1 /***************************************************************************
2 * Copyright (C) 2007-2010 by Øyvind Harboe *
4 * This program is free software; you can redistribute it and/or modify *
5 * it under the terms of the GNU General Public License as published by *
6 * the Free Software Foundation; either version 2 of the License, or *
7 * (at your option) any later version. *
9 * This program is distributed in the hope that it will be useful, *
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
12 * GNU General Public License for more details. *
14 * You should have received a copy of the GNU General Public License *
15 * along with this program; if not, write to the *
16 * Free Software Foundation, Inc., *
17 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
18 ***************************************************************************/
20 /* This file supports the zy1000 debugger: http://www.zylin.com/zy1000.html
22 * The zy1000 is a standalone debugger that has a web interface and
23 * requires no drivers on the developer host as all communication
24 * is via TCP/IP. The zy1000 gets it performance(~400-700kBytes/s
25 * DCC downloads @ 16MHz target) as it has an FPGA to hardware
26 * accelerate the JTAG commands, while offering *very* low latency
27 * between OpenOCD and the FPGA registers.
29 * The disadvantage of the zy1000 is that it has a feeble CPU compared to
30 * a PC(ca. 50-500 DMIPS depending on how one counts it), whereas a PC
31 * is on the order of 10000 DMIPS(i.e. at a factor of 20-200).
33 * The zy1000 revc hardware is using an Altera Nios CPU, whereas the
34 * revb is using ARM7 + Xilinx.
36 * See Zylin web pages or contact Zylin for more information.
38 * The reason this code is in OpenOCD rather than OpenOCD linked with the
39 * ZY1000 code is that OpenOCD is the long road towards getting
40 * libopenocd into place. libopenocd will support both low performance,
41 * low latency systems(embedded) and high performance high latency
48 #include <target/embeddedice.h>
49 #include <jtag/minidriver.h>
50 #include <jtag/interface.h>
52 #include <helper/time_support.h>
54 #include <netinet/tcp.h>
57 #include "zy1000_version.h"
59 #include <cyg/hal/hal_io.h> // low level i/o
60 #include <cyg/hal/hal_diag.h>
62 #ifdef CYGPKG_HAL_NIOS2
63 #include <cyg/hal/io.h>
64 #include <cyg/firmwareutil/firmwareutil.h>
65 #define ZYLIN_KHZ 60000
67 #define ZYLIN_KHZ 64000
70 #define ZYLIN_VERSION GIT_ZY1000_VERSION
71 #define ZYLIN_DATE __DATE__
72 #define ZYLIN_TIME __TIME__
73 #define ZYLIN_OPENOCD GIT_OPENOCD_VERSION
74 #define ZYLIN_OPENOCD_VERSION "ZY1000 " ZYLIN_VERSION " " ZYLIN_DATE
77 /* Assume we're connecting to a revc w/60MHz clock. */
78 #define ZYLIN_KHZ 60000
82 /* The software needs to check if it's in RCLK mode or not */
83 static bool zy1000_rclk
= false;
85 static int zy1000_khz(int khz
, int *jtag_speed
)
94 /* Round speed up to nearest divisor.
97 * (64000 + 15999) / 16000 = 4
104 * (64000 + 15998) / 15999 = 5
111 speed
= (ZYLIN_KHZ
+ (khz
-1)) / khz
;
112 speed
= (speed
+ 1 ) / 2;
116 /* maximum dividend */
124 static int zy1000_speed_div(int speed
, int *khz
)
132 *khz
= ZYLIN_KHZ
/ speed
;
138 static bool readPowerDropout(void)
141 // sample and clear power dropout
142 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x10, 0x80);
143 ZY1000_PEEK(ZY1000_JTAG_BASE
+ 0x10, state
);
145 powerDropout
= (state
& 0x80) != 0;
150 static bool readSRST(void)
153 // sample and clear SRST sensing
154 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x10, 0x00000040);
155 ZY1000_PEEK(ZY1000_JTAG_BASE
+ 0x10, state
);
157 srstAsserted
= (state
& 0x40) != 0;
161 static int zy1000_srst_asserted(int *srst_asserted
)
163 *srst_asserted
= readSRST();
167 static int zy1000_power_dropout(int *dropout
)
169 *dropout
= readPowerDropout();
173 void zy1000_reset(int trst
, int srst
)
175 LOG_DEBUG("zy1000 trst=%d, srst=%d", trst
, srst
);
177 /* flush the JTAG FIFO. Not flushing the queue before messing with
178 * reset has such interesting bugs as causing hard to reproduce
179 * RCLK bugs as RCLK will stop responding when TRST is asserted
185 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x14, 0x00000001);
189 /* Danger!!! if clk != 0 when in
190 * idle in TAP_IDLE, reset halt on str912 will fail.
