use COMMAND_PARSE_ON_OFF where appropriate

[openocd.git] / src / jtag / zy1000 / zy1000.c

/***************************************************************************
 *   Copyright (C) 2007-2008 by Øyvind Harboe                              *
 *                                                                         *
 *   This program is free software; you can redistribute it and/or modify  *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation; either version 2 of the License, or     *
 *   (at your option) any later version.                                   *
 *                                                                         *
 *   This program is distributed in the hope that it will be useful,       *
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 *   GNU General Public License for more details.                          *
 *                                                                         *
 *   You should have received a copy of the GNU General Public License     *
 *   along with this program; if not, write to the                         *
 *   Free Software Foundation, Inc.,                                       *
 *   59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
 ***************************************************************************/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include "embeddedice.h"
#include "minidriver.h"
#include "interface.h"
#include "zy1000_version.h"

#include <cyg/hal/hal_io.h>             // low level i/o
#include <cyg/hal/hal_diag.h>

#include <time.h>

#define ZYLIN_VERSION GIT_ZY1000_VERSION
#define ZYLIN_DATE __DATE__
#define ZYLIN_TIME __TIME__
#define ZYLIN_OPENOCD GIT_OPENOCD_VERSION
#define ZYLIN_OPENOCD_VERSION "ZY1000 " ZYLIN_VERSION " " ZYLIN_DATE

/* low level command set
 */
void zy1000_reset(int trst, int srst);


int zy1000_speed(int speed);
int zy1000_register_commands(struct command_context *cmd_ctx);
int zy1000_init(void);
int zy1000_quit(void);

/* interface commands */
int zy1000_handle_zy1000_port_command(struct command_context *cmd_ctx, char *cmd, char **args, int argc);

static int zy1000_khz(int khz, int *jtag_speed)
{
        if (khz == 0)
        {
                *jtag_speed = 0;
        }
        else
        {
                *jtag_speed = 64000/khz;
        }
        return ERROR_OK;
}

static int zy1000_speed_div(int speed, int *khz)
{
        if (speed == 0)
        {
                *khz = 0;
        }
        else
        {
                *khz = 64000/speed;
        }

        return ERROR_OK;
}

static bool readPowerDropout(void)
{
        cyg_uint32 state;
        // sample and clear power dropout
        HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x10, 0x80);
        HAL_READ_UINT32(ZY1000_JTAG_BASE + 0x10, state);
        bool powerDropout;
        powerDropout = (state & 0x80) != 0;
        return powerDropout;
}


static bool readSRST(void)
{
        cyg_uint32 state;
        // sample and clear SRST sensing
        HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x10, 0x00000040);
        HAL_READ_UINT32(ZY1000_JTAG_BASE + 0x10, state);
        bool srstAsserted;
        srstAsserted = (state & 0x40) != 0;
        return srstAsserted;
}

static int zy1000_srst_asserted(int *srst_asserted)
{
        *srst_asserted = readSRST();
        return ERROR_OK;
}

static int zy1000_power_dropout(int *dropout)
{
        *dropout = readPowerDropout();
        return ERROR_OK;
}


struct jtag_interface zy1000_interface =
{
        .name = "ZY1000",
        .execute_queue = NULL,
        .speed = zy1000_speed,
        .register_commands = zy1000_register_commands,
        .init = zy1000_init,
        .quit = zy1000_quit,
        .khz = zy1000_khz,
        .speed_div = zy1000_speed_div,
        .power_dropout = zy1000_power_dropout,
        .srst_asserted = zy1000_srst_asserted,
};

void zy1000_reset(int trst, int srst)
{
        LOG_DEBUG("zy1000 trst=%d, srst=%d", trst, srst);
        if (!srst)
        {
                ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x00000001);
        }
        else
        {
                /* Danger!!! if clk != 0 when in
                 * idle in TAP_IDLE, reset halt on str912 will fail.
                 */
                ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x00000001);
        }

        if (!trst)
        {
                ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x00000002);
        }
        else
        {
                /* assert reset */
                ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x00000002);
        }

        if (trst||(srst && (jtag_get_reset_config() & RESET_SRST_PULLS_TRST)))
        {
                waitIdle();
                /* we're now in the RESET state until trst is deasserted */
                ZY1000_POKE(ZY1000_JTAG_BASE + 0x20, TAP_RESET);
        } else
        {
                /* We'll get RCLK failure when we assert TRST, so clear any false positives here */
                ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x400);
        }

