src/jtag/parport.c

   1 /***************************************************************************
   2  *   Copyright (C) 2005 by Dominic Rath                                    *
   3  *   Dominic.Rath@gmx.de                                                   *
   4  *                                                                         *
   5  *   Copyright (C) 2008 by Spencer Oliver                                  *
   6  *   spen@spen-soft.co.uk                                                  *
   7  *                                                                         *
   8  *   This program is free software; you can redistribute it and/or modify  *
   9  *   it under the terms of the GNU General Public License as published by  *
  10  *   the Free Software Foundation; either version 2 of the License, or     *
  11  *   (at your option) any later version.                                   *
  12  *                                                                         *
  13  *   This program is distributed in the hope that it will be useful,       *
  14  *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
  15  *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
  16  *   GNU General Public License for more details.                          *
  17  *                                                                         *
  18  *   You should have received a copy of the GNU General Public License     *
  19  *   along with this program; if not, write to the                         *
  20  *   Free Software Foundation, Inc.,                                       *
  21  *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
  22  ***************************************************************************/
  23 #ifdef HAVE_CONFIG_H
  24 #include "config.h"
  25 #endif
  26
  27 #include "interface.h"
  28 #include "bitbang.h"
  29
  30 /* -ino: 060521-1036 */
  31 #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
  32 #include <machine/sysarch.h>
  33 #include <machine/cpufunc.h>
  34 #define ioperm(startport,length,enable)\
  35   i386_set_ioperm((startport), (length), (enable))
  36 #endif /* __FreeBSD__ */
  37
  38 #if PARPORT_USE_PPDEV == 1
  39 #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
  40 #include <dev/ppbus/ppi.h>
  41 #include <dev/ppbus/ppbconf.h>
  42 #define PPRSTATUS       PPIGSTATUS
  43 #define PPWDATA         PPISDATA
  44 #else
  45 #include <linux/parport.h>
  46 #include <linux/ppdev.h>
  47 #endif
  48 #include <sys/ioctl.h>
  49 #else /* not PARPORT_USE_PPDEV */
  50 #ifndef _WIN32
  51 #include <sys/io.h>
  52 #endif
  53 #endif
  54
  55 #if PARPORT_USE_GIVEIO == 1 && IS_CYGWIN == 1
  56 #include <windows.h>
  57 #endif
  58
  59
  60 /* parallel port cable description
  61  */
  62 typedef struct cable_s
  63 {
  64         char* name;
  65         uint8_t TDO_MASK;       /* status port bit containing current TDO value */
  66         uint8_t TRST_MASK;      /* data port bit for TRST */
  67         uint8_t TMS_MASK;       /* data port bit for TMS */
  68         uint8_t TCK_MASK;       /* data port bit for TCK */
  69         uint8_t TDI_MASK;       /* data port bit for TDI */
  70         uint8_t SRST_MASK;      /* data port bit for SRST */
  71         uint8_t OUTPUT_INVERT;  /* data port bits that should be inverted */
  72         uint8_t INPUT_INVERT;   /* status port that should be inverted */
  73         uint8_t PORT_INIT;      /* initialize data port with this value */
  74         uint8_t PORT_EXIT;      /* de-initialize data port with this value */
  75         uint8_t LED_MASK;       /* data port bit for LED */
  76 } cable_t;
  77
  78 static cable_t cables[] =
  79 {
  80         /* name                                 tdo   trst  tms   tck   tdi   srst  o_inv i_inv init  exit  led */
  81         { "wiggler",                    0x80, 0x10, 0x02, 0x04, 0x08, 0x01, 0x01, 0x80, 0x80, 0x80, 0x00 },
  82         { "wiggler2",                   0x80, 0x10, 0x02, 0x04, 0x08, 0x01, 0x01, 0x80, 0x80, 0x00, 0x20 },
  83         { "wiggler_ntrst_inverted",
  84                                                         0x80, 0x10, 0x02, 0x04, 0x08, 0x01, 0x11, 0x80, 0x80, 0x80, 0x00 },
  85         { "old_amt_wiggler",    0x80, 0x01, 0x02, 0x04, 0x08, 0x10, 0x11, 0x80, 0x80, 0x80, 0x00 },
  86         { "arm-jtag",                   0x80, 0x01, 0x02, 0x04, 0x08, 0x10, 0x01, 0x80, 0x80, 0x80, 0x00 },