192 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x10, 0x00000001);
197 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x14, 0x00000002);
202 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x10, 0x00000002);
205 if (trst
||(srst
&& (jtag_get_reset_config() & RESET_SRST_PULLS_TRST
)))
207 /* we're now in the RESET state until trst is deasserted */
208 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x20, TAP_RESET
);
211 /* We'll get RCLK failure when we assert TRST, so clear any false positives here */
212 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x14, 0x400);
215 /* wait for srst to float back up */
216 if ((!srst
&& ((jtag_get_reset_config() & RESET_TRST_PULLS_SRST
) == 0))||
217 (!srst
&& !trst
&& (jtag_get_reset_config() & RESET_TRST_PULLS_SRST
)))
224 // We don't want to sense our own reset, so we clear here.
225 // There is of course a timing hole where we could loose
231 LOG_USER("SRST took %dms to deassert", (int)total
);
239 start
= timeval_ms();
242 total
= timeval_ms() - start
;
248 LOG_ERROR("SRST took too long to deassert: %dms", (int)total
);
256 int zy1000_speed(int speed
)
258 /* flush JTAG master FIFO before setting speed */
266 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x10, 0x100);
268 LOG_DEBUG("jtag_speed using RCLK");
272 if (speed
> 8190 || speed
< 2)
274 LOG_USER("valid ZY1000 jtag_speed=[8190,2]. With divisor is %dkHz / even values between 8190-2, i.e. min %dHz, max %dMHz",
275 ZYLIN_KHZ
, (ZYLIN_KHZ
* 1000) / 8190, ZYLIN_KHZ
/ (2 * 1000));
276 return ERROR_INVALID_ARGUMENTS
;
281 zy1000_speed_div(speed
, &khz
);
282 LOG_USER("jtag_speed %d => JTAG clk=%d kHz", speed
, khz
);
283 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x14, 0x100);
284 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x1c, speed
);
289 static bool savePower
;
292 static void setPower(bool power
)
297 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x14, 0x8);
300 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x10, 0x8);
304 COMMAND_HANDLER(handle_power_command
)
310 COMMAND_PARSE_ON_OFF(CMD_ARGV
[0], enable
);
315 LOG_INFO("Target power %s", savePower
? "on" : "off");
318 return ERROR_INVALID_ARGUMENTS
;
325 static char *tcp_server
= "notspecified";
326 static int jim_zy1000_server(Jim_Interp
*interp
, int argc
, Jim_Obj
*const *argv
)
331 tcp_server
= strdup(Jim_GetString(argv
[1], NULL
));
338 /* Give TELNET a way to find out what version this is */
339 static int jim_zy1000_version(Jim_Interp
*interp
, int argc
, Jim_Obj
*const *argv
)
341 if ((argc
< 1) || (argc
> 3))
343 const char *version_str
= NULL
;
347 version_str
= ZYLIN_OPENOCD_VERSION
;
350 const char *str
= Jim_GetString(argv
[1], NULL
);
351 const char *str2
= NULL
;
353 str2
= Jim_GetString(argv
[2], NULL
);
354 if (strcmp("openocd", str
) == 0)
356 version_str
= ZYLIN_OPENOCD
;
358 else if (strcmp("zy1000", str
) == 0)
360 version_str
= ZYLIN_VERSION
;
362 else if (strcmp("date", str
) == 0)
364 version_str
= ZYLIN_DATE
;
366 else if (strcmp("time", str
) == 0)
368 version_str
= ZYLIN_TIME
;
370 else if (strcmp("pcb", str
) == 0)
372 #ifdef CYGPKG_HAL_NIOS2
378 #ifdef CYGPKG_HAL_NIOS2
379 else if (strcmp("fpga", str
) == 0)
382 /* return a list of 32 bit integers to describe the expected
385 static char *fpga_id
= "0x12345678 0x12345678 0x12345678 0x12345678";
386 uint32_t id
, timestamp
;
387 HAL_READ_UINT32(SYSID_BASE
, id
);
388 HAL_READ_UINT32(SYSID_BASE
+4, timestamp
);
389 sprintf(fpga_id
, "0x%08x 0x%08x 0x%08x 0x%08x", id
, timestamp
, SYSID_ID
, SYSID_TIMESTAMP
);
390 version_str
= fpga_id
;
391 if ((argc
>2) && (strcmp("time", str2
) == 0))
393 time_t last_mod
= timestamp
;
394 char * t
= ctime (&last_mod
) ;
407 Jim_SetResult(interp
, Jim_NewStringObj(interp
, version_str
, -1));
413 #ifdef CYGPKG_HAL_NIOS2
419 struct cyg_upgrade_info
*upgraded_file
;
422 static void report_info(void *data
, const char * format
, va_list args
)
424 char *s
= alloc_vprintf(format
, args
);
429 struct cyg_upgrade_info firmware_info
=
431 (uint8_t *)0x84000000,
437 "ZylinNiosFirmware\n",
441 static int jim_zy1000_writefirmware(Jim_Interp
*interp
, int argc
, Jim_Obj
*const *argv
)
447 const char *str
= Jim_GetString(argv
[1], &length
);
451 if ((tmpFile
= open(firmware_info
.file
, O_RDWR
| O_CREAT
| O_TRUNC
)) <= 0)
456 success
= write(tmpFile
, str
, length
) == length
;
461 if (!cyg_firmware_upgrade(NULL
, firmware_info
))
469 zylinjtag_Jim_Command_powerstatus(Jim_Interp
*interp
,
471 Jim_Obj
* const *argv
)
475 Jim_WrongNumArgs(interp
, 1, argv
, "powerstatus");
479 bool dropout
= readPowerDropout();
481 Jim_SetResult(interp
, Jim_NewIntObj(interp
, dropout
));
488 int zy1000_quit(void)
496 int interface_jtag_execute_queue(void)
502 /* We must make sure to write data read back to memory location before we return
505 zy1000_flush_readqueue();
507 /* and handle any callbacks... */
508 zy1000_flush_callbackqueue();
512 /* Only check for errors when using RCLK to speed up
515 ZY1000_PEEK(ZY1000_JTAG_BASE
+ 0x10, empty
);
516 /* clear JTAG error register */
517 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x14, 0x400);
519 if ((empty
&0x400) != 0)
521 LOG_WARNING("RCLK timeout");
522 /* the error is informative only as we don't want to break the firmware if there
523 * is a false positive.