        /* wait for srst to float back up */
        if (!srst)
        {
                int i;
                for (i = 0; i < 1000; i++)
                {
                        // We don't want to sense our own reset, so we clear here.
                        // There is of course a timing hole where we could loose
                        // a "real" reset.
                        if (!readSRST())
                                break;

                        /* wait 1ms */
                        alive_sleep(1);
                }

                if (i == 1000)
                {
                        LOG_USER("SRST didn't deassert after %dms", i);
                } else if (i > 1)
                {
                        LOG_USER("SRST took %dms to deassert", i);
                }
        }
}

int zy1000_speed(int speed)
{
        if (speed == 0)
        {
                /*0 means RCLK*/
                speed = 0;
                ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x100);
                LOG_DEBUG("jtag_speed using RCLK");
        }
        else
        {
                if (speed > 8190 || speed < 2)
                {
                        LOG_USER("valid ZY1000 jtag_speed=[8190,2]. Divisor is 64MHz / even values between 8190-2, i.e. min 7814Hz, max 32MHz");
                        return ERROR_INVALID_ARGUMENTS;
                }

                LOG_USER("jtag_speed %d => JTAG clk=%f", speed, 64.0/(float)speed);
                ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x100);
                ZY1000_POKE(ZY1000_JTAG_BASE + 0x1c, speed&~1);
        }
        return ERROR_OK;
}

static bool savePower;


static void setPower(bool power)
{
        savePower = power;
        if (power)
        {
                HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x14, 0x8);
        } else
        {
                HAL_WRITE_UINT32(ZY1000_JTAG_BASE + 0x10, 0x8);
        }
}

int handle_power_command(struct command_context *cmd_ctx, char *cmd, char **args, int argc)
{
        if (argc > 1)
        {
                return ERROR_INVALID_ARGUMENTS;
        }

        if (argc == 1)
        {
                bool enable;
                COMMAND_PARSE_ON_OFF(args[0], enable);
                setPower(enable);
        }

        command_print(cmd_ctx, "Target power %s", savePower ? "on" : "off");

        return ERROR_OK;
}


/* Give TELNET a way to find out what version this is */
static int jim_zy1000_version(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
        if ((argc < 1) || (argc > 3))
                return JIM_ERR;
        const char *version_str = NULL;

        if (argc == 1)
        {
                version_str = ZYLIN_OPENOCD_VERSION;
        } else
        {
                const char *str = Jim_GetString(argv[1], NULL);
                const char *str2 = NULL;
                if (argc > 2)
                        str2 = Jim_GetString(argv[2], NULL);
                if (strcmp("openocd", str) == 0)
                {
                        version_str = ZYLIN_OPENOCD;
                }
                else if (strcmp("zy1000", str) == 0)
                {
                        version_str = ZYLIN_VERSION;
                }
                else if (strcmp("date", str) == 0)
                {
                        version_str = ZYLIN_DATE;
                }
                else if (strcmp("time", str) == 0)
                {
                        version_str = ZYLIN_TIME;
                }
                else if (strcmp("pcb", str) == 0)
                {
#ifdef CYGPKG_HAL_NIOS2
                        version_str="c";
#else
                        version_str="b";
#endif
                }
#ifdef CYGPKG_HAL_NIOS2
                else if (strcmp("fpga", str) == 0)
                {

                        /* return a list of 32 bit integers to describe the expected
                         * and actual FPGA
                         */
                        static char *fpga_id = "0x12345678 0x12345678 0x12345678 0x12345678";
                        cyg_uint32 id, timestamp;
                        HAL_READ_UINT32(SYSID_BASE, id);
                        HAL_READ_UINT32(SYSID_BASE+4, timestamp);
                        sprintf(fpga_id, "0x%08x 0x%08x 0x%08x 0x%08x", id, timestamp, SYSID_ID, SYSID_TIMESTAMP);
                        version_str = fpga_id;
                        if ((argc>2) && (strcmp("time", str2) == 0))
                        {
                            time_t last_mod = timestamp;
                            char * t = ctime (&last_mod) ;
                            t[strlen(t)-1] = 0;
                            version_str = t;
                        }
                }
#endif

                else
                {
                        return JIM_ERR;
                }
        }

        Jim_SetResult(interp, Jim_NewStringObj(interp, version_str, -1));

        return JIM_OK;
}


#ifdef CYGPKG_HAL_NIOS2
static int jim_zy1000_writefirmware(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
{
        if (argc != 2)
                return JIM_ERR;

        int length;
        int stat;
        const char *str = Jim_GetString(argv[1], &length);

