OUT
)
812 /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
813 buffer_write( 0x19 );
814 /* LOG_DEBUG("added TDI bytes (o)"); */
816 else if (type
== SCAN_IN
)
818 /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
819 buffer_write( 0x28 );
820 /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
823 thisrun_bytes
= (num_bytes
> 65537) ? 65536 : (num_bytes
- 1);
824 num_bytes
-= thisrun_bytes
;
826 buffer_write( (u8
) (thisrun_bytes
- 1) );
827 buffer_write( (u8
) ((thisrun_bytes
- 1) >> 8) );
831 /* add complete bytes */
832 while (thisrun_bytes
-- > 0)
834 buffer_write( buffer
[cur_byte
++] );
838 else /* (type == SCAN_IN) */
840 bits_left
-= 8 * (thisrun_bytes
);
844 /* the most signifcant bit is scanned during TAP movement */
846 last_bit
= ( buffer
[cur_byte
] >> (bits_left
- 1) ) & 0x1;
850 /* process remaining bits but the last one */
855 /* Clock Data Bits In and Out LSB First */
856 buffer_write( 0x3b );
857 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
859 else if (type
== SCAN_OUT
)
861 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
862 buffer_write( 0x1b );
863 /* LOG_DEBUG("added TDI bits (o)"); */
865 else if (type
== SCAN_IN
)
867 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
868 buffer_write( 0x2a );
869 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
872 buffer_write( bits_left
- 2 );
874 buffer_write( buffer
[cur_byte
] );
877 if ( ( ir_scan
&& (tap_get_end_state() == TAP_IRSHIFT
) )
878 || ( !ir_scan
&& (tap_get_end_state() == TAP_DRSHIFT
) ) )
882 /* Clock Data Bits In and Out LSB First */
883 buffer_write( 0x3b );
884 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
886 else if (type
== SCAN_OUT
)
888 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
889 buffer_write( 0x1b );
890 /* LOG_DEBUG("added TDI bits (o)"); */
892 else if (type
== SCAN_IN
)
894 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
895 buffer_write( 0x2a );
896 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
899 buffer_write( last_bit
);
907 /* move from Shift-IR/DR to end state */
908 if (type
!= SCAN_OUT
)
910 /* We always go to the PAUSE state in two step at the end of an IN or IO scan */
911 /* This must be coordinated with the bit shifts in ft2232_read_scan */
914 /* Clock Data to TMS/CS Pin with Read */
916 /* LOG_DEBUG("added TMS scan (read)"); */
920 tms_bits
= tap_get_tms_path( tap_get_state(), tap_get_end_state() );
921 tms_count
= tap_get_tms_path_len( tap_get_state(), tap_get_end_state() );
922 /* Clock Data to TMS/CS Pin (no Read) */
924 /* LOG_DEBUG("added TMS scan (no read)"); */
927 clock_tms( mpsse_cmd
, tms_bits
, tms_count
, last_bit
);
930 if (tap_get_state() != tap_get_end_state())
932 move_to_state( tap_get_end_state() );
937 static int ft2232_large_scan(scan_command_t
* cmd
, enum scan_type type
, u8
* buffer
, int scan_size
)
939 int num_bytes
= (scan_size
+ 7) / 8;
940 int bits_left
= scan_size
;
943 u8
* receive_buffer
= malloc( CEIL(scan_size
, 8) );
944 u8
* receive_pointer
= receive_buffer
;
948 int thisrun_read
= 0;
952 LOG_ERROR("BUG: large IR scans are not supported");
956 if (tap_get_state() != TAP_DRSHIFT
)
958 move_to_state( TAP_DRSHIFT
);
961 if ( ( retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
) ) != ERROR_OK
)
963 LOG_ERROR("couldn't write MPSSE commands to FT2232");
966 LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i", ft2232_buffer_size
, bytes_written
);
967 ft2232_buffer_size
= 0;
969 /* add command for complete bytes */
970 while (num_bytes
> 1)
976 /* Clock Data Bytes In and Out LSB First */
977 buffer_write( 0x39 );
978 /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
980 else if (type
== SCAN_OUT
)
982 /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
983 buffer_write( 0x19 );
984 /* LOG_DEBUG("added TDI bytes (o)"); */
986 else if (type
== SCAN_IN
)
988 /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
989 buffer_write( 0x28 );
990 /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
993 thisrun_bytes
= (num_bytes
> 65537) ? 65536 : (num_bytes
- 1);
994 thisrun_read
= thisrun_bytes
;
995 num_bytes
-= thisrun_bytes
;
996 buffer_write( (u8
) (thisrun_bytes
- 1) );
997 buffer_write( (u8
) ( (thisrun_bytes
- 1) >> 8 ));
1001 /* add complete bytes */
1002 while (thisrun_bytes
-- > 0)
1004 buffer_write( buffer
[cur_byte
] );
1009 else /* (type == SCAN_IN) */
1011 bits_left
-= 8 * (thisrun_bytes
);
1014 if ( ( retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
) ) != ERROR_OK
)
1016 LOG_ERROR("couldn't write MPSSE commands to FT2232");
1019 LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i", ft2232_buffer_size
, bytes_written
);
1020 ft2232_buffer_size
= 0;
1022 if (type
!= SCAN_OUT
)
1024 if ( ( retval
= ft2232_read(receive_pointer
, thisrun_read
, &bytes_read
) ) != ERROR_OK
)
1026 LOG_ERROR("couldn't read from FT2232");
1029 LOG_DEBUG("thisrun_read: %i, bytes_read: %i", thisrun_read
, bytes_read
);
1030 receive_pointer
+= bytes_read
;
1036 /* the most signifcant bit is scanned during TAP movement */
1037 if (type
!= SCAN_IN
)
1038 last_bit
= ( buffer
[cur_byte
] >> (bits_left
- 1) ) & 0x1;
1042 /* process remaining bits but the last one */
1045 if (type
== SCAN_IO
)
1047 /* Clock Data Bits In and Out LSB First */
1048 buffer_write( 0x3b );
1049 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
1051 else if (type
== SCAN_OUT
)
1053 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
1054 buffer_write( 0x1b );
1055 /* LOG_DEBUG("added TDI bits (o)"); */
1057 else if (type
== SCAN_IN
)
1059 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
1060 buffer_write( 0x2a );
1061 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