525 // return ERROR_FAIL;
534 static void writeShiftValue(uint8_t *data
, int bits
);
536 // here we shuffle N bits out/in
537 static __inline
void scanBits(const uint8_t *out_value
, uint8_t *in_value
, int num_bits
, bool pause_now
, tap_state_t shiftState
, tap_state_t end_state
)
539 tap_state_t pause_state
= shiftState
;
540 for (int j
= 0; j
< num_bits
; j
+= 32)
542 int k
= num_bits
- j
;
546 /* we have more to shift out */
547 } else if (pause_now
)
549 /* this was the last to shift out this time */
550 pause_state
= end_state
;
553 // we have (num_bits + 7)/8 bytes of bits to toggle out.
554 // bits are pushed out LSB to MSB
557 if (out_value
!= NULL
)
559 for (int l
= 0; l
< k
; l
+= 8)
561 value
|=out_value
[(j
+ l
)/8]<<l
;
564 /* mask away unused bits for easier debugging */
567 value
&=~(((uint32_t)0xffffffff) << k
);
570 /* Shifting by >= 32 is not defined by the C standard
571 * and will in fact shift by &0x1f bits on nios */
574 shiftValueInner(shiftState
, pause_state
, k
, value
);
576 if (in_value
!= NULL
)
578 writeShiftValue(in_value
+ (j
/8), k
);
583 static __inline
void scanFields(int num_fields
, const struct scan_field
*fields
, tap_state_t shiftState
, tap_state_t end_state
)
585 for (int i
= 0; i
< num_fields
; i
++)
587 scanBits(fields
[i
].out_value
,
596 int interface_jtag_add_ir_scan(struct jtag_tap
*active
, const struct scan_field
*fields
, tap_state_t state
)
599 struct jtag_tap
*tap
, *nextTap
;
600 tap_state_t pause_state
= TAP_IRSHIFT
;
602 for (tap
= jtag_tap_next_enabled(NULL
); tap
!= NULL
; tap
= nextTap
)
604 nextTap
= jtag_tap_next_enabled(tap
);
609 scan_size
= tap
->ir_length
;
611 /* search the list */
614 scanFields(1, fields
, TAP_IRSHIFT
, pause_state
);
615 /* update device information */
616 buf_cpy(fields
[0].out_value
, tap
->cur_instr
, scan_size
);
621 /* if a device isn't listed, set it to BYPASS */
622 assert(scan_size
<= 32);
623 shiftValueInner(TAP_IRSHIFT
, pause_state
, scan_size
, 0xffffffff);
636 int interface_jtag_add_plain_ir_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
, tap_state_t state
)
638 scanBits(out_bits
, in_bits
, num_bits
, true, TAP_IRSHIFT
, state
);
642 int interface_jtag_add_dr_scan(struct jtag_tap
*active
, int num_fields
, const struct scan_field
*fields
, tap_state_t state
)
644 struct jtag_tap
*tap
, *nextTap
;
645 tap_state_t pause_state
= TAP_DRSHIFT
;
646 for (tap
= jtag_tap_next_enabled(NULL
); tap
!= NULL
; tap
= nextTap
)
648 nextTap
= jtag_tap_next_enabled(tap
);
654 /* Find a range of fields to write to this tap */
657 assert(!tap
->bypass
);
659 scanFields(num_fields
, fields
, TAP_DRSHIFT
, pause_state
);
662 /* Shift out a 0 for disabled tap's */
664 shiftValueInner(TAP_DRSHIFT
, pause_state
, 1, 0);
670 int interface_jtag_add_plain_dr_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
, tap_state_t state
)
672 scanBits(out_bits
, in_bits
, num_bits
, true, TAP_DRSHIFT
, state
);
676 int interface_jtag_add_tlr()
678 setCurrentState(TAP_RESET
);
683 int interface_jtag_add_reset(int req_trst
, int req_srst
)
685 zy1000_reset(req_trst
, req_srst
);
689 static int zy1000_jtag_add_clocks(int num_cycles
, tap_state_t state
, tap_state_t clockstate
)
691 /* num_cycles can be 0 */
692 setCurrentState(clockstate
);