  87         { "chameleon",                  0x80, 0x00, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00 },
  88         { "dlc5",                               0x10, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00 },
  89         { "triton",                             0x80, 0x08, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00 },
  90         { "lattice",                    0x40, 0x10, 0x04, 0x02, 0x01, 0x08, 0x00, 0x00, 0x18, 0x18, 0x00 },
  91         { "flashlink",                  0x20, 0x10, 0x02, 0x01, 0x04, 0x20, 0x30, 0x20, 0x00, 0x00, 0x00 },
  92 /* Altium Universal JTAG cable. Set the cable to Xilinx Mode and wire to target as follows:
  93         HARD TCK - Target TCK
  94         HARD TMS - Target TMS
  95         HARD TDI - Target TDI
  96         HARD TDO - Target TDO
  97         SOFT TCK - Target TRST
  98         SOFT TDI - Target SRST
  99 */
 100         { "altium",                     0x10, 0x20, 0x04, 0x02, 0x01, 0x80, 0x00, 0x00, 0x10, 0x00, 0x08 },
 101         { NULL,                         0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
 102 };
 103
 104 /* configuration */
 105 static char* parport_cable = NULL;
 106 static uint16_t parport_port;
 107 static int parport_exit = 0;
 108
 109 /* interface variables
 110  */
 111 static cable_t* cable;
 112 static uint8_t dataport_value = 0x0;
 113
 114 #if PARPORT_USE_PPDEV == 1
 115 static int device_handle;
 116 #else
 117 static unsigned long dataport;
 118 static unsigned long statusport;
 119 #endif
 120
 121 /* low level command set
 122  */
 123 static int parport_read(void);
 124 static void parport_write(int tck, int tms, int tdi);
 125 static void parport_reset(int trst, int srst);
 126 static void parport_led(int on);
 127
 128 static int parport_speed(int speed);
 129 static int parport_register_commands(struct command_context_s *cmd_ctx);
 130 static int parport_init(void);
 131 static int parport_quit(void);
 132
 133 /* interface commands */
 134 static int parport_handle_parport_port_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
 135 static int parport_handle_parport_cable_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
 136 static int parport_handle_write_on_exit_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
 137
 138 jtag_interface_t parport_interface =
 139 {
 140         .name = "parport",
 141
 142         .execute_queue = bitbang_execute_queue,
 143
 144         .speed = parport_speed,
 145         .register_commands = parport_register_commands,
 146         .init = parport_init,
 147         .quit = parport_quit,
 148 };
 149
 150 static bitbang_interface_t parport_bitbang =
 151 {
 152         .read = parport_read,
 153         .write = parport_write,
 154         .reset = parport_reset,
 155         .blink = parport_led
 156 };
 157
 158 static int parport_read(void)
 159 {
 160         int data = 0;
 161
 162 #if PARPORT_USE_PPDEV == 1
 163         ioctl(device_handle, PPRSTATUS, & data);
 164 #else
 165         data = inb(statusport);
 166 #endif
 167
 168         if ((data ^ cable->INPUT_INVERT) & cable->TDO_MASK)
 169                 return 1;
 170         else
 171                 return 0;
 172 }
 173
 174 static __inline__ void parport_write_data(void)
 175 {
 176         uint8_t output;
 177         output = dataport_value ^ cable->OUTPUT_INVERT;
 178
 179 #if PARPORT_USE_PPDEV == 1
 180         ioctl(device_handle, PPWDATA, &output);
 181 #else
 182 #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
 183         outb(dataport, output);
 184 #else
 185         outb(output, dataport);
 186 #endif
 187 #endif
 188 }
 189
 190 static void parport_write(int tck, int tms, int tdi)
 191 {
 192         int i = jtag_get_speed() + 1;
 193
 194         if (tck)
 195                 dataport_value |= cable->TCK_MASK;
 196         else
 197                 dataport_value &= ~cable->TCK_MASK;
 198
 199         if (tms)
 200                 dataport_value |= cable->TMS_MASK;
 201         else
 202                 dataport_value &= ~cable->TMS_MASK;
 203
 204         if (tdi)
 205                 dataport_value |= cable->TDI_MASK;
 206         else
 207                 dataport_value &= ~cable->TDI_MASK;
 208
 209         while (i-- > 0)
 210                 parport_write_data();
 211 }
 212
 213 /* (1) assert or (0) deassert reset lines */
 214 static void parport_reset(int trst, int srst)
 215 {
 216         LOG_DEBUG("trst: %i, srst: %i", trst, srst);
 217
 218         if (trst == 0)