1063 buffer_write( bits_left
- 2 );
1064 if (type
!= SCAN_IN
)
1065 buffer_write( buffer
[cur_byte
] );
1067 if (type
!= SCAN_OUT
)
1071 if (tap_get_end_state() == TAP_DRSHIFT
)
1073 if (type
== SCAN_IO
)
1075 /* Clock Data Bits In and Out LSB First */
1076 buffer_write( 0x3b );
1077 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
1079 else if (type
== SCAN_OUT
)
1081 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
1082 buffer_write( 0x1b );
1083 /* LOG_DEBUG("added TDI bits (o)"); */
1085 else if (type
== SCAN_IN
)
1087 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
1088 buffer_write( 0x2a );
1089 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
1091 buffer_write( 0x0 );
1092 buffer_write( last_bit
);
1096 int tms_bits
= tap_get_tms_path( tap_get_state(), tap_get_end_state() );
1097 int tms_count
= tap_get_tms_path_len( tap_get_state(), tap_get_end_state() );
1100 /* move from Shift-IR/DR to end state */
1101 if (type
!= SCAN_OUT
)
1103 /* Clock Data to TMS/CS Pin with Read */
1105 /* LOG_DEBUG("added TMS scan (read)"); */
1109 /* Clock Data to TMS/CS Pin (no Read) */
1111 /* LOG_DEBUG("added TMS scan (no read)"); */
1114 clock_tms( mpsse_cmd
, tms_bits
, tms_count
, last_bit
);
1117 if (type
!= SCAN_OUT
)
1120 if ( ( retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
) ) != ERROR_OK
)
1122 LOG_ERROR("couldn't write MPSSE commands to FT2232");
1125 LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i", ft2232_buffer_size
, bytes_written
);
1126 ft2232_buffer_size
= 0;
1128 if (type
!= SCAN_OUT
)
1130 if ( ( retval
= ft2232_read(receive_pointer
, thisrun_read
, &bytes_read
) ) != ERROR_OK
)
1132 LOG_ERROR("couldn't read from FT2232");
1135 LOG_DEBUG("thisrun_read: %i, bytes_read: %i", thisrun_read
, bytes_read
);
1136 receive_pointer
+= bytes_read
;
1143 static int ft2232_predict_scan_out(int scan_size
, enum scan_type type
)
1145 int predicted_size
= 3;
1146 int num_bytes
= (scan_size
- 1) / 8;
1148 if (tap_get_state() != TAP_DRSHIFT
)
1149 predicted_size
+= get_tms_buffer_requirements( tap_get_tms_path_len( tap_get_state(), TAP_DRSHIFT
) );
1151 if (type
== SCAN_IN
) /* only from device to host */
1153 /* complete bytes */
1154 predicted_size
+= CEIL(num_bytes
, 65536) * 3;
1156 /* remaining bits - 1 (up to 7) */
1157 predicted_size
+= ( (scan_size
- 1) % 8 ) ? 2 : 0;
1159 else /* host to device, or bidirectional */
1161 /* complete bytes */
1162 predicted_size
+= num_bytes
+ CEIL(num_bytes
, 65536) * 3;
1164 /* remaining bits -1 (up to 7) */
1165 predicted_size
+= ( (scan_size
- 1) % 8 ) ? 3 : 0;
1168 return predicted_size
;
1172 static int ft2232_predict_scan_in(int scan_size
, enum scan_type type
)
1174 int predicted_size
= 0;
1176 if (type
!= SCAN_OUT
)
1178 /* complete bytes */
1179 predicted_size
+= (CEIL(scan_size
, 8) > 1) ? (CEIL(scan_size
, 8) - 1) : 0;
1181 /* remaining bits - 1 */
1182 predicted_size
+= ( (scan_size
- 1) % 8 ) ? 1 : 0;
1184 /* last bit (from TMS scan) */
1185 predicted_size
+= 1;
1188 /* LOG_DEBUG("scan_size: %i, predicted_size: %i", scan_size, predicted_size); */
1190 return predicted_size
;
1194 static void usbjtag_reset(int trst
, int srst
)
1198 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1199 low_direction
|= nTRSTnOE
; /* switch to output pin (output is low) */
1201 low_output
&= ~nTRST
; /* switch output low */
1205 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1206 low_direction
&= ~nTRSTnOE
; /* switch to input pin (high-Z + internal and external pullup) */
1208 low_output
|= nTRST
; /* switch output high */
1213 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1214 low_output
&= ~nSRST
; /* switch output low */
1216 low_direction
|= nSRSTnOE
; /* switch to output pin (output is low) */
1220 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1221 low_output
|= nSRST
; /* switch output high */
1223 low_direction
&= ~nSRSTnOE
; /* switch to input pin (high-Z) */
1226 /* command "set data bits low byte" */
1227 buffer_write( 0x80 );
1228 buffer_write( low_output
);
1229 buffer_write( low_direction
);
1233 static void jtagkey_reset(int trst
, int srst
)
1237 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1238 high_output
&= ~nTRSTnOE
;
1240 high_output
&= ~nTRST
;
1244 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1245 high_output
|= nTRSTnOE
;
1247 high_output
|= nTRST
;
1252 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1253 high_output
&= ~nSRST
;
1255 high_output
&= ~nSRSTnOE
;
1259 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1260 high_output
|= nSRST
;
1262 high_output
|= nSRSTnOE
;
1265 /* command "set data bits high byte" */
1266 buffer_write( 0x82 );
1267 buffer_write( high_output
);
1268 buffer_write( high_direction
);
1269 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
,
1274 static void olimex_jtag_reset(int trst
, int srst
)
1278 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1279 high_output
&= ~nTRSTnOE
;
1281 high_output
&= ~nTRST
;
1285 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1286 high_output
|= nTRSTnOE
;
1288 high_output
|= nTRST
;
1293 high_output
|= nSRST
;
1297 high_output
&= ~nSRST
;
1300 /* command "set data bits high byte" */
1301 buffer_write( 0x82 );
1302 buffer_write( high_output
);
1303 buffer_write( high_direction
);
1304 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
,
1309 static void axm0432_jtag_reset(int trst
, int srst
)
1313 tap_set_state(TAP_RESET
);
1314 high_output
&= ~nTRST
;
1318 high_output
|= nTRST
;
1323 high_output
&= ~nSRST
;
1327 high_output
|= nSRST
;
1330 /* command "set data bits low byte" */
1331 buffer_write( 0x82 );
1332 buffer_write( high_output