694 /* execute num_cycles, 32 at the time. */
696 for (i
= 0; i
< num_cycles
; i
+= 32)
700 if (num_cycles
-i
< num
)
704 shiftValueInner(clockstate
, clockstate
, num
, 0);
708 /* finish in end_state */
709 setCurrentState(state
);
711 tap_state_t t
= TAP_IDLE
;
712 /* test manual drive code on any target */
714 uint8_t tms_scan
= tap_get_tms_path(t
, state
);
715 int tms_count
= tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
717 for (i
= 0; i
< tms_count
; i
++)
719 tms
= (tms_scan
>> i
) & 1;
721 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, tms
);
724 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x20, state
);
730 int interface_jtag_add_runtest(int num_cycles
, tap_state_t state
)
732 return zy1000_jtag_add_clocks(num_cycles
, state
, TAP_IDLE
);
735 int interface_jtag_add_clocks(int num_cycles
)
737 return zy1000_jtag_add_clocks(num_cycles
, cmd_queue_cur_state
, cmd_queue_cur_state
);
740 int interface_add_tms_seq(unsigned num_bits
, const uint8_t *seq
, enum tap_state state
)
742 /*wait for the fifo to be empty*/
745 for (unsigned i
= 0; i
< num_bits
; i
++)
749 if (((seq
[i
/8] >> (i
% 8)) & 1) == 0)
759 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, tms
);
763 if (state
!= TAP_INVALID
)
765 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x20, state
);
768 /* this would be normal if we are switching to SWD mode */
773 int interface_jtag_add_pathmove(int num_states
, const tap_state_t
*path
)
780 tap_state_t cur_state
= cmd_queue_cur_state
;
783 memset(seq
, 0, sizeof(seq
));
784 assert(num_states
< (int)((sizeof(seq
) * 8)));
788 if (tap_state_transition(cur_state
, false) == path
[state_count
])
792 else if (tap_state_transition(cur_state
, true) == path
[state_count
])
798 LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_name(cur_state
), tap_state_name(path
[state_count
]));
802 seq
[state_count
/8] = seq
[state_count
/8] | (tms
<< (state_count
% 8));
804 cur_state
= path
[state_count
];
809 return interface_add_tms_seq(state_count
, seq
, cur_state
);
812 static void jtag_pre_post_bits(struct jtag_tap
*tap
, int *pre
, int *post
)
814 /* bypass bits before and after */
819 struct jtag_tap
*cur_tap
, *nextTap
;
820 for (cur_tap
= jtag_tap_next_enabled(NULL
); cur_tap
!= NULL
; cur_tap
= nextTap
)
822 nextTap
= jtag_tap_next_enabled(cur_tap
);
842 static const int embeddedice_num_bits[] = {32, 6};
846 values[1] = (1 << 5) | reg_addr;
850 embeddedice_num_bits,
855 void embeddedice_write_dcc(struct jtag_tap
*tap
, int reg_addr
, uint8_t *buffer
, int little
, int count
)
859 for (i
= 0; i
< count
; i
++)
861 embeddedice_write_reg_inner(tap
, reg_addr
, fast_target_buffer_get_u32(buffer
, little
));
867 jtag_pre_post_bits(tap
, &pre_bits
, &post_bits
);
869 if ((pre_bits
> 32) || (post_bits
+ 6 > 32))
872 for (i
= 0; i
< count
; i
++)
874 embeddedice_write_reg_inner(tap
, reg_addr
, fast_target_buffer_get_u32(buffer
, little
));
880 for (i
= 0; i
< count
; i
++)
882 /* Fewer pokes means we get to use the FIFO more efficiently */
883 shiftValueInner(TAP_DRSHIFT
, TAP_DRSHIFT
, pre_bits
, 0);
884 shiftValueInner(TAP_DRSHIFT
, TAP_DRSHIFT
, 32, fast_target_buffer_get_u32(buffer
, little
));
885 /* Danger! here we need to exit into the TAP_IDLE state to make
886 * DCC pick up this value.
