ddeadb46638e5335dd8c4359eaaa4762ef9fe540
[openocd.git] / src / jtag / interfaces.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * Copyright (C) 2007,2008 √ėyvind Harboe *
6 * oyvind.harboe@zylin.com *
7 * *
8 * Copyright (C) 2009 SoftPLC Corporation *
9 * http://softplc.com *
10 * dick@softplc.com *
11 * *
12 * Copyright (C) 2009 Zachary T Welch *
13 * zw@superlucidity.net *
14 * *
15 * This program is free software; you can redistribute it and/or modify *
16 * it under the terms of the GNU General Public License as published by *
17 * the Free Software Foundation; either version 2 of the License, or *
18 * (at your option) any later version. *
19 * *
20 * This program is distributed in the hope that it will be useful, *
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
23 * GNU General Public License for more details. *
24 * *
25 * You should have received a copy of the GNU General Public License *
26 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
27 ***************************************************************************/
28
29 #ifdef HAVE_CONFIG_H
30 #include "config.h"
31 #endif
32
33 #include "interfaces.h"
34
35 /** @file
36 * This file includes declarations for all built-in jtag interfaces,
37 * which are then listed in the jtag_interfaces array.
38 *
39 * Dynamic loading can be implemented be searching for shared libraries
40 * that contain a jtag_interface structure that can added to this list.
41 */
42
43 #if BUILD_ZY1000 == 1
44 extern struct jtag_interface zy1000_interface;
45 #elif defined(BUILD_MINIDRIVER_DUMMY)
46 extern struct jtag_interface minidummy_interface;
47 #else /* standard drivers */
48 #if BUILD_PARPORT == 1
49 extern struct jtag_interface parport_interface;
50 #endif
51 #if BUILD_DUMMY == 1
52 extern struct jtag_interface dummy_interface;
53 #endif
54 #if BUILD_FTDI == 1
55 extern struct jtag_interface ftdi_interface;
56 #endif
57 #if BUILD_USB_BLASTER == 1 || BUILD_USB_BLASTER_2 == 1
58 extern struct jtag_interface usb_blaster_interface;
59 #endif
60 #if BUILD_JTAG_VPI == 1
61 extern struct jtag_interface jtag_vpi_interface;
62 #endif
63 #if BUILD_FT232R == 1
64 extern struct jtag_interface ft232r_interface;
65 #endif
66 #if BUILD_AMTJTAGACCEL == 1
67 extern struct jtag_interface amt_jtagaccel_interface;
68 #endif
69 #if BUILD_EP93XX == 1
70 extern struct jtag_interface ep93xx_interface;
71 #endif
72 #if BUILD_AT91RM9200 == 1
73 extern struct jtag_interface at91rm9200_interface;
74 #endif
75 #if BUILD_GW16012 == 1
76 extern struct jtag_interface gw16012_interface;
77 #endif
78 #if BUILD_PRESTO
79 extern struct jtag_interface presto_interface;
80 #endif
81 #if BUILD_USBPROG == 1
82 extern struct jtag_interface usbprog_interface;
83 #endif
84 #if BUILD_OPENJTAG == 1
85 extern struct jtag_interface openjtag_interface;
86 #endif
87 #if BUILD_JLINK == 1
88 extern struct jtag_interface jlink_interface;
89 #endif
90 #if BUILD_VSLLINK == 1
91 extern struct jtag_interface vsllink_interface;
92 #endif
93 #if BUILD_RLINK == 1
94 extern struct jtag_interface rlink_interface;
95 #endif
96 #if BUILD_ULINK == 1
97 extern struct jtag_interface ulink_interface;
98 #endif
99 #if BUILD_ARMJTAGEW == 1
100 extern struct jtag_interface armjtagew_interface;
101 #endif
102 #if BUILD_BUSPIRATE == 1
103 extern struct jtag_interface buspirate_interface;
104 #endif
105 #if BUILD_REMOTE_BITBANG == 1
106 extern struct jtag_interface remote_bitbang_interface;
107 #endif
108 #if BUILD_HLADAPTER == 1
109 extern struct jtag_interface hl_interface;
110 #endif
111 #if BUILD_OSBDM == 1
112 extern struct jtag_interface osbdm_interface;
113 #endif
114 #if BUILD_OPENDOUS == 1
115 extern struct jtag_interface opendous_interface;
116 #endif
117 #if BUILD_SYSFSGPIO == 1
118 extern struct jtag_interface sysfsgpio_interface;
119 #endif
120 #if BUILD_AICE == 1
121 extern struct jtag_interface aice_interface;
122 #endif
123 #if BUILD_BCM2835GPIO == 1
124 extern struct jtag_interface bcm2835gpio_interface;
125 #endif
126 #if BUILD_CMSIS_DAP == 1
127 extern struct jtag_interface cmsis_dap_interface;
128 #endif
129 #if BUILD_KITPROG == 1
130 extern struct jtag_interface kitprog_interface;
131 #endif
132 #if BUILD_IMX_GPIO == 1
133 extern struct jtag_interface imx_gpio_interface;
134 #endif
135 #endif /* standard drivers */
136
137 /**
138 * The list of built-in JTAG interfaces, containing entries for those
139 * drivers that were enabled by the @c configure script.