);
1333 buffer_write( high_direction
);
1334 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
,
1339 static void flyswatter_reset(int trst
, int srst
)
1343 low_output
&= ~nTRST
;
1347 low_output
|= nTRST
;
1352 low_output
|= nSRST
;
1356 low_output
&= ~nSRST
;
1359 /* command "set data bits low byte" */
1360 buffer_write( 0x80 );
1361 buffer_write( low_output
);
1362 buffer_write( low_direction
);
1363 LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst
, srst
, low_output
, low_direction
);
1367 static void turtle_reset(int trst
, int srst
)
1373 low_output
|= nSRST
;
1377 low_output
&= ~nSRST
;
1380 /* command "set data bits low byte" */
1381 buffer_write( 0x80 );
1382 buffer_write( low_output
);
1383 buffer_write( low_direction
);
1384 LOG_DEBUG("srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", srst
, low_output
, low_direction
);
1388 static void comstick_reset(int trst
, int srst
)
1392 high_output
&= ~nTRST
;
1396 high_output
|= nTRST
;
1401 high_output
&= ~nSRST
;
1405 high_output
|= nSRST
;
1408 /* command "set data bits high byte" */
1409 buffer_write( 0x82 );
1410 buffer_write( high_output
);
1411 buffer_write( high_direction
);
1412 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
,
1417 static void stm32stick_reset(int trst
, int srst
)
1421 high_output
&= ~nTRST
;
1425 high_output
|= nTRST
;
1430 low_output
&= ~nSRST
;
1434 low_output
|= nSRST
;
1437 /* command "set data bits low byte" */
1438 buffer_write( 0x80 );
1439 buffer_write( low_output
);
1440 buffer_write( low_direction
);
1442 /* command "set data bits high byte" */
1443 buffer_write( 0x82 );
1444 buffer_write( high_output
);
1445 buffer_write( high_direction
);
1446 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
,
1452 static void sheevaplug_reset(int trst
, int srst
)
1455 high_output
&= ~nTRST
;
1457 high_output
|= nTRST
;
1460 high_output
&= ~nSRSTnOE
;
1462 high_output
|= nSRSTnOE
;
1464 /* command "set data bits high byte" */
1465 buffer_write( 0x82 );
1466 buffer_write( high_output
);
1467 buffer_write( high_direction
);
1468 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
, high_direction
);
1471 static int ft2232_execute_runtest(jtag_command_t
*cmd
)
1475 int predicted_size
= 0;
1478 DEBUG_JTAG_IO("runtest %i cycles, end in %s",
1479 cmd
->cmd
.runtest
->num_cycles
,
1480 tap_state_name(cmd
->cmd
.runtest
->end_state
));
1482 /* only send the maximum buffer size that FT2232C can handle */
1484 if (tap_get_state() != TAP_IDLE
)
1485 predicted_size
+= 3;
1486 predicted_size
+= 3 * CEIL(cmd
->cmd
.runtest
->num_cycles
, 7);
1487 if ( cmd
->cmd
.runtest
->end_state
!= TAP_IDLE
)
1488 predicted_size
+= 3;
1489 if ( tap_get_end_state() != TAP_IDLE
)
1490 predicted_size
+= 3;
1491 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
)
1493 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1494 retval
= ERROR_JTAG_QUEUE_FAILED
;
1498 if (tap_get_state() != TAP_IDLE
)
1500 move_to_state( TAP_IDLE
);
1503 i
= cmd
->cmd
.runtest
->num_cycles
;
1506 /* there are no state transitions in this code, so omit state tracking */
1508 /* command "Clock Data to TMS/CS Pin (no Read)" */
1509 buffer_write( 0x4b );
1512 buffer_write( (i
> 7) ? 6 : (i
- 1) );
1515 buffer_write( 0x0 );
1516 tap_set_state(TAP_IDLE
);
1518 i
-= (i
> 7) ? 7 : i
;
1519 /* LOG_DEBUG("added TMS scan (no read)"); */
1522 ft2232_end_state(cmd
->cmd
.runtest
->end_state
);
1524 if ( tap_get_state() != tap_get_end_state() )
1526 move_to_state( tap_get_end_state() );
1530 #ifdef _DEBUG_JTAG_IO_
1531 LOG_DEBUG( "runtest: %i, end in %s", cmd
->cmd
.runtest
->num_cycles
, tap_state_name( tap_get_end_state() ) );
1538 static int ft2232_execute_statemove(jtag_command_t
*cmd
)
1540 int predicted_size
= 0;
1541 int retval
= ERROR_OK
;
1543 DEBUG_JTAG_IO("statemove end in %i", cmd
->cmd
.statemove
->end_state
);
1545 /* only send the maximum buffer size that FT2232C can handle */
1547 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
)
1549 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1550 retval
= ERROR_JTAG_QUEUE_FAILED
;
1554 ft2232_end_state(cmd
->cmd
.statemove
->end_state
);
1556 /* move to end state */
1557 if ( tap_get_state() != tap_get_end_state() )
1559 move_to_state( tap_get_end_state() );
1566 static int ft2232_execute_pathmove(jtag_command_t
*cmd
)
1568 int predicted_size
= 0;
1569 int retval
= ERROR_OK
;
1571 tap_state_t
* path
= cmd
->cmd
.pathmove
->path
;
1572 int num_states
= cmd
->cmd
.pathmove
->num_states
;
1574 DEBUG_JTAG_IO("pathmove: %i states, current: %s end: %s", num_states
,
1575 tap_state_name( tap_get_state() ),
1576 tap_state_name( path
[num_states
-1] )
1579 /* only send the maximum buffer size that FT2232C can handle */
1580 predicted_size
= 3 * CEIL(num_states
, 7);
1581 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
)
1583 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1584 retval
= ERROR_JTAG_QUEUE_FAILED
;
1590 ft2232_add_pathmove( path
, num_states
);
1597 static int ft2232_execute_scan(jtag_command_t
*cmd
)
1600 int scan_size
; /* size of IR or DR scan */
1601 int predicted_size
= 0;
1602 int retval
= ERROR_OK
;
1604 enum scan_type type
= jtag_scan_type(cmd
->cmd
.scan
);
1606 DEBUG_JTAG_IO( "%s type:%d", cmd
->cmd
.scan
->ir_scan
? "IRSCAN" : "DRSCAN", type
);
1608 scan_size
= jtag_build_buffer(cmd
->cmd
.scan
, &buffer
);
1610 predicted_size
= ft2232_predict_scan_out(scan_size
, type
);
1611 if ( (predicted_size
+ 1) > FT2232_BUFFER_SIZE
)
1613 LOG_DEBUG("oversized ft2232 scan (predicted_size > FT2232_BUFFER_SIZE)");
1614 /* unsent commands before this */
1615 if (first_unsent
!= cmd
)
1616 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1617 retval