888 shiftValueInner(TAP_DRSHIFT
, TAP_IDLE
, 6 + post_bits
, (reg_addr
| (1 << 5)));
897 int arm11_run_instr_data_to_core_noack_inner(struct jtag_tap
* tap
, uint32_t opcode
, uint32_t * data
, size_t count
)
899 /* bypass bits before and after */
902 jtag_pre_post_bits(tap
, &pre_bits
, &post_bits
);
905 if ((pre_bits
> 32) || (post_bits
> 32))
907 int arm11_run_instr_data_to_core_noack_inner_default(struct jtag_tap
*, uint32_t, uint32_t *, size_t);
908 return arm11_run_instr_data_to_core_noack_inner_default(tap
, opcode
, data
, count
);
911 static const int bits
[] = {32, 2};
912 uint32_t values
[] = {0, 0};
914 /* FIX!!!!!! the target_write_memory() API started this nasty problem
915 * with unaligned uint32_t * pointers... */
916 const uint8_t *t
= (const uint8_t *)data
;
921 /* Danger! This code doesn't update cmd_queue_cur_state, so
922 * invoking jtag_add_pathmove() before jtag_add_dr_out() after
923 * this loop would fail!
925 shiftValueInner(TAP_DRSHIFT
, TAP_DRSHIFT
, pre_bits
, 0);
933 shiftValueInner(TAP_DRSHIFT
, TAP_DRSHIFT
, 32, value
);
935 shiftValueInner(TAP_DRSHIFT
, TAP_DRPAUSE
, post_bits
, 0);
937 /* copy & paste from arm11_dbgtap.c */
938 //TAP_DREXIT2, TAP_DRUPDATE, TAP_IDLE, TAP_IDLE, TAP_IDLE, TAP_DRSELECT, TAP_DRCAPTURE, TAP_DRSHIFT
939 /* KLUDGE! we have to flush the fifo or the Nios CPU locks up.
940 * This is probably a bug in the Avalon bus(cross clocking bridge?)
941 * or in the jtag registers module.
944 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, 1);
945 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, 1);
946 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, 0);
947 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, 0);
948 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, 0);
949 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, 1);
950 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, 0);
951 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x28, 0);
952 /* we don't have to wait for the queue to empty here */
953 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x20, TAP_DRSHIFT
);
956 static const tap_state_t arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay
[] =
958 TAP_DREXIT2
, TAP_DRUPDATE
, TAP_IDLE
, TAP_IDLE
, TAP_IDLE
, TAP_DRSELECT
, TAP_DRCAPTURE
, TAP_DRSHIFT
962 values
[0] |= (*t
++<<8);
963 values
[0] |= (*t
++<<16);
964 values
[0] |= (*t
++<<24);
972 jtag_add_pathmove(ARRAY_SIZE(arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay
),
973 arm11_MOVE_DRPAUSE_IDLE_DRPAUSE_with_delay
);
978 values
[0] |= (*t
++<<8);
979 values
[0] |= (*t
++<<16);
980 values
[0] |= (*t
++<<24);
982 /* This will happen on the last iteration updating cmd_queue_cur_state
983 * so we don't have to track it during the common code path
991 return jtag_execute_queue();
996 static const struct command_registration zy1000_commands
[] = {
999 .handler
= handle_power_command
,
1000 .mode
= COMMAND_ANY
,
1001 .help
= "Turn power switch to target on/off. "
1002 "With no arguments, prints status.",
1003 .usage
= "('on'|'off)",
1007 .name
= "zy1000_version",
1008 .mode
= COMMAND_ANY
,
1009 .jim_handler
= jim_zy1000_version
,
1010 .help
= "Print version info for zy1000.",
1011 .usage
= "['openocd'|'zy1000'|'date'|'time'|'pcb'|'fpga']",
1015 .name
= "zy1000_server",
1016 .mode
= COMMAND_ANY
,
1017 .jim_handler
= jim_zy1000_server
,
1018 .help
= "Tcpip address for ZY1000 server.",
1023 .name
= "powerstatus",
1024 .mode
= COMMAND_ANY
,
1025 .jim_handler
= zylinjtag_Jim_Command_powerstatus
,
1026 .help
= "Returns power status of target",
1028 #ifdef CYGPKG_HAL_NIOS2
1030 .name
= "updatezy1000firmware",
1031 .mode
= COMMAND_ANY
,
1032 .jim_handler
= jim_zy1000_writefirmware
,
1033 .help
= "writes firmware to flash",
1034 /* .usage = "some_string", */
1037 COMMAND_REGISTRATION_DONE
1041 static int tcp_ip
= -1;
1043 /* Write large packets if we can */
1044 static size_t out_pos
;
1045 static uint8_t out_buffer