        /* BUG!!!! skip header! */
        void *firmware_address=0x4000000;
        int firmware_length=0x100000;

        if (length>firmware_length)
                return JIM_ERR;

        void *err_addr;

    if ((stat = flash_erase((void *)firmware_address, firmware_length, (void **)&err_addr)) != 0)
    {
        return JIM_ERR;
    }

    if ((stat = flash_program(firmware_address, str, length, (void **)&err_addr)) != 0)
        return JIM_ERR;

    return JIM_OK;
}
#endif

static int
zylinjtag_Jim_Command_powerstatus(Jim_Interp *interp,
                                                                   int argc,
                Jim_Obj * const *argv)
{
        if (argc != 1)
        {
                Jim_WrongNumArgs(interp, 1, argv, "powerstatus");
                return JIM_ERR;
        }

        cyg_uint32 status;
        ZY1000_PEEK(ZY1000_JTAG_BASE + 0x10, status);

        Jim_SetResult(interp, Jim_NewIntObj(interp, (status&0x80) != 0));

        return JIM_OK;
}

int zy1000_register_commands(struct command_context *cmd_ctx)
{
        register_command(cmd_ctx, NULL, "power", handle_power_command, COMMAND_ANY,
                        "power <on/off> - turn power switch to target on/off. No arguments - print status.");

        Jim_CreateCommand(interp, "zy1000_version", jim_zy1000_version, NULL, NULL);


        Jim_CreateCommand(interp, "powerstatus", zylinjtag_Jim_Command_powerstatus, NULL, NULL);

#ifdef CYGPKG_HAL_NIOS2
        Jim_CreateCommand(interp, "updatezy1000firmware", jim_zy1000_writefirmware, NULL, NULL);
#endif


        return ERROR_OK;
}




int zy1000_init(void)
{
        LOG_USER("%s", ZYLIN_OPENOCD_VERSION);

        ZY1000_POKE(ZY1000_JTAG_BASE + 0x10, 0x30); // Turn on LED1 & LED2

        setPower(true); // on by default


         /* deassert resets. Important to avoid infinite loop waiting for SRST to deassert */
        zy1000_reset(0, 0);
        zy1000_speed(jtag_get_speed());

        return ERROR_OK;
}

int zy1000_quit(void)
{

        return ERROR_OK;
}



int interface_jtag_execute_queue(void)
{
        cyg_uint32 empty;

        waitIdle();
        ZY1000_PEEK(ZY1000_JTAG_BASE + 0x10, empty);
        /* clear JTAG error register */
        ZY1000_POKE(ZY1000_JTAG_BASE + 0x14, 0x400);

        if ((empty&0x400) != 0)
        {
                LOG_WARNING("RCLK timeout");
                /* the error is informative only as we don't want to break the firmware if there
                 * is a false positive.
                 */
//              return ERROR_FAIL;
        }
        return ERROR_OK;
}





static cyg_uint32 getShiftValue(void)
{
        cyg_uint32 value;
        waitIdle();
        ZY1000_PEEK(ZY1000_JTAG_BASE + 0xc, value);
        VERBOSE(LOG_INFO("getShiftValue %08x", value));
        return value;
}
#if 0
static cyg_uint32 getShiftValueFlip(void)
{
        cyg_uint32 value;
        waitIdle();
        ZY1000_PEEK(ZY1000_JTAG_BASE + 0x18, value);
        VERBOSE(LOG_INFO("getShiftValue %08x (flipped)", value));
        return value;
}
#endif

#if 0
static void shiftValueInnerFlip(const tap_state_t state, const tap_state_t endState, int repeat, cyg_uint32 value)
{
        VERBOSE(LOG_INFO("shiftValueInner %s %s %d %08x (flipped)", tap_state_name(state), tap_state_name(endState), repeat, value));
        cyg_uint32 a,b;
        a = state;
        b = endState;
        ZY1000_POKE(ZY1000_JTAG_BASE + 0xc, value);
        ZY1000_POKE(ZY1000_JTAG_BASE + 0x8, (1 << 15) | (repeat << 8) | (a << 4) | b);
        VERBOSE(getShiftValueFlip());
}
#endif

static void gotoEndState(tap_state_t end_state)
{
        setCurrentState(end_state);
}

static __inline void scanFields(int num_fields, const struct scan_field *fields, tap_state_t shiftState, int pause)
{
        int i;
        int j;
        int k;

        for (i = 0; i < num_fields; i++)
        {
                cyg_uint32 value;

                uint8_t *inBuffer = NULL;


