cmsis-dap: add initial cmsis-dap support
[openocd.git] / src / target / adi_v5_cmsis_dap.c
1 /***************************************************************************
2 * Copyright (C) 2013 by mike brown *
3 * mike@theshedworks.org.uk *
4 * *
5 * Copyright (C) 2013 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
7 * *
8 * This program is free software; you can redistribute it and/or modify *
9 * it under the terms of the GNU General Public License as published by *
10 * the Free Software Foundation; either version 2 of the License, or *
11 * (at your option) any later version. *
12 * *
13 * This program is distributed in the hope that it will be useful, *
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
16 * GNU General Public License for more details. *
17 * *
18 * You should have received a copy of the GNU General Public License *
19 * along with this program; if not, write to the *
20 * Free Software Foundation, Inc., *
21 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
22 ***************************************************************************/
23
24 /**
25 * @file
26 * Utilities to support ARM "CMSIS-DAP", The CoreSight Debug Access Port.
27 * This is coupled to recent versions of ARM's "CoreSight" debug framework.
28 * This specific code is a transport level interface, with
29 * "target/arm_adi_v5.[hc]" code understanding operation semantics,
30 * shared with the SWD & JTAG transports.
31 */
32
33 #ifdef HAVE_CONFIG_H
34 #include "config.h"
35 #endif
36
37 #include "arm.h"
38 #include "arm_adi_v5.h"
39 #include <helper/time_support.h>
40
41 #include <transport/transport.h>
42 #include <jtag/interface.h>
43
44 #include <jtag/swd.h>
45
46 #define CMSIS_CMD_DP (0 << 0) /* set only for AP access */
47 #define CMSIS_CMD_AP (1 << 0) /* set only for AP access */
48 #define CMSIS_CMD_READ (1 << 1) /* set only for read access */
49 #define CMSIS_CMD_WRITE (0 << 1) /* set only for read access */
50 #define CMSIS_CMD_A32(n) ((n)&0x0C) /* bits A[3:2] of register addr */
51 #define CMSIS_CMD_VAL_MATCH (1 << 4) /* Value Match */
52 #define CMSIS_CMD_MATCH_MSK (1 << 5) /* Match Mask */
53
54 /* YUK! - but this is currently a global.... */
55 extern struct jtag_interface *jtag_interface;
56
57 static int (cmsis_dap_queue_ap_abort)(struct adiv5_dap *dap, uint8_t *ack)
58 {
59 LOG_DEBUG("CMSIS-ADI: cmsis_dap_queue_ap_abort");
60
61 /* FIXME: implement this properly cmsis-dap has DAP_WriteABORT()
62 * for now just hack @ everything */
63 return jtag_interface->swd->write_reg(
64 (CMSIS_CMD_DP | CMSIS_CMD_WRITE | CMSIS_CMD_A32(DP_ABORT)), 0x1e);
65 }
66
67 static int cmsis_dap_queue_dp_read(struct adiv5_dap *dap, unsigned reg, uint32_t *data)
68 {
69 LOG_DEBUG("CMSIS-ADI: cmsis_dap_queue_dp_read %d", reg);
70
71 int retval = jtag_interface->swd->read_reg(
72 (CMSIS_CMD_DP | CMSIS_CMD_READ | CMSIS_CMD_A32(reg)), data);
73
74 if (retval != ERROR_OK) {
75 /* fault response */
76 uint8_t ack = retval & 0xff;
77 cmsis_dap_queue_ap_abort(dap, &ack);
78 }
79
80 return retval;
81 }
82
83 static int cmsis_dap_queue_idcode_read(struct adiv5_dap *dap, uint8_t *ack, uint32_t *data)
84 {
85 LOG_DEBUG("CMSIS-ADI: cmsis_dap_queue_idcode_read");
86
87 int retval = cmsis_dap_queue_dp_read(dap, DP_IDCODE, data);
88 if (retval != ERROR_OK)
89 return retval;
90
91 *ack = retval;
92
93 return ERROR_OK;
94 }
95
96 static int (cmsis_dap_queue_dp_write)(struct adiv5_dap *dap, unsigned reg, uint32_t data)
97 {
98 LOG_DEBUG("CMSIS-ADI: cmsis_dap_queue_dp_write %d 0x%08" PRIx32, reg, data);
99
100 /* setting the ORUNDETECT bit causes issues for some targets,
101 * disable until we find out why */