[16384];
1046 static size_t in_pos
;
1047 static size_t in_write
;
1048 static uint8_t in_buffer
[16384];
1050 static bool flush_writes(void)
1052 bool ok
= (write(tcp_ip
, out_buffer
, out_pos
) == (int)out_pos
);
1057 static bool writeLong(uint32_t l
)
1060 for (i
= 0; i
< 4; i
++)
1062 uint8_t c
= (l
>> (i
*8))&0xff;
1063 out_buffer
[out_pos
++] = c
;
1064 if (out_pos
>= sizeof(out_buffer
))
1066 if (!flush_writes())
1075 static bool readLong(uint32_t *out_data
)
1079 if (!flush_writes())
1087 for (i
= 0; i
< 4; i
++)
1090 if (in_pos
== in_write
)
1094 t
= read(tcp_ip
, in_buffer
, sizeof(in_buffer
));
1099 in_write
= (size_t) t
;
1102 c
= in_buffer
[in_pos
++];
1104 data
|= (c
<< (i
*8));
1112 ZY1000_CMD_POKE
= 0x0,
1113 ZY1000_CMD_PEEK
= 0x8,
1114 ZY1000_CMD_SLEEP
= 0x1,
1115 ZY1000_CMD_WAITIDLE
= 2
1119 #if !BUILD_ECOSBOARD
1121 #include <sys/socket.h> /* for socket(), connect(), send(), and recv() */
1122 #include <arpa/inet.h> /* for sockaddr_in and inet_addr() */
1124 /* We initialize this late since we need to know the server address
1127 static void tcpip_open(void)
1132 struct sockaddr_in echoServAddr
; /* Echo server address */
1134 /* Create a reliable, stream socket using TCP */
1135 if ((tcp_ip
= socket(PF_INET
, SOCK_STREAM
, IPPROTO_TCP
)) < 0)
1137 fprintf(stderr
, "Failed to connect to zy1000 server\n");
1141 /* Construct the server address structure */
1142 memset(&echoServAddr
, 0, sizeof(echoServAddr
)); /* Zero out structure */
1143 echoServAddr
.sin_family
= AF_INET
; /* Internet address family */
1144 echoServAddr
.sin_addr
.s_addr
= inet_addr(tcp_server
); /* Server IP address */
1145 echoServAddr
.sin_port
= htons(7777); /* Server port */
1147 /* Establish the connection to the echo server */
1148 if (connect(tcp_ip
, (struct sockaddr
*) &echoServAddr
, sizeof(echoServAddr
)) < 0)
1150 fprintf(stderr
, "Failed to connect to zy1000 server\n");
1155 setsockopt(tcp_ip
, /* socket affected */
1156 IPPROTO_TCP
, /* set option at TCP level */
1157 TCP_NODELAY
, /* name of option */
1158 (char *)&flag
, /* the cast is historical cruft */
1159 sizeof(int)); /* length of option value */
1165 void zy1000_tcpout(uint32_t address
, uint32_t data
)
1168 if (!writeLong((ZY1000_CMD_POKE
<< 24) | address
)||
1171 fprintf(stderr
, "Could not write to zy1000 server\n");
1176 /* By sending the wait to the server, we avoid a readback
1177 * of status. Radically improves performance for this operation
1178 * with long ping times.
1183 if (!writeLong((ZY1000_CMD_WAITIDLE
<< 24)))
1185 fprintf(stderr
, "Could not write to zy1000 server\n");
1190 uint32_t zy1000_tcpin(uint32_t address
)
1194 zy1000_flush_readqueue();
1197 if (!writeLong((ZY1000_CMD_PEEK
<< 24) | address
)||
1200 fprintf(stderr
, "Could not read from zy1000 server\n");
1206 int interface_jtag_add_sleep(uint32_t us
)
1209 if (!writeLong((ZY1000_CMD_SLEEP
<< 24))||
1212 fprintf(stderr
, "Could not read from zy1000 server\n");
1218 /* queue a readback */
1219 #define readqueue_size 16384
1224 } readqueue
[readqueue_size
];
1226 static int readqueue_pos
= 0;
1228 /* flush the readqueue, this means reading any data that
1229 * we're expecting and store them into the final position
1231 void zy1000_flush_readqueue(void)
1233 if (readqueue_pos
== 0)
1235 /* simply debugging by allowing easy breakpoints when there
1236 * is something to do. */
1241 for (i
= 0; i
< readqueue_pos
; i
++)
1244 if (!readLong(&value
))
1246 fprintf(stderr
, "Could not read from zy1000 server\n");
1250 uint8_t *in_value
= readqueue
[i
].dest
;
1251 int k
= readqueue
[i
].bits
;
1253 // we're shifting in data to MSB, shift data to be aligned for returning the value
1256 for (int l
= 0; l
< k
; l
+= 8)
1258 in_value
[l
/8]=(value
>> l
)&0xff;
1264 /* By queuing the callback's we avoid flushing the
1265 read queue until jtag_execute_queue(). This can
1266 reduce latency dramatically for cases where
1267 callbacks are used extensively.