                // figure out where to store the input data
                int num_bits = fields[i].num_bits;
                if (fields[i].in_value != NULL)
                {
                        inBuffer = fields[i].in_value;
                }

                // here we shuffle N bits out/in
                j = 0;
                while (j < num_bits)
                {
                        tap_state_t pause_state;
                        int l;
                        k = num_bits-j;
                        pause_state = (shiftState == TAP_DRSHIFT)?TAP_DRSHIFT:TAP_IRSHIFT;
                        if (k > 32)
                        {
                                k = 32;
                                /* we have more to shift out */
                        } else if (pause&&(i == num_fields-1))
                        {
                                /* this was the last to shift out this time */
                                pause_state = (shiftState==TAP_DRSHIFT)?TAP_DRPAUSE:TAP_IRPAUSE;
                        }

                        // we have (num_bits + 7)/8 bytes of bits to toggle out.
                        // bits are pushed out LSB to MSB
                        value = 0;
                        if (fields[i].out_value != NULL)
                        {
                                for (l = 0; l < k; l += 8)
                                {
                                        value|=fields[i].out_value[(j + l)/8]<<l;
                                }
                        }
                        /* mask away unused bits for easier debugging */
                        if (k < 32)
                        {
                                value&=~(((uint32_t)0xffffffff) << k);
                        } else
                        {
                                /* Shifting by >= 32 is not defined by the C standard
                                 * and will in fact shift by &0x1f bits on nios */
                        }

                        shiftValueInner(shiftState, pause_state, k, value);

                        if (inBuffer != NULL)
                        {
                                // data in, LSB to MSB
                                value = getShiftValue();
                                // we're shifting in data to MSB, shift data to be aligned for returning the value
                                value >>= 32-k;

                                for (l = 0; l < k; l += 8)
                                {
                                        inBuffer[(j + l)/8]=(value >> l)&0xff;
                                }
                        }
                        j += k;
                }
        }
}

int interface_jtag_add_ir_scan(int num_fields, const struct scan_field *fields, tap_state_t state)
{

        int j;
        int scan_size = 0;
        struct jtag_tap *tap, *nextTap;
        for (tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap = nextTap)
        {
                nextTap = jtag_tap_next_enabled(tap);
                int pause = (nextTap==NULL);

                int found = 0;

                scan_size = tap->ir_length;

                /* search the list */
                for (j = 0; j < num_fields; j++)
                {
                        if (tap == fields[j].tap)
                        {
                                found = 1;

                                scanFields(1, fields + j, TAP_IRSHIFT, pause);
                                /* update device information */
                                buf_cpy(fields[j].out_value, tap->cur_instr, scan_size);

                                tap->bypass = 0;
                                break;
                        }
                }

                if (!found)
                {
                        /* if a device isn't listed, set it to BYPASS */
                        uint8_t ones[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff};

                        struct scan_field tmp;
                        memset(&tmp, 0, sizeof(tmp));
                        tmp.out_value = ones;
                        tmp.num_bits = scan_size;
                        scanFields(1, &tmp, TAP_IRSHIFT, pause);
                        /* update device information */
                        buf_cpy(tmp.out_value, tap->cur_instr, scan_size);
                        tap->bypass = 1;
                }
        }
        gotoEndState(state);

        return ERROR_OK;
}





int interface_jtag_add_plain_ir_scan(int num_fields, const struct scan_field *fields, tap_state_t state)
{
        scanFields(num_fields, fields, TAP_IRSHIFT, 1);
        gotoEndState(state);

        return ERROR_OK;
}

int interface_jtag_add_dr_scan(int num_fields, const struct scan_field *fields, tap_state_t state)
{

        int j;
        struct jtag_tap *tap, *nextTap;
        for (tap = jtag_tap_next_enabled(NULL); tap!= NULL; tap = nextTap)
        {
                nextTap = jtag_tap_next_enabled(tap);
                int found = 0;
                int pause = (nextTap==NULL);

                for (j = 0; j < num_fields; j++)
                {
                        if (tap == fields[j].tap)
                        {
                                found = 1;

                                scanFields(1, fields+j, TAP_DRSHIFT, pause);
                        }
                }
                if (!found)
                {
                        struct scan_field tmp;
                        /* program the scan field to 1 bit length, and ignore it's value */
                        tmp.num_bits = 1;
                        tmp.out_value = NULL;
                        tmp.in_value = NULL;