140 *
141 * The list should be defined to contain either one minidriver interface
142 * or some number of standard driver interfaces, never both.
143 */
144 struct jtag_interface *jtag_interfaces[] = {
145 #if BUILD_ZY1000 == 1
146 &zy1000_interface,
147 #elif defined(BUILD_MINIDRIVER_DUMMY)
148 &minidummy_interface,
149 #else /* standard drivers */
150 #if BUILD_PARPORT == 1
151 &parport_interface,
152 #endif
153 #if BUILD_DUMMY == 1
154 &dummy_interface,
155 #endif
156 #if BUILD_FTDI == 1
157 &ftdi_interface,
158 #endif
159 #if BUILD_USB_BLASTER || BUILD_USB_BLASTER_2 == 1
160 &usb_blaster_interface,
161 #endif
162 #if BUILD_JTAG_VPI == 1
163 &jtag_vpi_interface,
164 #endif
165 #if BUILD_FT232R == 1
166 &ft232r_interface,
167 #endif
168 #if BUILD_AMTJTAGACCEL == 1
169 &amt_jtagaccel_interface,
170 #endif
171 #if BUILD_EP93XX == 1
172 &ep93xx_interface,
173 #endif
174 #if BUILD_AT91RM9200 == 1
175 &at91rm9200_interface,
176 #endif
177 #if BUILD_GW16012 == 1
178 &gw16012_interface,
179 #endif
180 #if BUILD_PRESTO
181 &presto_interface,
182 #endif
183 #if BUILD_USBPROG == 1
184 &usbprog_interface,
185 #endif
186 #if BUILD_OPENJTAG == 1
187 &openjtag_interface,
188 #endif
189 #if BUILD_JLINK == 1
190 &jlink_interface,
191 #endif
192 #if BUILD_VSLLINK == 1
193 &vsllink_interface,
194 #endif
195 #if BUILD_RLINK == 1
196 &rlink_interface,
197 #endif
198 #if BUILD_ULINK == 1
199 &ulink_interface,
200 #endif
201 #if BUILD_ARMJTAGEW == 1
202 &armjtagew_interface,
203 #endif
204 #if BUILD_BUSPIRATE == 1
205 &buspirate_interface,
206 #endif
207 #if BUILD_REMOTE_BITBANG == 1
208 &remote_bitbang_interface,
209 #endif
210 #if BUILD_HLADAPTER == 1
211 &hl_interface,
212 #endif
213 #if BUILD_OSBDM == 1
214 &osbdm_interface,
215 #endif
216 #if BUILD_OPENDOUS == 1
217 &opendous_interface,
218 #endif
219 #if BUILD_SYSFSGPIO == 1
220 &sysfsgpio_interface,
221 #endif
222 #if BUILD_AICE == 1
223 &aice_interface,
224 #endif
225 #if BUILD_BCM2835GPIO == 1
226 &bcm2835gpio_interface,
227 #endif
228 #if BUILD_CMSIS_DAP == 1
229 &cmsis_dap_interface,
230 #endif
231 #if BUILD_KITPROG == 1
232 &kitprog_interface,
233 #endif
234 #if BUILD_IMX_GPIO == 1
235 &imx_gpio_interface,
236 #endif
237 #endif /* standard drivers */
238 NULL,
239 };
240
241 void jtag_interface_modules_load(const char *path)
242 {
243 /* @todo: implement dynamic module loading for JTAG interface drivers */
244 }

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)