102 if (reg == DP_CTRL_STAT) {
103 LOG_DEBUG("disabling overrun detection");
104 data &= ~CORUNDETECT;
105 }
106
107 int retval = jtag_interface->swd->write_reg(
108 (CMSIS_CMD_DP | CMSIS_CMD_WRITE | CMSIS_CMD_A32(reg)), data);
109
110 if (retval != ERROR_OK) {
111 /* fault response */
112 uint8_t ack = retval & 0xff;
113 cmsis_dap_queue_ap_abort(dap, &ack);
114 }
115
116 return retval;
117 }
118
119 /** Select the AP register bank matching bits 7:4 of reg. */
120 static int cmsis_dap_ap_q_bankselect(struct adiv5_dap *dap, unsigned reg)
121 {
122 uint32_t select_ap_bank = reg & 0x000000F0;
123
124 if (select_ap_bank == dap->ap_bank_value)
125 return ERROR_OK;
126
127 dap->ap_bank_value = select_ap_bank;
128 select_ap_bank |= dap->ap_current;
129
130 return cmsis_dap_queue_dp_write(dap, DP_SELECT, select_ap_bank);
131 }
132
133 static int (cmsis_dap_queue_ap_read)(struct adiv5_dap *dap, unsigned reg, uint32_t *data)
134 {
135 LOG_DEBUG("CMSIS-ADI: cmsis_dap_queue_ap_read %d", reg);
136
137 int retval = cmsis_dap_ap_q_bankselect(dap, reg);
138 if (retval != ERROR_OK)
139 return retval;
140
141 retval = jtag_interface->swd->read_reg(
142 (CMSIS_CMD_AP | CMSIS_CMD_READ | CMSIS_CMD_A32(reg)), data);
143
144 if (retval != ERROR_OK) {
145 /* fault response */
146 uint8_t ack = retval & 0xff;
147 cmsis_dap_queue_ap_abort(dap, &ack);
148 }
149
150 return retval;
151 }
152
153 static int (cmsis_dap_queue_ap_write)(struct adiv5_dap *dap, unsigned reg, uint32_t data)
154 {
155 LOG_DEBUG("CMSIS-ADI: cmsis_dap_queue_ap_write %d 0x%08" PRIx32, reg, data);
156
157 /* TODO: CSW_DBGSWENABLE (bit31) causes issues for some targets
158 * disable until we find out why */
159 if (reg == AP_REG_CSW)
160 data &= ~CSW_DBGSWENABLE;
161
162 int retval = cmsis_dap_ap_q_bankselect(dap, reg);
163 if (retval != ERROR_OK)
164 return retval;
165
166 retval = jtag_interface->swd->write_reg(
167 (CMSIS_CMD_AP | CMSIS_CMD_WRITE | CMSIS_CMD_A32(reg)), data);
168
169 if (retval != ERROR_OK) {
170 /* fault response */
171 uint8_t ack = retval & 0xff;
172 cmsis_dap_queue_ap_abort(dap, &ack);
173 }
174
175 return retval;
176 }
177
178 static int (cmsis_dap_queue_ap_read_block)(struct adiv5_dap *dap, unsigned reg,
179 uint32_t blocksize, uint8_t *buffer)
180 {
181 LOG_DEBUG("CMSIS-ADI: cmsis_dap_queue_ap_read_block 0x%08" PRIx32, blocksize);
182
183 int retval = jtag_interface->swd->read_block(
184 (CMSIS_CMD_AP | CMSIS_CMD_READ | CMSIS_CMD_A32(AP_REG_DRW)),
185 blocksize, buffer);
186
187 if (retval != ERROR_OK) {
188 /* fault response */
189 uint8_t ack = retval & 0xff;
190 cmsis_dap_queue_ap_abort(dap, &ack);
191 }
192
193 return retval;
194 }
195
196 /** Executes all queued DAP operations. */
197 static int cmsis_dap_run(struct adiv5_dap *dap)
198 {
199 LOG_DEBUG("CMSIS-ADI: cmsis_dap_run");
200 /* FIXME: for now the CMSIS-DAP interface hard-wires a zero-size queue. */
201
202 return ERROR_OK;
203 }
204
205 const struct dap_ops cmsis_dap_ops = {
206 .is_swd = true,
207 .queue_idcode_read = cmsis_dap_queue_idcode_read,
208 .queue_dp_read = cmsis_dap_queue_dp_read,
209 .queue_dp_write = cmsis_dap_queue_dp_write,
210 .queue_ap_read = cmsis_dap_queue_ap_read,
211 .queue_ap_write = cmsis_dap_queue_ap_write,
212 .queue_ap_read_block = cmsis_dap_queue_ap_read_block,
213 .queue_ap_abort = cmsis_dap_queue_ap_abort,
214 .run = cmsis_dap_run,
215 };
216
217 static const struct command_registration cmsis_dap_commands[] = {
218 {
219 /*
220 * Set up SWD and JTAG targets identically, unless/until
221 * infrastructure improves ... meanwhile, ignore all
222 * JTAG-specific stuff like IR length for SWD.