= ERROR_JTAG_QUEUE_FAILED
;
1619 /* current command */
1620 ft2232_end_state(cmd
->cmd
.scan
->end_state
);
1621 ft2232_large_scan(cmd
->cmd
.scan
, type
, buffer
, scan_size
);
1623 first_unsent
= cmd
->next
;
1628 else if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
)
1630 LOG_DEBUG("ft2232 buffer size reached, sending queued commands (first_unsent: %p, cmd: %p)",
1633 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1634 retval
= ERROR_JTAG_QUEUE_FAILED
;
1638 ft2232_expect_read
+= ft2232_predict_scan_in(scan_size
, type
);
1639 /* LOG_DEBUG("new read size: %i", ft2232_expect_read); */
1640 ft2232_end_state(cmd
->cmd
.scan
->end_state
);
1641 ft2232_add_scan(cmd
->cmd
.scan
->ir_scan
, type
, buffer
, scan_size
);
1645 #ifdef _DEBUG_JTAG_IO_
1646 LOG_DEBUG( "%s scan, %i bits, end in %s", (cmd
->cmd
.scan
->ir_scan
) ? "IR" : "DR", scan_size
,
1647 tap_state_name( tap_get_end_state() ) );
1653 static int ft2232_execute_reset(jtag_command_t
*cmd
)
1656 int predicted_size
= 0;
1659 DEBUG_JTAG_IO("reset trst: %i srst %i",
1660 cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
1662 /* only send the maximum buffer size that FT2232C can handle */
1664 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
)
1666 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1667 retval
= ERROR_JTAG_QUEUE_FAILED
;
1672 layout
->reset(cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
1675 #ifdef _DEBUG_JTAG_IO_
1676 LOG_DEBUG("trst: %i, srst: %i", cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
1681 static int ft2232_execute_sleep(jtag_command_t
*cmd
)
1686 DEBUG_JTAG_IO("sleep %i", cmd
->cmd
.sleep
->us
);
1688 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1689 retval
= ERROR_JTAG_QUEUE_FAILED
;
1690 first_unsent
= cmd
->next
;
1691 jtag_sleep(cmd
->cmd
.sleep
->us
);
1692 #ifdef _DEBUG_JTAG_IO_
1693 LOG_DEBUG( "sleep %i usec while in %s", cmd
->cmd
.sleep
->us
, tap_state_name( tap_get_state() ) );
1699 static int ft2232_execute_stableclocks(jtag_command_t
*cmd
)
1704 /* this is only allowed while in a stable state. A check for a stable
1705 * state was done in jtag_add_clocks()
1707 if (ft2232_stableclocks(cmd
->cmd
.stableclocks
->num_cycles
, cmd
) != ERROR_OK
)
1708 retval
= ERROR_JTAG_QUEUE_FAILED
;
1709 #ifdef _DEBUG_JTAG_IO_
1710 LOG_DEBUG( "clocks %i while in %s", cmd
->cmd
.stableclocks
->num_cycles
, tap_state_name( tap_get_state() ) );
1716 static int ft2232_execute_command(jtag_command_t
*cmd
)
1723 case JTAG_RESET
: retval
= ft2232_execute_reset(cmd
); break;
1724 case JTAG_RUNTEST
: retval
= ft2232_execute_runtest(cmd
); break;
1725 case JTAG_STATEMOVE
: retval
= ft2232_execute_statemove(cmd
); break;
1726 case JTAG_PATHMOVE
: retval
= ft2232_execute_pathmove(cmd
); break;
1727 case JTAG_SCAN
: retval
= ft2232_execute_scan(cmd
); break;
1728 case JTAG_SLEEP
: retval
= ft2232_execute_sleep(cmd
); break;
1729 case JTAG_STABLECLOCKS
: retval
= ft2232_execute_stableclocks(cmd
); break;
1731 LOG_ERROR("BUG: unknown JTAG command type encountered");
1737 static int ft2232_execute_queue()
1739 jtag_command_t
* cmd
= jtag_command_queue
; /* currently processed command */
1742 first_unsent
= cmd
; /* next command that has to be sent */
1745 /* return ERROR_OK, unless ft2232_send_and_recv reports a failed check
1746 * that wasn't handled by a caller-provided error handler
1750 ft2232_buffer_size
= 0;
1751 ft2232_expect_read
= 0;
1753 /* blink, if the current layout has that feature */
1759 if (ft2232_execute_command(cmd
) != ERROR_OK
)
1760 retval
= ERROR_JTAG_QUEUE_FAILED
;
1761 /* Start reading input before FT2232 TX buffer fills up */
1763 if (ft2232_expect_read
> 256)
1765 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1766 retval
= ERROR_JTAG_QUEUE_FAILED
;
1771 if (require_send
> 0)
1772 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1773 retval
= ERROR_JTAG_QUEUE_FAILED
;
1779 #if BUILD_FT2232_FTD2XX == 1
1780 static int ft2232_init_ftd2xx(u16 vid
, u16 pid
, int more
, int* try_more
)
1784 char SerialNumber
[16];
1785 char Description
[64];
1786 DWORD openex_flags
= 0;
1787 char* openex_string
= NULL
;
1790 LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)", ft2232_layout
, vid
, pid
);
1793 /* Add non-standard Vid/Pid to the linux driver */
1794 if ( ( status
= FT_SetVIDPID(vid
, pid
) ) != FT_OK
)
1796 LOG_WARNING("couldn't add %4.4x:%4.4x", vid
, pid
);
1800 if (ft2232_device_desc
&& ft2232_serial
)
1802 LOG_WARNING("can't open by device description and serial number, giving precedence to serial");
1803 ft2232_device_desc
= NULL
;
1806 if (ft2232_device_desc
)
1808 openex_string
= ft2232_device_desc
;
1809 openex_flags
= FT_OPEN_BY_DESCRIPTION
;
1811 else if (ft2232_serial
)
1813 openex_string
= ft2232_serial
;
1814 openex_flags
= FT_OPEN_BY_SERIAL_NUMBER
;
1818 LOG_ERROR("neither device description nor serial number specified");
1819 LOG_ERROR("please add \"ft2232_device_desc <string>\" or \"ft2232_serial <string>\" to your .cfg file");
1821 return ERROR_JTAG_INIT_FAILED
;
1824 status
= FT_OpenEx(openex_string
, openex_flags
, &ftdih
);
1825 if( status
!= FT_OK
){
1826 // under Win32, the FTD2XX driver appends an "A" to the end
1827 // of the description, if we tried by the desc, then
1828 // try by the alternate "A" description.
1829 if( openex_string
== ft2232_device_desc
){
1830 // Try the alternate method.
1831 openex_string
= ft2232_device_desc_A
;
1832 status
= FT_OpenEx(openex_string
, openex_flags
, &ftdih
);
1833 if( status
== FT_OK
){
1834 // yea, the "alternate" method worked!
1836 // drat, give the user a meaningfull message.
1837 // telling the use we tried *BOTH* methods.