1269 #define callbackqueue_size 128
1270 static struct callbackentry
1272 jtag_callback_t callback
;
1273 jtag_callback_data_t data0
;
1274 jtag_callback_data_t data1
;
1275 jtag_callback_data_t data2
;
1276 jtag_callback_data_t data3
;
1277 } callbackqueue
[callbackqueue_size
];
1279 static int callbackqueue_pos
= 0;
1281 void zy1000_jtag_add_callback4(jtag_callback_t callback
, jtag_callback_data_t data0
, jtag_callback_data_t data1
, jtag_callback_data_t data2
, jtag_callback_data_t data3
)
1283 if (callbackqueue_pos
>= callbackqueue_size
)
1285 zy1000_flush_callbackqueue();
1288 callbackqueue
[callbackqueue_pos
].callback
= callback
;
1289 callbackqueue
[callbackqueue_pos
].data0
= data0
;
1290 callbackqueue
[callbackqueue_pos
].data1
= data1
;
1291 callbackqueue
[callbackqueue_pos
].data2
= data2
;
1292 callbackqueue
[callbackqueue_pos
].data3
= data3
;
1293 callbackqueue_pos
++;
1296 static int zy1000_jtag_convert_to_callback4(jtag_callback_data_t data0
, jtag_callback_data_t data1
, jtag_callback_data_t data2
, jtag_callback_data_t data3
)
1298 ((jtag_callback1_t
)data1
)(data0
);
1302 void zy1000_jtag_add_callback(jtag_callback1_t callback
, jtag_callback_data_t data0
)
1304 zy1000_jtag_add_callback4(zy1000_jtag_convert_to_callback4
, data0
, (jtag_callback_data_t
)callback
, 0, 0);
1307 void zy1000_flush_callbackqueue(void)
1309 /* we have to flush the read queue so we have access to
1310 the data the callbacks will use
1312 zy1000_flush_readqueue();
1314 for (i
= 0; i
< callbackqueue_pos
; i
++)
1316 struct callbackentry
*entry
= &callbackqueue
[i
];
1317 jtag_set_error(entry
->callback(entry
->data0
, entry
->data1
, entry
->data2
, entry
->data3
));
1319 callbackqueue_pos
= 0;
1322 static void writeShiftValue(uint8_t *data
, int bits
)
1326 if (!writeLong((ZY1000_CMD_PEEK
<< 24) | (ZY1000_JTAG_BASE
+ 0xc)))
1328 fprintf(stderr
, "Could not read from zy1000 server\n");
1332 if (readqueue_pos
>= readqueue_size
)
1334 zy1000_flush_readqueue();
1337 readqueue
[readqueue_pos
].dest
= data
;
1338 readqueue
[readqueue_pos
].bits
= bits
;
1344 static void writeShiftValue(uint8_t *data
, int bits
)
1348 ZY1000_PEEK(ZY1000_JTAG_BASE
+ 0xc, value
);
1349 VERBOSE(LOG_INFO("getShiftValue %08x", value
));
1351 // data in, LSB to MSB
1352 // we're shifting in data to MSB, shift data to be aligned for returning the value
1353 value
>>= 32 - bits
;
1355 for (int l
= 0; l
< bits
; l
+= 8)
1357 data
[l
/8]=(value
>> l
)&0xff;
1364 static char tcpip_stack
[2048];
1365 static cyg_thread tcpip_thread_object
;
1366 static cyg_handle_t tcpip_thread_handle
;
1368 static char watchdog_stack
[2048];
1369 static cyg_thread watchdog_thread_object
;
1370 static cyg_handle_t watchdog_thread_handle
;
1372 /* Infinite loop peeking & poking */
1373 static void tcpipserver(void)
1378 if (!readLong(&address
))
1380 enum ZY1000_CMD c
= (address
>> 24) & 0xff;
1381 address
&= 0xffffff;
1384 case ZY1000_CMD_POKE
:
1387 if (!readLong(&data
))
1389 address
&= ~0x80000000;
1390 ZY1000_POKE(address
+ ZY1000_JTAG_BASE
, data
);
1393 case ZY1000_CMD_PEEK
:
1396 ZY1000_PEEK(address
+ ZY1000_JTAG_BASE
, data
);
1397 if (!writeLong(data
))
1401 case ZY1000_CMD_SLEEP
:
1404 if (!readLong(&data
))
1409 case ZY1000_CMD_WAITIDLE
:
1421 static void tcpip_server(cyg_addrword_t data
)
1423 int so_reuseaddr_option
= 1;
1426 if ((fd
= socket(AF_INET
, SOCK_STREAM
, 0)) == -1)
1428 LOG_ERROR("error creating socket: %s", strerror(errno
));
1432 setsockopt(fd
, SOL_SOCKET
, SO_REUSEADDR
, (void*) &so_reuseaddr_option
,
1435 struct sockaddr_in sin
;
1436 unsigned int address_size
;
1437 address_size
= sizeof(sin
);
1438 memset(&sin
, 0, sizeof(sin
));
1439 sin
.sin_family
= AF_INET
;
1440 sin
.sin_addr