223 *
224 * REVISIT can we verify "just one SWD DAP" here/early?
225 */
226 .name = "newdap",
227 .jim_handler = jim_jtag_newtap,
228 .mode = COMMAND_CONFIG,
229 .help = "declare a new CMSIS-DAP"
230 },
231 COMMAND_REGISTRATION_DONE
232 };
233
234 static const struct command_registration cmsis_dap_handlers[] = {
235 {
236 .name = "cmsis-dap",
237 .mode = COMMAND_ANY,
238 .help = "cmsis_dap command group",
239 .chain = cmsis_dap_commands,
240 },
241 COMMAND_REGISTRATION_DONE
242 };
243
244 static int cmsis_dap_select(struct command_context *ctx)
245 {
246 LOG_DEBUG("CMSIS-ADI: cmsis_dap_select");
247
248 int retval = register_commands(ctx, NULL, cmsis_dap_handlers);
249
250 if (retval != ERROR_OK)
251 return retval;
252
253 /* FIXME: This needs a real overhaul!! FIXME
254 * be sure driver is in SWD mode; start
255 * with hardware default TRN (1), it can be changed later
256 * we use a bogus 'swd' driver to implement cmsis-dap as it is quite similar */
257
258 const struct swd_driver *swd = jtag_interface->swd;
259 if (!swd || !swd->read_reg || !swd->write_reg || !swd->init) {
260 LOG_ERROR("no SWD driver?");
261 return ERROR_FAIL;
262 }
263
264 retval = swd->init(1);
265 if (retval != ERROR_OK) {
266 LOG_ERROR("unable to init CMSIS-DAP driver");
267 return retval;
268 }
269
270 return retval;
271 }
272
273 static int cmsis_dap_init(struct command_context *ctx)
274 {
275 struct target *target = get_current_target(ctx);
276 struct arm *arm = target_to_arm(target);
277 struct adiv5_dap *dap = arm->dap;
278 uint32_t idcode;
279 int status;
280
281 LOG_DEBUG("CMSIS-ADI: cmsis_dap_init");
282
283 /* Force the DAP's ops vector for CMSIS-DAP mode.
284 * messy - is there a better way? */
285 arm->dap->ops = &cmsis_dap_ops;
286
287 /* FIXME validate transport config ... is the
288 * configured DAP present (check IDCODE)?
289 * Is *only* one DAP configured?
290 *
291 * MUST READ IDCODE
292 */
293
294 /* Note, debugport_init() does setup too */
295
296 #if 0
297 const struct swd_driver *swd = jtag_interface->swd;
298 if (!swd || !swd->read_reg || !swd->write_reg || !swd->init) {
299 LOG_ERROR("no SWD driver?");
300 return ERROR_FAIL;
301 }
302
303 int retval = swd->init(1);
304 if (retval != ERROR_OK) {
305 LOG_ERROR("unable to init CMSIS-DAP driver");
306 return retval;
307 }
308 #endif
309
310 uint8_t ack;
311
312 status = cmsis_dap_queue_idcode_read(dap, &ack, &idcode);
313
314 if (status == ERROR_OK)
315 LOG_INFO("IDCODE 0x%08" PRIx32, idcode);
316
317 /* force clear all sticky faults */
318 cmsis_dap_queue_ap_abort(dap, &ack);
319
320 /* this is a workaround to get polling working */
321 jtag_add_reset(0, 0);
322
323 return status;
324 }
325
326 static struct transport cmsis_dap_transport = {
327 .name = "cmsis-dap",
328 .select = cmsis_dap_select,
329 .init = cmsis_dap_init,
330 };
331
332 static void cmsis_dap_constructor(void) __attribute__((constructor));
333 static void cmsis_dap_constructor(void)
334 {
335 transport_register(&cmsis_dap_transport);
336 }
337
338 /** Returns true if the current debug session
339 * is using CMSIS-DAP as its transport.
340 */
341 bool transport_is_cmsis_dap(void)
342 {
343 return get_current_transport() == &cmsis_dap_transport;
344 }

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)