 219                 dataport_value |= cable->TRST_MASK;
 220         else if (trst == 1)
 221                 dataport_value &= ~cable->TRST_MASK;
 222
 223         if (srst == 0)
 224                 dataport_value |= cable->SRST_MASK;
 225         else if (srst == 1)
 226                 dataport_value &= ~cable->SRST_MASK;
 227
 228         parport_write_data();
 229 }
 230
 231 /* turn LED on parport adapter on (1) or off (0) */
 232 static void parport_led(int on)
 233 {
 234         if (on)
 235                 dataport_value |= cable->LED_MASK;
 236         else
 237                 dataport_value &= ~cable->LED_MASK;
 238
 239         parport_write_data();
 240 }
 241
 242 static int parport_speed(int speed)
 243 {
 244         return ERROR_OK;
 245 }
 246
 247 static int parport_register_commands(struct command_context_s *cmd_ctx)
 248 {
 249         register_command(cmd_ctx, NULL, "parport_port", parport_handle_parport_port_command,
 250                 COMMAND_CONFIG, "either the address of the I/O port or the number of the �/dev/parport� device");
 251         register_command(cmd_ctx, NULL, "parport_cable", parport_handle_parport_cable_command,
 252                 COMMAND_CONFIG, "the layout of the parallel port cable used to connect to the target");
 253         register_command(cmd_ctx, NULL, "parport_write_on_exit", parport_handle_write_on_exit_command,
 254                 COMMAND_CONFIG, "configure the parallel driver to write a known value to the parallel interface");
 255
 256         return ERROR_OK;
 257 }
 258
 259 #if PARPORT_USE_GIVEIO == 1
 260 static int parport_get_giveio_access(void)
 261 {
 262         HANDLE h;
 263         OSVERSIONINFO version;
 264
 265         version.dwOSVersionInfoSize = sizeof version;
 266         if (!GetVersionEx(&version)) {
 267                 errno = EINVAL;
 268                 return -1;
 269         }
 270         if (version.dwPlatformId != VER_PLATFORM_WIN32_NT)
 271                 return 0;
 272
 273         h = CreateFile("\\\\.\\giveio", GENERIC_READ, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
 274         if (h == INVALID_HANDLE_VALUE) {
 275                 errno = ENODEV;
 276                 return -1;
 277         }
 278
 279         CloseHandle(h);
 280
 281         return 0;
 282 }
 283 #endif
 284
 285 static int parport_init(void)
 286 {
 287         cable_t *cur_cable;
 288 #if PARPORT_USE_PPDEV == 1
 289         char buffer[256];
 290         int i = 0;
 291 #endif
 292
 293         cur_cable = cables;
 294
 295         if ((parport_cable == NULL) || (parport_cable[0] == 0))
 296         {
 297                 parport_cable = "wiggler";
 298                 LOG_WARNING("No parport cable specified, using default 'wiggler'");
 299         }
 300
 301         while (cur_cable->name)
 302         {
 303                 if (strcmp(cur_cable->name, parport_cable) == 0)
 304                 {
 305                         cable = cur_cable;
 306                         break;
 307                 }
 308                 cur_cable++;
 309         }
 310
 311         if (!cable)
 312         {
 313                 LOG_ERROR("No matching cable found for %s", parport_cable);
 314                 return ERROR_JTAG_INIT_FAILED;
 315         }
 316
 317         dataport_value = cable->PORT_INIT;
 318
 319 #if PARPORT_USE_PPDEV == 1
 320         if (device_handle > 0)
 321         {
 322                 LOG_ERROR("device is already opened");
 323                 return ERROR_JTAG_INIT_FAILED;
 324         }
 325
 326 #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
 327         LOG_DEBUG("opening /dev/ppi%d...", parport_port);
 328
 329         snprintf(buffer, 256, "/dev/ppi%d", parport_port);
 330         device_handle = open(buffer, O_WRONLY);
 331 #else /* not __FreeBSD__, __FreeBSD_kernel__ */
 332         LOG_DEBUG("opening /dev/parport%d...", parport_port);
 333
 334         snprintf(buffer, 256, "/dev/parport%d", parport_port);
 335         device_handle = open(buffer, O_WRONLY);
 336 #endif /* __FreeBSD__, __FreeBSD_kernel__ */
 337
 338         if (device_handle < 0)
 339         {
 340                 int err = errno;
 341                 LOG_ERROR("cannot open device. check it exists and that user read and write rights are set. errno=%d", err);
 342                 return ERROR_JTAG_INIT_FAILED;
 343         }
 344
 345         LOG_DEBUG("...open");
 346
 347 #if !defined(__FreeBSD__) && !defined(__FreeBSD_kernel__)