1838 LOG_WARNING("Unable to open FTDI Device tried: '%s' and '%s'\n",
1840 ft2232_device_desc_A
);
1845 if ( status
!= FT_OK
)
1851 LOG_WARNING("unable to open ftdi device (trying more): %lu", status
);
1853 return ERROR_JTAG_INIT_FAILED
;
1855 LOG_ERROR("unable to open ftdi device: %lu", status
);
1856 status
= FT_ListDevices(&num_devices
, NULL
, FT_LIST_NUMBER_ONLY
);
1857 if (status
== FT_OK
)
1859 char** desc_array
= malloc( sizeof(char*) * (num_devices
+ 1) );
1862 for (i
= 0; i
< num_devices
; i
++)
1863 desc_array
[i
] = malloc(64);
1865 desc_array
[num_devices
] = NULL
;
1867 status
= FT_ListDevices(desc_array
, &num_devices
, FT_LIST_ALL
| openex_flags
);
1869 if (status
== FT_OK
)
1871 LOG_ERROR("ListDevices: %lu\n", num_devices
);
1872 for (i
= 0; i
< num_devices
; i
++)
1873 LOG_ERROR("%i: \"%s\"", i
, desc_array
[i
]);
1876 for (i
= 0; i
< num_devices
; i
++)
1877 free(desc_array
[i
]);
1883 LOG_ERROR("ListDevices: NONE\n");
1885 return ERROR_JTAG_INIT_FAILED
;
1888 if ( ( status
= FT_SetLatencyTimer(ftdih
, ft2232_latency
) ) != FT_OK
)
1890 LOG_ERROR("unable to set latency timer: %lu", status
);
1891 return ERROR_JTAG_INIT_FAILED
;
1894 if ( ( status
= FT_GetLatencyTimer(ftdih
, &latency_timer
) ) != FT_OK
)
1896 LOG_ERROR("unable to get latency timer: %lu", status
);
1897 return ERROR_JTAG_INIT_FAILED
;
1901 LOG_DEBUG("current latency timer: %i", latency_timer
);
1904 if ( ( status
= FT_SetTimeouts(ftdih
, 5000, 5000) ) != FT_OK
)
1906 LOG_ERROR("unable to set timeouts: %lu", status
);
1907 return ERROR_JTAG_INIT_FAILED
;
1910 if ( ( status
= FT_SetBitMode(ftdih
, 0x0b, 2) ) != FT_OK
)
1912 LOG_ERROR("unable to enable bit i/o mode: %lu", status
);
1913 return ERROR_JTAG_INIT_FAILED
;
1916 if ( ( status
= FT_GetDeviceInfo(ftdih
, &ftdi_device
, &deviceID
, SerialNumber
, Description
, NULL
) ) != FT_OK
)
1918 LOG_ERROR("unable to get FT_GetDeviceInfo: %lu", status
);
1919 return ERROR_JTAG_INIT_FAILED
;
1923 LOG_INFO("device: %lu", ftdi_device
);
1924 LOG_INFO("deviceID: %lu", deviceID
);
1925 LOG_INFO("SerialNumber: %s", SerialNumber
);
1926 LOG_INFO("Description: %s", Description
);
1928 #ifdef BUILD_FTD2XX_HIGHSPEED
1929 if (ft2232_device_is_highspeed())
1931 ft2232_max_tck
= FTDI_2232H_4232H_MAX_TCK
;
1932 LOG_INFO("max TCK change to: %u kHz", ft2232_max_tck
);
1941 static int ft2232_purge_ftd2xx(void)
1945 if ( ( status
= FT_Purge(ftdih
, FT_PURGE_RX
| FT_PURGE_TX
) ) != FT_OK
)
1947 LOG_ERROR("error purging ftd2xx device: %lu", status
);
1948 return ERROR_JTAG_INIT_FAILED
;
1955 #endif /* BUILD_FT2232_FTD2XX == 1 */
1957 #if BUILD_FT2232_LIBFTDI == 1
1958 static int ft2232_init_libftdi(u16 vid
, u16 pid
, int more
, int* try_more
)
1962 LOG_DEBUG("'ft2232' interface using libftdi with '%s' layout (%4.4x:%4.4x)",
1963 ft2232_layout
, vid
, pid
);
1965 if (ftdi_init(&ftdic
) < 0)
1966 return ERROR_JTAG_INIT_FAILED
;
1968 if (ftdi_set_interface(&ftdic
, INTERFACE_A
) < 0)
1970 LOG_ERROR("unable to select FT2232 channel A: %s", ftdic
.error_str
);
1971 return ERROR_JTAG_INIT_FAILED
;
1974 /* context, vendor id, product id */
1975 if (ftdi_usb_open_desc(&ftdic
, vid
, pid
, ft2232_device_desc
,
1979 LOG_WARNING("unable to open ftdi device (trying more): %s",
1982 LOG_ERROR("unable to open ftdi device: %s", ftdic
.error_str
);
1984 return ERROR_JTAG_INIT_FAILED
;
1987 /* There is already a reset in ftdi_usb_open_desc, this should be redundant */
1988 if (ftdi_usb_reset(&ftdic
) < 0)
1990 LOG_ERROR("unable to reset ftdi device");
1991 return ERROR_JTAG_INIT_FAILED
;
1994 if (ftdi_set_latency_timer(&ftdic
, ft2232_latency
) < 0)
1996 LOG_ERROR("unable to set latency timer");
1997 return ERROR_JTAG_INIT_FAILED
;
2000 if (ftdi_get_latency_timer(&ftdic
, &latency_timer
) < 0)
2002 LOG_ERROR("unable to get latency timer");
2003 return ERROR_JTAG_INIT_FAILED
;
2007 LOG_DEBUG("current latency timer: %i", latency_timer
);
2010 ftdi_set_bitmode(&ftdic
, 0x0b, 2); /* ctx, JTAG I/O mask */
2016 static int ft2232_purge_libftdi(void)
2018 if (ftdi_usb_purge_buffers(&ftdic
) < 0)
2020 LOG_ERROR("ftdi_purge_buffers: %s", ftdic
.error_str
);
2021 return ERROR_JTAG_INIT_FAILED
;
2028 #endif /* BUILD_FT2232_LIBFTDI == 1 */
2030 static int ft2232_init(void)
2035 const ft2232_layout_t
* cur_layout
= ft2232_layouts
;
2038 if (tap_get_tms_path_len(TAP_IRPAUSE
,TAP_IRPAUSE
)==7)
2040 LOG_DEBUG("ft2232 interface using 7 step jtag state transitions");
2044 LOG_DEBUG("ft2232 interface using shortest path jtag state transitions");
2047 if ( (ft2232_layout
== NULL
) || (ft2232_layout
[0] == 0) )
2049 ft2232_layout
= "usbjtag";
2050 LOG_WARNING("No ft2232 layout specified, using default 'usbjtag'");
2053 while (cur_layout
->name
)
2055 if (strcmp(cur_layout
->name
, ft2232_layout
) == 0)
2057 layout
= cur_layout
;
2065 LOG_ERROR("No matching layout found for %s", ft2232_layout
);
2066 return ERROR_JTAG_INIT_FAILED
;
2072 * "more indicates that there are more IDs to try, so we should
2073 * not print an error for an ID mismatch (but for anything
2076 * try_more indicates that the error code returned indicates an
2077 * ID mismatch (and nothing else) and that we should proceeed
2078 * with the next ID pair.