                        scanFields(1, &tmp, TAP_DRSHIFT, pause);
                }
                else
                {
                }
        }
        gotoEndState(state);
        return ERROR_OK;
}

int interface_jtag_add_plain_dr_scan(int num_fields, const struct scan_field *fields, tap_state_t state)
{
        scanFields(num_fields, fields, TAP_DRSHIFT, 1);
        gotoEndState(state);
        return ERROR_OK;
}


int interface_jtag_add_tlr()
{
        setCurrentState(TAP_RESET);
        return ERROR_OK;
}




int interface_jtag_add_reset(int req_trst, int req_srst)
{
        zy1000_reset(req_trst, req_srst);
        return ERROR_OK;
}

static int zy1000_jtag_add_clocks(int num_cycles, tap_state_t state, tap_state_t clockstate)
{
        /* num_cycles can be 0 */
        setCurrentState(clockstate);

        /* execute num_cycles, 32 at the time. */
        int i;
        for (i = 0; i < num_cycles; i += 32)
        {
                int num;
                num = 32;
                if (num_cycles-i < num)
                {
                        num = num_cycles-i;
                }
                shiftValueInner(clockstate, clockstate, num, 0);
        }

#if !TEST_MANUAL()
        /* finish in end_state */
        setCurrentState(state);
#else
        tap_state_t t = TAP_IDLE;
        /* test manual drive code on any target */
        int tms;
        uint8_t tms_scan = tap_get_tms_path(t, state);
        int tms_count = tap_get_tms_path_len(tap_get_state(), tap_get_end_state());

        for (i = 0; i < tms_count; i++)
        {
                tms = (tms_scan >> i) & 1;
                waitIdle();
                ZY1000_POKE(ZY1000_JTAG_BASE + 0x28,  tms);
        }
        waitIdle();
        ZY1000_POKE(ZY1000_JTAG_BASE + 0x20, state);
#endif


        return ERROR_OK;
}

int interface_jtag_add_runtest(int num_cycles, tap_state_t state)
{
        return zy1000_jtag_add_clocks(num_cycles, state, TAP_IDLE);
}

int interface_jtag_add_clocks(int num_cycles)
{
        return zy1000_jtag_add_clocks(num_cycles, cmd_queue_cur_state, cmd_queue_cur_state);
}

int interface_jtag_add_sleep(uint32_t us)
{
        jtag_sleep(us);
        return ERROR_OK;
}

int interface_jtag_add_pathmove(int num_states, const tap_state_t *path)
{
        int state_count;
        int tms = 0;

        /*wait for the fifo to be empty*/
        waitIdle();

        state_count = 0;

        tap_state_t cur_state = cmd_queue_cur_state;

        while (num_states)
        {
                if (tap_state_transition(cur_state, false) == path[state_count])
                {
                        tms = 0;
                }
                else if (tap_state_transition(cur_state, true) == path[state_count])
                {
                        tms = 1;
                }
                else
                {
                        LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_name(cur_state), tap_state_name(path[state_count]));
                        exit(-1);
                }

                waitIdle();
                ZY1000_POKE(ZY1000_JTAG_BASE + 0x28,  tms);

                cur_state = path[state_count];
                state_count++;
                num_states--;
        }

        waitIdle();
        ZY1000_POKE(ZY1000_JTAG_BASE + 0x20,  cur_state);
        return ERROR_OK;
}



void embeddedice_write_dcc(struct jtag_tap *tap, int reg_addr, uint8_t *buffer, int little, int count)
{
//      static int const reg_addr = 0x5;
        tap_state_t end_state = jtag_get_end_state();
        if (jtag_tap_next_enabled(jtag_tap_next_enabled(NULL)) == NULL)
        {
                /* better performance via code duplication */
                if (little)
                {
                        int i;
                        for (i = 0; i < count; i++)
                        {
                                shiftValueInner(TAP_DRSHIFT, TAP_DRSHIFT, 32, fast_target_buffer_get_u32(buffer, 1));
                                shiftValueInner(TAP_DRSHIFT, end_state, 6, reg_addr | (1 << 5));
                                buffer += 4;
                        }
                } else
                {
                        int i;
                        for (i = 0; i < count; i++)
                        {
                                shiftValueInner(TAP_DRSHIFT, TAP_DRSHIFT, 32, fast_target_buffer_get_u32(buffer, 0));
                                shiftValueInner(TAP_DRSHIFT, end_state, 6, reg_addr | (1 << 5));
                                buffer += 4;
                        }
                }
        }
        else
        {
                int i;
                for (i = 0; i < count; i++)
                {
                        embeddedice_write_reg_inner(tap, reg_addr, fast_target_buffer_get_u32(buffer, little));
                        buffer += 4;
                }
        }
}