 348         i = ioctl(device_handle, PPCLAIM);
 349         if (i < 0)
 350         {
 351                 LOG_ERROR("cannot claim device");
 352                 return ERROR_JTAG_INIT_FAILED;
 353         }
 354
 355         i = PARPORT_MODE_COMPAT;
 356         i= ioctl(device_handle, PPSETMODE, & i);
 357         if (i < 0)
 358         {
 359                 LOG_ERROR(" cannot set compatible mode to device");
 360                 return ERROR_JTAG_INIT_FAILED;
 361         }
 362
 363         i = IEEE1284_MODE_COMPAT;
 364         i = ioctl(device_handle, PPNEGOT, & i);
 365         if (i < 0)
 366         {
 367                 LOG_ERROR("cannot set compatible 1284 mode to device");
 368                 return ERROR_JTAG_INIT_FAILED;
 369         }
 370 #endif /* not __FreeBSD__, __FreeBSD_kernel__ */
 371
 372 #else /* not PARPORT_USE_PPDEV */
 373         if (parport_port == 0)
 374         {
 375                 parport_port = 0x378;
 376                 LOG_WARNING("No parport port specified, using default '0x378' (LPT1)");
 377         }
 378
 379         dataport = parport_port;
 380         statusport = parport_port + 1;
 381
 382         LOG_DEBUG("requesting privileges for parallel port 0x%lx...", dataport);
 383 #if PARPORT_USE_GIVEIO == 1
 384         if (parport_get_giveio_access() != 0)
 385 #else /* PARPORT_USE_GIVEIO */
 386         if (ioperm(dataport, 3, 1) != 0)
 387 #endif /* PARPORT_USE_GIVEIO */
 388         {
 389                 LOG_ERROR("missing privileges for direct i/o");
 390                 return ERROR_JTAG_INIT_FAILED;
 391         }
 392         LOG_DEBUG("...privileges granted");
 393
 394         /* make sure parallel port is in right mode (clear tristate and interrupt */
 395         #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
 396                 outb(parport_port + 2, 0x0);
 397         #else
 398                 outb(0x0, parport_port + 2);
 399         #endif
 400
 401 #endif /* PARPORT_USE_PPDEV */
 402
 403         parport_reset(0, 0);
 404         parport_write(0, 0, 0);
 405         parport_led(1);
 406
 407         bitbang_interface = &parport_bitbang;
 408
 409         return ERROR_OK;
 410 }
 411
 412 static int parport_quit(void)
 413 {
 414         parport_led(0);
 415
 416         if (parport_exit)
 417         {
 418                 dataport_value = cable->PORT_EXIT;
 419                 parport_write_data();
 420         }
 421
 422         if (parport_cable)
 423         {
 424                 free(parport_cable);
 425                 parport_cable = NULL;
 426         }
 427
 428         return ERROR_OK;
 429 }
 430
 431 static int parport_handle_parport_port_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
 432 {
 433         if (argc == 1)
 434         {
 435                 /* only if the port wasn't overwritten by cmdline */
 436                 if (parport_port == 0)
 437                 {
 438                         int retval = parse_u16(args[0], &parport_port);
 439                         if (ERROR_OK != retval)
 440                                 return retval;
 441                 }
 442                 else
 443                 {
 444                         LOG_ERROR("The parport port was already configured!");
 445                         return ERROR_FAIL;
 446                 }
 447         }
 448
 449         command_print(cmd_ctx, "parport port = %u", parport_port);
 450
 451         return ERROR_OK;
 452 }
 453
 454 static int parport_handle_parport_cable_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
 455 {
 456         if (argc == 0)
 457                 return ERROR_OK;
 458
 459         /* only if the cable name wasn't overwritten by cmdline */
 460         if (parport_cable == 0)
 461         {
 462                 parport_cable = malloc(strlen(args[0]) + sizeof(char));
 463                 strcpy(parport_cable, args[0]);
 464         }
 465
 466         return ERROR_OK;
 467 }
 468
 469 static int parport_handle_write_on_exit_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
 470 {
 471         if (argc != 1)
 472         {
 473                 command_print(cmd_ctx, "usage: parport_write_on_exit <on | off>");
 474                 return ERROR_OK;
 475         }
 476
 477         if (strcmp(args[0], "on") == 0)
 478                 parport_exit = 1;
 479         else if (strcmp(args[0], "off") == 0)
 480                 parport_exit = 0;
 481
 482         return ERROR_OK;
 483 }