2080 int more
= ft2232_vid
[i
+ 1] || ft2232_pid
[i
+ 1];
2083 #if BUILD_FT2232_FTD2XX == 1
2084 retval
= ft2232_init_ftd2xx(ft2232_vid
[i
], ft2232_pid
[i
],
2086 #elif BUILD_FT2232_LIBFTDI == 1
2087 retval
= ft2232_init_libftdi(ft2232_vid
[i
], ft2232_pid
[i
],
2092 if (!more
|| !try_more
)
2096 ft2232_buffer_size
= 0;
2097 ft2232_buffer
= malloc(FT2232_BUFFER_SIZE
);
2099 if (layout
->init() != ERROR_OK
)
2100 return ERROR_JTAG_INIT_FAILED
;
2102 ft2232_speed(jtag_speed
);
2104 buf
[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */
2105 if ( ( ( retval
= ft2232_write(buf
, 1, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 1) )
2107 LOG_ERROR("couldn't write to FT2232 to disable loopback");
2108 return ERROR_JTAG_INIT_FAILED
;
2111 #if BUILD_FT2232_FTD2XX == 1
2112 return ft2232_purge_ftd2xx();
2113 #elif BUILD_FT2232_LIBFTDI == 1
2114 return ft2232_purge_libftdi();
2121 static int usbjtag_init(void)
2127 low_direction
= 0x0b;
2129 if (strcmp(ft2232_layout
, "usbjtag") == 0)
2136 else if (strcmp(ft2232_layout
, "signalyzer") == 0)
2143 else if (strcmp(ft2232_layout
, "evb_lm3s811") == 0)
2150 low_direction
= 0x8b;
2154 LOG_ERROR("BUG: usbjtag_init called for unknown layout '%s'", ft2232_layout
);
2155 return ERROR_JTAG_INIT_FAILED
;
2158 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
2160 low_direction
&= ~nTRSTnOE
; /* nTRST input */
2161 low_output
&= ~nTRST
; /* nTRST = 0 */
2165 low_direction
|= nTRSTnOE
; /* nTRST output */
2166 low_output
|= nTRST
; /* nTRST = 1 */
2169 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
2171 low_direction
|= nSRSTnOE
; /* nSRST output */
2172 low_output
|= nSRST
; /* nSRST = 1 */
2176 low_direction
&= ~nSRSTnOE
; /* nSRST input */
2177 low_output
&= ~nSRST
; /* nSRST = 0 */
2180 /* initialize low byte for jtag */
2181 buf
[0] = 0x80; /* command "set data bits low byte" */
2182 buf
[1] = low_output
; /* value (TMS=1,TCK=0, TDI=0, xRST high) */
2183 buf
[2] = low_direction
; /* dir (output=1), TCK/TDI/TMS=out, TDO=in */
2184 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2186 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2188 LOG_ERROR("couldn't initialize FT2232 with 'USBJTAG' layout");
2189 return ERROR_JTAG_INIT_FAILED
;
2196 static int axm0432_jtag_init(void)
2202 low_direction
= 0x2b;
2204 /* initialize low byte for jtag */
2205 buf
[0] = 0x80; /* command "set data bits low byte" */
2206 buf
[1] = low_output
; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
2207 buf
[2] = low_direction
; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
2208 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2210 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2212 LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
2213 return ERROR_JTAG_INIT_FAILED
;
2216 if (strcmp(layout
->name
, "axm0432_jtag") == 0)
2219 nTRSTnOE
= 0x0; /* No output enable for TRST*/
2221 nSRSTnOE
= 0x0; /* No output enable for SRST*/
2225 LOG_ERROR("BUG: axm0432_jtag_init called for non axm0432 layout");
2230 high_direction
= 0x0c;
2232 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
2234 LOG_ERROR("can't set nTRSTOE to push-pull on the Dicarlo jtag");
2238 high_output
|= nTRST
;
2241 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
2243 LOG_ERROR("can't set nSRST to push-pull on the Dicarlo jtag");
2247 high_output
|= nSRST
;
2250 /* initialize high port */
2251 buf
[0] = 0x82; /* command "set data bits high byte" */
2252 buf
[1] = high_output
; /* value */
2253 buf
[2] = high_direction
; /* all outputs (xRST and xRSTnOE) */
2254 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2256 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2258 LOG_ERROR("couldn't initialize FT2232 with 'Dicarlo' layout");
2259 return ERROR_JTAG_INIT_FAILED
;
2266 static int jtagkey_init(void)
2272 low_direction
= 0x1b;
2274 /* initialize low byte for jtag */
2275 buf
[0] = 0x80; /* command "set data bits low byte" */
2276 buf
[1] = low_output
; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
2277 buf
[2] = low_direction
; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
2278 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2280 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2282 LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
2283 return ERROR_JTAG_INIT_FAILED
;
2286 if (strcmp(layout
->name
, "jtagkey") == 0)
2293 else if ( (strcmp(layout
->name
, "jtagkey_prototype_v1") == 0)
2294 || (strcmp(layout
->name
, "oocdlink") == 0) )
2303 LOG_ERROR("BUG: jtagkey_init called for non jtagkey layout");
2308 high_direction
= 0x0f;
2310 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
2312 high_output
|= nTRSTnOE
;
2313 high_output
&= ~nTRST
;
2317 high_output
&= ~nTRSTnOE
;
2318 high_output
|= nTRST
;
2321 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
2323 high_output
&= ~nSRSTnOE
;
2324 high_output
|= nSRST
;
2328 high_output
|= nSRSTnOE
;
2329 high_output
&= ~nSRST
;
2332 /* initialize high port */
2333 buf
[0] = 0x82; /* command "set data bits high byte" */
2334 buf
[1] = high_output
; /* value */
2335 buf
[2] = high_direction
; /* all outputs (xRST and xRSTnOE) */
2336 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2338 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2340 LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
2341 return ERROR_JTAG_INIT_FAILED
;
2348 static int olimex_jtag_init(void)
2354 low_direction
= 0x1b;
2356 /* initialize low byte for jtag */
2357 buf
[0] = 0x80; /* command "set data bits low byte" */
2358 buf
[1] = low_output
; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
2359 buf
[2] = low_direction
; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
2360 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2362 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2364 LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
2365 return ERROR_JTAG_INIT_FAILED
;
2371 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2374 high_direction
= 0x0f;
2376 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
2378 high_output
|= nTRSTnOE
;
2379 high_output
&= ~nTRST
;
2383 high_output
&= ~nTRSTnOE
;
2384 high_output
|= nTRST
;
2387 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
2389 LOG_ERROR("can't set nSRST to push-pull on the Olimex ARM-USB-OCD");
2393 high_output
&= ~nSRST
;
2396 /* turn red LED on */
2397 high_output
|= 0x08;
2399 /* initialize high port */
2400 buf
[0] = 0x82; /* command "set data bits high byte" */
2401 buf
[1] = high_output
; /* value */
2402 buf
[2] = high_direction
; /* all outputs (xRST and xRSTnOE) */
2403 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2405 if ((ft2232_write(buf
, 3, &bytes_written
) != ERROR_OK
) || (bytes_written
!= 3))
2407 LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
2408 return ERROR_JTAG_INIT_FAILED
;
2415 static int flyswatter_init(void)
2421 low_direction
= 0xfb;
2423 /* initialize low byte for jtag */
2424 buf
[0] = 0x80; /* command "set data bits low byte" */
2425 buf
[1] = low_output
; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
2426 buf
[2] = low_direction
; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE[12]=out, n[ST]srst=out */
2427 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2429 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2431 LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
2432 return ERROR_JTAG_INIT_FAILED