.s_addr
= INADDR_ANY
;
1441 sin
.sin_port
= htons(7777);
1443 if (bind(fd
, (struct sockaddr
*) &sin
, sizeof(sin
)) == -1)
1445 LOG_ERROR("couldn't bind to socket: %s", strerror(errno
));
1449 if (listen(fd
, 1) == -1)
1451 LOG_ERROR("couldn't listen on socket: %s", strerror(errno
));
1458 tcp_ip
= accept(fd
, (struct sockaddr
*) &sin
, &address_size
);
1465 setsockopt(tcp_ip
, /* socket affected */
1466 IPPROTO_TCP
, /* set option at TCP level */
1467 TCP_NODELAY
, /* name of option */
1468 (char *)&flag
, /* the cast is historical cruft */
1469 sizeof(int)); /* length of option value */
1471 bool save_poll
= jtag_poll_get_enabled();
1473 /* polling will screw up the "connection" */
1474 jtag_poll_set_enabled(false);
1478 jtag_poll_set_enabled(save_poll
);
1487 #ifdef WATCHDOG_BASE
1488 /* If we connect to port 8888 we must send a char every 10s or the board resets itself */
1489 static void watchdog_server(cyg_addrword_t data
)
1491 int so_reuseaddr_option
= 1;
1494 if ((fd
= socket(AF_INET
, SOCK_STREAM
, 0)) == -1)
1496 LOG_ERROR("error creating socket: %s", strerror(errno
));
1500 setsockopt(fd
, SOL_SOCKET
, SO_REUSEADDR
, (void*) &so_reuseaddr_option
,
1503 struct sockaddr_in sin
;
1504 unsigned int address_size
;
1505 address_size
= sizeof(sin
);
1506 memset(&sin
, 0, sizeof(sin
));
1507 sin
.sin_family
= AF_INET
;
1508 sin
.sin_addr
.s_addr
= INADDR_ANY
;
1509 sin
.sin_port
= htons(8888);
1511 if (bind(fd
, (struct sockaddr
*) &sin
, sizeof(sin
)) == -1)
1513 LOG_ERROR("couldn't bind to socket: %s", strerror(errno
));
1517 if (listen(fd
, 1) == -1)
1519 LOG_ERROR("couldn't listen on socket: %s", strerror(errno
));
1526 int watchdog_ip
= accept(fd
, (struct sockaddr
*) &sin
, &address_size
);
1528 /* Start watchdog, must be reset every 10 seconds. */
1529 HAL_WRITE_UINT32(WATCHDOG_BASE
+ 4, 4);
1531 if (watchdog_ip
< 0)
1533 LOG_ERROR("couldn't open watchdog socket: %s", strerror(errno
));
1538 setsockopt(watchdog_ip
, /* socket affected */
1539 IPPROTO_TCP
, /* set option at TCP level */
1540 TCP_NODELAY
, /* name of option */
1541 (char *)&flag
, /* the cast is historical cruft */
1542 sizeof(int)); /* length of option value */
1548 if (read(watchdog_ip
, &buf
, 1) == 1)
1551 HAL_WRITE_UINT32(WATCHDOG_BASE
+ 8, 0x1234);
1552 /* Echo so we can telnet in and see that resetting works */
1553 write(watchdog_ip
, &buf
, 1);
1556 /* Stop tickling the watchdog, the CPU will reset in < 10 seconds
1569 int interface_jtag_add_sleep(uint32_t us
)
1578 int zy1000_init(void)
1581 LOG_USER("%s", ZYLIN_OPENOCD_VERSION
);
1584 ZY1000_POKE(ZY1000_JTAG_BASE
+ 0x10, 0x30); // Turn on LED1 & LED2
1586 setPower(true); // on by default
1589 /* deassert resets. Important to avoid infinite loop waiting for SRST to deassert */
1591 zy1000_speed(jtag_get_speed());
1595 cyg_thread_create(1, tcpip_server
, (cyg_addrword_t
) 0, "tcip/ip server",
1596 (void *) tcpip_stack
, sizeof(tcpip_stack
),
1597 &tcpip_thread_handle
, &tcpip_thread_object
);
1598 cyg_thread_resume(tcpip_thread_handle
);
1599 #ifdef WATCHDOG_BASE
1600 cyg_thread_create(1, watchdog_server
, (cyg_addrword_t
) 0, "watchdog tcip/ip server",
1601 (void *) watchdog_stack
, sizeof(watchdog_stack
),
1602 &watchdog_thread_handle
, &watchdog_thread_object
);
1603 cyg_thread_resume(watchdog_thread_handle
);
1612 struct jtag_interface zy1000_interface
=
1615 .supported
= DEBUG_CAP_TMS_SEQ
,
1616 .execute_queue
= NULL
,
1617 .speed
= zy1000_speed
,
1618 .commands
= zy1000_commands
,
1619 .init
= zy1000_init
,
1620 .quit
= zy1000_quit
,
1622 .speed_div
= zy1000_speed_div
,
1623 .power_dropout
= zy1000_power_dropout
,
1624 .srst_asserted
= zy1000_srst_asserted
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)