;
2436 nTRSTnOE
= 0x0; /* not output enable for nTRST */
2438 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2441 high_direction
= 0x0c;
2443 /* turn red LED3 on, LED2 off */
2444 high_output
|= 0x08;
2446 /* initialize high port */
2447 buf
[0] = 0x82; /* command "set data bits high byte" */
2448 buf
[1] = high_output
; /* value */
2449 buf
[2] = high_direction
; /* all outputs (xRST and xRSTnOE) */
2450 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2452 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2454 LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
2455 return ERROR_JTAG_INIT_FAILED
;
2462 static int turtle_init(void)
2468 low_direction
= 0x5b;
2470 /* initialize low byte for jtag */
2471 buf
[0] = 0x80; /* command "set data bits low byte" */
2472 buf
[1] = low_output
; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
2473 buf
[2] = low_direction
; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
2474 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2476 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2478 LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
2479 return ERROR_JTAG_INIT_FAILED
;
2485 high_direction
= 0x0C;
2487 /* initialize high port */
2488 buf
[0] = 0x82; /* command "set data bits high byte" */
2489 buf
[1] = high_output
;
2490 buf
[2] = high_direction
;
2491 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2493 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2495 LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
2496 return ERROR_JTAG_INIT_FAILED
;
2503 static int comstick_init(void)
2509 low_direction
= 0x0b;
2511 /* initialize low byte for jtag */
2512 buf
[0] = 0x80; /* command "set data bits low byte" */
2513 buf
[1] = low_output
; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
2514 buf
[2] = low_direction
; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
2515 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2517 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2519 LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
2520 return ERROR_JTAG_INIT_FAILED
;
2524 nTRSTnOE
= 0x00; /* no output enable for nTRST */
2526 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2529 high_direction
= 0x03;
2531 /* initialize high port */
2532 buf
[0] = 0x82; /* command "set data bits high byte" */
2533 buf
[1] = high_output
;
2534 buf
[2] = high_direction
;
2535 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2537 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2539 LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
2540 return ERROR_JTAG_INIT_FAILED
;
2547 static int stm32stick_init(void)
2553 low_direction
= 0x8b;
2555 /* initialize low byte for jtag */
2556 buf
[0] = 0x80; /* command "set data bits low byte" */
2557 buf
[1] = low_output
; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
2558 buf
[2] = low_direction
; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
2559 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2561 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2563 LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
2564 return ERROR_JTAG_INIT_FAILED
;
2568 nTRSTnOE
= 0x00; /* no output enable for nTRST */
2570 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2573 high_direction
= 0x03;
2575 /* initialize high port */
2576 buf
[0] = 0x82; /* command "set data bits high byte" */
2577 buf
[1] = high_output
;
2578 buf
[2] = high_direction
;
2579 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2581 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2583 LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
2584 return ERROR_JTAG_INIT_FAILED
;
2591 static int sheevaplug_init(void)
2597 low_direction
= 0x1b;
2599 /* initialize low byte for jtag */
2600 buf
[0] = 0x80; /* command "set data bits low byte" */
2601 buf
[1] = low_output
; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
2602 buf
[2] = low_direction
; /* dir (output=1), TCK/TDI/TMS=out, TDO=in */
2603 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2605 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2607 LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
2608 return ERROR_JTAG_INIT_FAILED
;
2617 high_direction
= 0x0f;
2619 /* nTRST is always push-pull */
2620 high_output
&= ~nTRSTnOE
;
2621 high_output
|= nTRST
;
2623 /* nSRST is always open-drain */
2624 high_output
|= nSRSTnOE
;
2625 high_output
&= ~nSRST
;
2627 /* initialize high port */
2628 buf
[0] = 0x82; /* command "set data bits high byte" */
2629 buf
[1] = high_output
; /* value */
2630 buf
[2] = high_direction
; /* all outputs - xRST */
2631 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2633 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2635 LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
2636 return ERROR_JTAG_INIT_FAILED
;
2642 static int cortino_jtag_init(void)
2648 low_direction
= 0x1b;
2650 /* initialize low byte for jtag */
2651 buf
[0] = 0x80; /* command "set data bits low byte" */
2652 buf
[1] = low_output
; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
2653 buf
[2] = low_direction
; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
2654 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2656 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2658 LOG_ERROR("couldn't initialize FT2232 with 'cortino' layout");
2659 return ERROR_JTAG_INIT_FAILED
;
2663 nTRSTnOE
= 0x00; /* no output enable for nTRST */
2665 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2668 high_direction
= 0x03;
2670 /* initialize high port */
2671 buf
[0] = 0x82; /* command "set data bits high byte" */
2672 buf
[1] = high_output
;
2673 buf
[2] = high_direction
;
2674 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2676 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) )
2678 LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
2679 return ERROR_JTAG_INIT_FAILED
;
2685 static void olimex_jtag_blink(void)
2687 /* Olimex ARM-USB-OCD has a LED connected to ACBUS3
2688 * ACBUS3 is bit 3 of the GPIOH port
2690 if (high_output
& 0x08)
2692 /* set port pin high */
2693 high_output
&= 0x07;
2697 /* set port pin low */
2698 high_output
|= 0x08;
2701 buffer_write( 0x82 );
2702 buffer_write( high_output
);
2703 buffer_write( high_direction
);
2707 static void flyswatter_jtag_blink(void)
2710 * Flyswatter has two LEDs connected to ACBUS2 and ACBUS3
2712 high_output
^= 0x0c;
2714 buffer_write( 0x82 );
2715 buffer_write( high_output
);
2716 buffer_write( high_direction
);
2720 static void turtle_jtag_blink(void)
2723 * Turtelizer2 has two LEDs connected to ACBUS2 and ACBUS3
2725 if (high_output
& 0x08)
2734 buffer_write( 0x82 );
2735 buffer_write( high_output
);
2736 buffer_write( high_direction
);
2740 static int ft2232_quit(void)
2742 #if BUILD_FT2232_FTD2XX == 1
2745 status
= FT_Close(ftdih
);
2746 #elif BUILD_FT2232_LIBFTDI == 1
2747 ftdi_usb_close(&ftdic
);
2749 ftdi_deinit(&ftdic
);
2752 free(ft2232_buffer
);
2753 ft2232_buffer
= NULL
;
2759 static int ft2232_handle_device_desc_command(struct command_context_s
* cmd_ctx
, char* cmd
, char** args
, int argc
)
2765 ft2232_device_desc
= strdup(args
[0]);
2766 cp
= strchr( ft2232_device_desc
, 0 );
2767 // under Win32, the FTD2XX driver appends an "A" to the end
2768 // of the description, this examines the given desc
2769 // and creates the 'missing' _A or non_A variable.
2770 if( (cp
[-1] == 'A') && (cp
[-2]==' ') ){
2771 // it was, so make this the "A" version.
2772 ft2232_device_desc_A
= ft2232_device_desc
;
2773 // and *CREATE* the non-A version.
2774 strcpy( buf
, ft2232_device_desc
);
2775 cp
= strchr( buf
, 0 );
2777 ft2232_device_desc
= strdup( buf
);
2779 // <space>A not defined
2781 sprintf( buf
, "%s A", ft2232_device_desc
);
2782 ft2232_device_desc_A
= strdup( buf
);
2787 LOG_ERROR("expected exactly one argument to ft2232_device_desc <description>");
2794 static int ft2232_handle_serial_command(struct command_context_s
* cmd_ctx
, char* cmd
, char** args
, int argc
)
2798 ft2232_serial
= strdup(args
[0]);
2802 LOG_ERROR("expected exactly one argument to ft2232_serial <serial-number>");
2809 static int ft2232_handle_layout_command(struct command_context_s
* cmd_ctx
, char* cmd
, char** args
, int argc
)
2814 ft2232_layout
= malloc(strlen(args
[0]) + 1);
2815 strcpy(ft2232_layout
, args
[0]);
2821 static int ft2232_handle_vid_pid_command(struct command_context_s
* cmd_ctx
, char* cmd
, char** args
, int argc
)
2825 if (argc
> MAX_USB_IDS
* 2)
2827 LOG_WARNING("ignoring extra IDs in ft2232_vid_pid "
2828 "(maximum is %d pairs)", MAX_USB_IDS
);
2829 argc
= MAX_USB_IDS
* 2;
2831 if ( argc
< 2 || (argc
& 1) )
2833 LOG_WARNING("incomplete ft2232_vid_pid configuration directive");
2838 for (i
= 0; i
+ 1 < argc
; i
+= 2)
2840 ft2232_vid
[i
>> 1] = strtol(args
[i
], NULL
, 0);
2841 ft2232_pid
[i
>> 1] = strtol(args
[i
+ 1], NULL
, 0);
2845 * Explicitly terminate, in case there are multiples instances of
2848 ft2232_vid
[i
>> 1] = ft2232_pid
[i
>> 1] = 0;
2854 static int ft2232_handle_latency_command(struct command_context_s
* cmd_ctx
, char* cmd
, char** args
, int argc
)
2858 ft2232_latency
= atoi(args
[0]);
2862 LOG_ERROR("expected exactly one argument to ft2232_latency <ms>");
2869 static int ft2232_stableclocks(int num_cycles
, jtag_command_t
* cmd
)
2873 /* 7 bits of either ones or zeros. */
2874 u8 tms
= (tap_get_state() == TAP_RESET
? 0x7F : 0x00);
2876 while (num_cycles
> 0)
2878 /* the command 0x4b, "Clock Data to TMS/CS Pin (no Read)" handles
2879 * at most 7 bits per invocation. Here we invoke it potentially
2882 int bitcount_per_command
= (num_cycles
> 7) ? 7 : num_cycles
;
2884 if (ft2232_buffer_size
+ 3 >= FT2232_BUFFER_SIZE
)
2886 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
2887 retval
= ERROR_JTAG_QUEUE_FAILED
;
2892 /* there are no state transitions in this code, so omit state tracking */
2894 /* command "Clock Data to TMS/CS Pin (no Read)" */
2895 buffer_write( 0x4b );
2898 buffer_write( bitcount_per_command
- 1 );
2900 /* TMS data bits are either all zeros or ones to stay in the current stable state */
2901 buffer_write( tms
);
2905 num_cycles
-= bitcount_per_command
;
2912 /* ---------------------------------------------------------------------
2913 * Support for IceBear JTAG adapter from Section5:
2914 * http://section5.ch/icebear
2916 * Author: Sten, debian@sansys-electronic.com
2919 /* Icebear pin layout
2921 * ADBUS5 (nEMU) nSRST | 2 1| GND (10k->VCC)
2922 * GND GND | 4 3| n.c.
2923 * ADBUS3 TMS | 6 5| ADBUS6 VCC
2924 * ADBUS0 TCK | 8 7| ADBUS7 (GND)
2925 * ADBUS4 nTRST |10 9| ACBUS0 (GND)
2926 * ADBUS1 TDI |12 11| ACBUS1 (GND)
2927 * ADBUS2 TDO |14 13| GND GND
2929 * ADBUS0 O L TCK ACBUS0 GND
2930 * ADBUS1 O L TDI ACBUS1 GND
2931 * ADBUS2 I TDO ACBUS2 n.c.
2932 * ADBUS3 O H TMS ACBUS3 n.c.
2938 static int icebear_jtag_init(void) {
2942 low_direction
= 0x0b; /* output: TCK TDI TMS; input: TDO */
2943 low_output
= 0x08; /* high: TMS; low: TCK TDI */
2947 if ((jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) != 0) {
2948 low_direction
&= ~nTRST
; /* nTRST high impedance */
2951 low_direction
|= nTRST
;
2952 low_output
|= nTRST
;
2955 low_direction
|= nSRST
;
2956 low_output
|= nSRST
;
2958 /* initialize low byte for jtag */
2959 buf
[0] = 0x80; /* command "set data bits low byte" */
2960 buf
[1] = low_output
;
2961 buf
[2] = low_direction
;
2962 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2964 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) ) {
2965 LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (low)");
2966 return ERROR_JTAG_INIT_FAILED
;
2970 high_direction
= 0x00;
2973 /* initialize high port */
2974 buf
[0] = 0x82; /* command "set data bits high byte" */
2975 buf
[1] = high_output
; /* value */
2976 buf
[2] = high_direction
; /* all outputs (xRST and xRSTnOE) */
2977 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2979 if ( ( ( ft2232_write(buf
, 3, &bytes_written
) ) != ERROR_OK
) || (bytes_written
!= 3) ) {
2980 LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (high)");
2981 return ERROR_JTAG_INIT_FAILED
;
2987 static void icebear_jtag_reset(int trst
, int srst
) {
2990 low_direction
|= nTRST
;
2991 low_output
&= ~nTRST
;
2993 else if (trst
== 0) {
2994 if ((jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) != 0)
2995 low_direction
&= ~nTRST
;
2997 low_output
|= nTRST
;
3001 low_output
&= ~nSRST
;
3003 else if (srst
== 0) {
3004 low_output
|= nSRST
;
3007 /* command "set data bits low byte" */
3008 buffer_write( 0x80 );
3009 buffer_write( low_output
);
3010 buffer_write( low_direction
);
3012 LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst
, srst
, low_output
, low_direction
);
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)